Question about Ariston Technologies LI640S Dishwasher

2 Answers

Stars cycle thin stops lights reg and eco start blinking

Problem with ariston li 640 sna

Posted by on

  • goaliesmom May 03, 2008

    I am having the same problem. I've tried unplugging it as well as turning it off for a few minutes and then holding the function button down while I turn the dishwasher back on. I can't get it to reset. I know this happened once before and it was something easy. Please help!

  • Anonymous Dec 09, 2008

    Hello dear friends!



    I've got the same problem with an Ariston LI 640 A... the 2th and the 4th led blinking at first minute that I power on the dishwasher... I clean the filters but the problem remains... Is it possible to disassemble the big white piece that hold the main filter? I think that the problem is close to the filter, but I'm not a dishwasher technician..



    Thanks a lot for your answer !



    :-)

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Clean out the filter really well, then replace it. This should reset the dishwasher. If it does it again when you try to run the dishwasher. Take the filter out and re-seat it. Some times it's not sitting exactly right. Good luck and I hope that helps.

Posted on Nov 14, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem. Ariston LI640s second and fourth lights. Filter is set and clean??

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, our ariston dishwasher has stopped before the cycle finished and the water has not drained out. There are 2 flashing lights - the brush emblem and the spray ' on a tilt' emblem (the 2 on the...


Error messages.
The dishwasher is equipped with a
safety system which is able to
detect any operating anomalies.
These anomalies are signalled by
the rapid flashing of one of the
wash cycle indicator lights M.
If the indicator light for the soak
cycle flashes (see wash cycle table),
cancel the wash cycle by following
the instructions indicated in the
"Modifying a wash cycle in
progress" paragraph on page 4.
Now check whether there is any
water in the mains supply and that
the tap is turned on; if the error
message persists, then call for
technical assistance, indicating
which message appeared.
If the indicator light for any wash
cycle apart from the soak cycle
flashes rapidly, turn the appliance
off and call for technical
assistance, indicating which
message appeared.
Troubleshooting
You have checked
everything, but the
dishwasher still doesn't
work and the problem
persists?
Call an authorised service centre
near you and remember to mention:
? the type of malfunction
? the model mark (Mod?.) and the
serial number (S/N?.) indicated on
the rating plate located on the inner
door, to one side.

If you need further help, reach me via phone at https://www.6ya.com/expert/kelley_9a924afdf232bd4d

Jan 14, 2018 | Hotpoint-Ariston LI 640 24 in Builtin...

1 Answer

Ariston L64 dishwasher first 2 lights flashing what does this mean please!


Ariston LI6401-Washed a load. Last light on R control panel (Eco Wash) is blinking rapidly and didn't dry the dished.Turned pwer off then on. Did same type of wash. New maching-This is about the 6th wash

Mar 16, 2011 | Ariston Technologies LI640S Dishwasher

1 Answer

Ariston LI 45 door will not remain closed and will


Strip the door and re-set the switch. Ensure the metal part of the catch on the machines main body is not distorted

Jan 31, 2010 | Ariston Technologies Dishwashers

2 Answers

Poor washing and drying


I have the same problem. Could you please let me know if you find a solution. I will do the same.

Jan 09, 2010 | Ariston Technologies LI640S Dishwasher

1 Answer

Ariston L63 dishwasher stopped mid cycle with water in base.


1) Ensure the dishwasher is turned off. 2) (may not apply) Turn the plastic blue lever located under the sink to the vertical position (this opens the valve, so water can go into the dishwasher) 3) Pour powder indo the dishwasher 4) Turn the dishwasher controller to the top position (the 12 o?clock position) ? this is the eco-setting. 5) Press the on/power button on the dishwasher, so that it now turned on (a light will display) 6) Move the dishwasher controller to the ?R? position (it?s on the very left), and leave it there a second or two. 7) Move the dishwasher controller back to the eco-setting (the 12 o?clock position

Jun 16, 2009 | Ariston Technologies L63 Free-Standing...

1 Answer

My Ariston LI 700 I dishwasher doesn't complete wash cycle


dear customer,

 we recommend u to perform the following checks on ur dishwasher,
  1. Test the timer motor
  2. Test the thermostat
  3. Test the heating element
for more details for self test instructions try the link http://www.acmehowto.com/howto/appliance/dishwasher/dishwasher.php
Plz rate this solution.. thank you.. 

Apr 08, 2009 | Dishwashers

1 Answer

Ariston Dishwasher LI 675 DUO


1) Ensure the dishwasher is turned off.
2) (may not apply) Turn the plastic blue lever located under the sink to the vertical position (this opens the valve, so water can go into the dishwasher)
3) Pour powder indo the dishwasher
4) Turn the dishwasher controller to the top position (the 12 o’clock position) – this is the eco-setting.
5) Press the on/power button on the dishwasher, so that it now turned on (a light will display)
6) Move the dishwasher controller to the “R” position (it’s on the very left), and leave it there a second or two.
7) Move the dishwasher controller back to the eco-setting (the 12 o’clock position

Sep 16, 2008 | Ariston Technologies LI640S Dishwasher

Not finding what you are looking for?
Ariston Technologies LI640S Dishwasher Logo

Related Topics:

1,350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Marvin
Marvin

Level 3 Expert

82208 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Are you an Ariston Technologies Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...