An expert who has written 20 answers of more than 400 characters.
An expert who has answered 20 questions.
Re: Authorized Service Rep in Philadelphia, PA ??
The only authorized repair service center is the one in Clovis, CA.....Pelco shut down the one in Orangeburg, NY...The one in Clovis is 3500 Pelco Way Clovis, CA 93612 and their phone number is 1-800-289-9100....ask for the service and repair department.....the do free quotes on all repairs...Good Luck and let me know if this helped cbinny1
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you forget the power-on password, you have a more difficult problem. Since the power-on password was designed to provide complete security, you will need to contact an HP-authorized service center for assistance. All data on the hard drive will be removed during the service.
WARNING: If you forget the power-on password, the computer must be reset at an HP-certified repair center. Please contact HP to schedule a repair. The Drive Lock password cannot be reset. If you lose or forget the Drive Lock password, the hard drive must be replaced. Please contact HP to order a new hard drive. These services are not covered by the warranty.
On your motherboard, Just below the PCIe X1 slot (The shortest one on the board) you will find a silver disc (Watch style battery)
Remove this and set aside.
On the lower left of your board there is a series of four SATA connectors, just above #1 connector is your Front panel wire header. Just above that there should be a 3 pin connector with a jumper block on the top and middle pins. Remove this block and set aside.
Now for the hardest part. We need to wait for an hour.
OK now that the hours up replace the battery, Replace the power cord. and boot up the PC. Do you get into the BIOS?
If so then power off the system, unplug the power cord and replace the CMOS jumper on pins 1 & 2 on the 3 pin connector.
If resetting the CMOS of the BIOS in this manner does not get you back up, then I'm sorry to tell you there is no simple fix. The board will need to be serviced by an authorized repair facility that has an EPROM recorder. You can check with Intel customer support for details of the nearest authorized repair facility.
Unfortunately, the issue you describe seems to indicate that your
product requires repair service. Canon has excellent service options
and are eager to provide any assistance you may need. Click the link
below to locate an authorized service facility and obtain further
instructions. Find a Service Location