Question about D-Link DP 301U (DP-301U) Print Server

6 Answers

D-Link DP-300U My brother gave me this equipment, he forgot the password. Used psadmin, but can't reset without password.

Posted by on

  • Anonymous Apr 13, 2009

    i forget my acces Password for D-Link DP-300u print server Password

×

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

The DP-300U can be accessed with the password SYSxxxx, where "xxxx" is the last four digits of the unit's MAC address. The MAC address can be found printed on a sticker on the bottom of the unit.

Posted on Aug 02, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Unplug / turn off the device, press and hold the reset button on the rear of the unit (usually a small hole you have to put the end of a paperclip into) plug the unit in / turn it back on and continue to hold for about 15 seconds. Let go of the button leave it 30 seconds or so then turn it back off and on again, give it 30 seconds or so to restart and it should be reset to the factory defaults.

Posted on Jun 10, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Power on. All fans working but not coming screen. How to reset . Polaris 30 R 1.05

Posted on Nov 29, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

U can get ip from wireshark , scaning network traffic but i dont know how to get user and password

Posted on Sep 17, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

DLink forgot manual password for reset too.

Posted on Dec 20, 2012

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

We dont have solution for this one . You should contact to manufacture only

Posted on May 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I had forgot the printer server password. i had


Unfortunately, I don't know of a way to manually reset this without using the web-interface.

However, if it was somehow reset already, the default password for this unit is nothing. They do not use a password by default, so try it without one.

Good luck!

Ryan

Dec 02, 2009 | D-Link DP 301P (DP-301P) Print Server

2 Answers

I already change the ip address of my d-link dp-300u printserver and then i accidentally remove the check in the the tcip selection, when i reset again i can't see my printserver. how can i reset it to...


Reset button is in back panel of printer sertver.
Press it for 10 seconds.
Then all settings goes to defaults.
Reset button is small round in back side of router you can press it's pin with any ball -pen.
Let me know if you need further assistance.Thanks.

Nov 11, 2009 | D-Link DP 300U (DP-300U) Print Server

2 Answers

How can I reset my printer derver dp-300 to factory defualt values? Close


how reset password for dlink 300 print server please give me solution

Nov 11, 2009 | D-Link DP 300U (DP-300U) Print Server

4 Answers

Can't reset password D-link DP-300U


Can anyone tell me, what IP Address when reset to default? thx's...

Sep 05, 2009 | D-Link DP 300U (DP-300U) Print Server

2 Answers

There is no reset button


dear
Better way when you take new dp 300u unit in box cd in cd admin software run you can reset button is there please check

May 11, 2009 | D-Link DP-300U (DHDP300U) Print Server

2 Answers

Hi , please i have forgot my password Dlink dp 300u ,can you help me please?


Try using the psadmin software to do a factory reset. If it demands a password to do this, try using "SYSxxxx" (where xxxx stands for the last four digits of the MAC address written on the underside of the server. If you don't have the psadmin software you may be able to download it off the internet. After doing the reset you will need to follow the Quick Install Guide to set up the server. If you lost the Quick Install Guide you can download a new one from D-link's website. The following link may also be helpful: http://www.fixya.com/support/t224263-dp301p_psadmin_password_forgoten

Apr 20, 2009 | D-Link DP-300U (DHDP300U) Print Server

1 Answer

Forgotted the Ip of D-Link DP 300U print server


You may use the PSAdmin software to configure your print server even if you don't know the IP address. The only requirement is that the DP-300U has to be in the same network (subnet) as your PC running PSAdmin. In the PSAdmin, you will then be able to view or change the IP address.

Here is the link to download PSAdmin:
http://support.dlink.com/products/view.asp?productid=DP%2D300U#apps

Remember that if you also have forgotten the Admin password, you will have to ship the unit to D-Link in order to have it factory reset.

May 10, 2008 | D-Link DP 301P (DP-301P) Print Server

1 Answer

Dp301p+ psadmin password was forgoten


Reset The Printserver from Backside & Gave PAssword again

Mar 04, 2008 | D-Link DP 301U (DP-301U) Print Server

3 Answers

Dp301p+ psadmin password was forgoten


Problems with your D-Link DP-300U LOST IP If you’re like me, you have a ton of computer **** laying around your house. Today I found an old D-Link DP-300U print server laying around and thought that I could put it to good use. The bad thing about these things is the fact that they do not have a hardware reset button on them, so if you forget the IP or the Password, you’re pretty much hosed… or so I thought. After doing some google searches for how to find a lost IP, I came back empty. The PS Admin program that D-Link publishes for use with this thing couldn’t find it on my network either. After some thinking, I came up with an idea.
If you know anything about networking and how networks work, you should have thought about this too. Get a Wireshark capture running. Unplug the power from the print server and then replug it. It’s going to send out an ARP on the network looking for it’s gateway which should be picked up by Wireshark. It should look like this:
capture.jpg In my case, it came back as 192.168.1.253. After changing the IP on my laptop to fit that subnet, I was able to log into it via it’s web interface (there was no password on it thank God!) and put it back to factory settings. Voila! What once was a brick is now a working print server!

I Copied it!

Shafiuddin Russel
infoshafi@gmail.com
+8801714073692

Feb 16, 2008 | D-Link DP-300U (DHDP300U) Print Server

3 Answers

Password was forgot psadmin of 301p


viaujocposted a brilliant solution which worked for my DP-300U: see http://www.fixya.com/support/t224263-dp301p_psadmin_password_forgoten

To paraphrase,
First try logging in with the following
username: psadmin
password: SYSXXXX
(where XXXX is the last four digits of the mac address)
If it works, you can proceed to reset the password.

Alternatively, you may be able to extract the original password from a configuration backup, if you have one. For details, see http://www.fixya.com/support/t224263-dp301p_psadmin_password_forgoten

Oct 17, 2007 | D-Link DP 301P (DP-301P) Print Server

Not finding what you are looking for?
D-Link DP 301U (DP-301U) Print Server Logo

5,191 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...