Question about Ricoh Aficio 2020 All-In-One Laser Printer

1 Answer

How do we configure the IP Address & subnet mask

For some reason our scanner has lost all of the network destinations how do we reinstall these?

Posted by on

  • chintan317 Mar 16, 2009

    For some reason our scanner has lost all of the network destinations how do we reinstall these?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does it say copier not found?


First we need more information.Are you connected via network or another connection?If you are connected via network you need to configure your network.There is a address that your computer uses to communicate with your printer called an IP address and subnet .mask example of IP address is 192.168.72.1 and example of subnet mask is 255.255,255,0.Also the Gateway example 192.168.72.0 You can find this information on your computer by going to device or printers in the right hand column of the start menu.On your copy machine there is a menu where you want to look at network or print out a configuration page which will have network config.Also make sure the copier is showing up in the device and printer menu.If not hit add printer and find your device in drop down menu and add and it will load your printer driver.Sorry for so much information but your question doesn't go into enough detail.

Apr 26, 2014 | Xerox WorkCentre Pro 90 Copier

1 Answer

Ethernet cable network doesn't work on my MP4000


You can use wifi OR ethernet, configure in user tools. -Carl

Mar 26, 2014 | Ricoh Printers & Copiers

1 Answer

I just configured my MFC 490cw for wireless printing. It works but now I have IP address conflicts across all computers XP & Windows 7) and X-box in the house. If I turn the printer off, the network...


When configuring an address for the printer, the IP configuration might look like (just an example):

IP Address - 192.168.1.2

Subnet Mask - 255.255.255.0

Default Gateway - 192.168.1.1

It's important to note that even though you are not using any IP addresses in the default range for DHCP, the Subnet Mask and Default Gateway addresses will be THE SAME.

If you have another device on your network that will be assign a fixed address, you would use for example:

IP Address - 192.168.1.3

Subnet Mask - 255.255.255.0

Default Gateway - 192.168.1.1

For any other devices, just increment the IP address by one, 192.168.1.4, 192.168.1.5, etc and use the same Subnet Mask and Default Gateway.
(see the owners manual or site for steps on configuraing the printer TCP/IP information). This should take care of any conflicts.

Jan 29, 2011 | Brother MFC 490cw Color Inkjet...

1 Answer

How could i change the ip addres my hp 4015n ?


Configure the network product View or change network settings
1. Type the IP address into the address line of a Web browser to open the embedded Web server. 2. Click the Networking tab to obtain network information. You can change settings as needed.
Manually configure IPv4 TCP/IP parameters from the control panel In addition to using the embedded Web server, you can also use the control-panel menus to set an IPv4 address, subnet mask, and default gateway. 1. Press Menu . 2. Press the down arrow to highlight CONFIGURE DEVICE, and then press OK. 3. Press the down arrow to highlight I/O, and then press OK. 4. Press the down arrow to highlight EMBEDDED JETDIRECT MENU, and then press OK. 5. Press the down arrow to highlight TCP/IP, and then press OK. 6. Press the down arrow to highlight IPV4 SETTINGS, and then press OK. 7. Press the down arrow to highlight MANUAL SETTINGS, and then press OK. 8. Press the down arrow to highlight IP ADDRESS, and then press OK. -or- Press the down arrow to highlight SUBNET MASK, and then press OK. -or- Press the down arrow to highlight DEFAULT GATEWAY, and then press OK. 9. Use the numeric keypad, or press the up arrow or the down arrow to increase or decrease the number for the first byte of the IP address, subnet mask, or default gateway. 10. Press OK to move to the next set of numbers. To move to the previous set of numbers, press the back arrow . 11. Repeat steps 9 and 10 until the IP address, subnet mask, or default gateway is complete, and then press OK to save the setting. 12. Press Menu to return to the Ready state.

Jan 14, 2011 | HP LaserJet P4015N Printer

1 Answer

Hi, I have two printer HP 4015n, I installed them on the same time in the same office (two month ago). They worked fine, but this morning all lights keep flashing ( both printer) and can't print. Any...


Thank you for contacting FixYa with your printer inquiry.
Sounds like both these network printers have lost connection to your router or failed to obtain an IP address after server maintenance or network upgrades.
Would suggest printing a configuration page on each of the printers and determine what the IP address is (If there is one) and see if other devices are in conflict. Power down your printers and reseat your Jetdirect Network Cards and confirm cable connections. Re-Power the printers and print configuration again to see if obtaining IP address.
Find out what IP address are to be assigned these printers and manually configure via embedded Web Server or at the printer control panel. Consult your manual or Follow these steps:
Configure the network product View or change network settings
1. Type the IP address into the address line of a Web browser to open the embedded Web server. 2. Click the Networking tab to obtain network information. You can change settings as needed.
Manually configure IPv4 TCP/IP parameters from the control panel In addition to using the embedded Web server, you can also use the control-panel menus to set an IPv4 address, subnet mask, and default gateway. 1. Press Menu . 2. Press the down arrow to highlight CONFIGURE DEVICE, and then press OK. 3. Press the down arrow to highlight I/O, and then press OK. 4. Press the down arrow to highlight EMBEDDED JETDIRECT MENU, and then press OK. 5. Press the down arrow to highlight TCP/IP, and then press OK. 6. Press the down arrow to highlight IPV4 SETTINGS, and then press OK. 7. Press the down arrow to highlight MANUAL SETTINGS, and then press OK. 8. Press the down arrow to highlight IP ADDRESS, and then press OK. -or- Press the down arrow to highlight SUBNET MASK, and then press OK. -or- Press the down arrow to highlight DEFAULT GATEWAY, and then press OK. 9. Use the numeric keypad, or press the up arrow or the down arrow to increase or decrease the number for the first byte of the IP address, subnet mask, or default gateway. 10. Press OK to move to the next set of numbers. To move to the previous set of numbers, press the back arrow . 11. Repeat steps 9 and 10 until the IP address, subnet mask, or default gateway is complete, and then press OK to save the setting. 12. Press Menu to return to the Ready state..
Hope this helps. Please keep us updated and remember to rate this answer.

Nov 22, 2010 | HP Laserjet P4015x Printer

2 Answers

HP Photosmart C7200 All-in-One Series is always going offline and then won't print-I am using it with my wireless computer. When I ask it to fix it, it now just says it's disconnected and that print job...


Try This :
Put the CD in the computer ;
Goto My computer- Right click on Black HP logo - Click on Explore - Open UTIL (Folder)- Open CCC (Folder)- Double Click on UNINSTALLATION L1 file;
Restart the computer
On the printer :-
Press the setup Button (button with the monkey range)
Goto Network Press Ok
Goto Run Wireless Setup Wizard
Run it (make sure you should have the WPA/WEP key ) ready with you
Select the Network and get it connected to the network
Then Install the Printer software from the CD
Then Select Add a Printer
and select Network
Finish the installation
Try to print
This should resolve the issue
Regards Soumajit

Oct 12, 2009 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

How to wirelessly print to HP 2410v Photosmart printer


This is the official how-to for network setup from HP:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00781863&lc=en&dlc=&cc=us&product=303759&lang=

Introduction Print the network configuration page and obtain the IP address, subnet mask, and default gateway address for the printer. Printing the network configuration page
  1. Press the Setup button.
  2. Press the arrow buttons to select Network and then press OK .
  3. Press the arrow buttons to select Print Network Configuration Page and then press OK . The Network Configuration Page prints.
Obtaining the IP address, subnet mask, and default gateway address The IP address, subnet mask, and default gateway address are printed on the Network Configuration Page


The manual link is here:
http://h10032.www1.hp.com/ctg/Manual/bpu70241.pdf


Hope this helps:

WizardRepair

Jul 18, 2009 | HP Printers & Copiers

1 Answer

Please help me to configure network scanner in develop ineo 250 model.If I check in Our Printer summery its showing optional printer is not configured but I give destination IP and folder path every...


alright follow these steps to properly configure the scanner on a network. first of all you need to make sure you have the proper drivers for the scanner. second, you need an IP, Subnet mask, and gateway that are all STATIC, not DHCP. you need to make sure that the folder you are trying to scan to is shared out correctly, and the scanner has full access rights to the folder, meaning a user name and password. if the folder is not shared out you will not be able to push a scanned image. any other questionns just let me know.

Jun 20, 2009 | Printers & Copiers

3 Answers

Setup scan to pc function


Find the scanner on the network... you can use a tool like Advanced IP Scanner to search the subnet and then just hunt down the IP that belongs to the device -- it may not have a name registered.  Visit each potential IP via browser (http://192.168.1.50), one will show you the Kyocera web page.  The device has two, one for printer, one for scanner.. each one on its own IP....
That's how far I've got with mine - i was hoping it supports SMB scanning, but it may not.  So now I am looking for the rest of the setup.

Dec 08, 2008 | Kyocera Mita KM-3035 All-In-One Laser...

Not finding what you are looking for?
Ricoh Aficio 2020 All-In-One Laser Printer Logo

Related Topics:

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Printers & Copiers Experts

quennie732

Level 2 Expert

393 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

181 Answers

Are you a Ricoh Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...