MAV5920 AGW how can i order a control board for maytag MAV5920 AGW

Unfortunately the problem you are having is caused by a failed main control board, the board will have to be replaced to repair it. You can order the new replacement board at the link below:
Brand New Genuine Maytag Neptune Dryer Control Board 33002576 eBay

You will need to replace the control board. Here is that part to order. Electronic Control Board
To replace the board you will need to remove the screws on the back of the console to access the control board. It is an easy repair.

The control board is faulty and will need to be replaced. Here is the part to order and it comes with a 365 day, any part, any reason return policy.

It means your main control board has malfunctioned and will need to be replaced. Here is the board to order.

Hi, it means you have an internal short in the display control board. You'll need to order and replace the relay control board in order to correct the issue. This control board is located on the far right corner under the control panel. Below is a link to the control board you'll need to order and replace. Click HERE.....

THIS MACHINE EVEN IN AMERICA WAS A DISASTER. MAYTAG MADE A HUGE MISTAKE WITH THIS LINE OF WASHERS. IT SOUNDS LIKE YOUR CONTROL BOARD IS PAD OR YOUR TOUCH PAD CONNECTION IS LOOSE. EITHER WAY YOU ARE OUT OF WARRANTY AND WILL BE PAYING OVER $400 TO GET THE PARTS MUCH LESS FIX IT. SORRY BUT YOU MIGHT NEED A NEW MACHINE.

OK, your control board and LED are integrated, so you will need to just replace the control board. I would try a hard reset before replacing the board. Pull the plug or, shut down the appropriate breaker switch for 5 minutes. Re apply power after the 5 minutes are up. if you continue to experience this fault, replace the control board asap.

CONTROL PANEL(CLICK HERE TO ORDER)

the board is the easiest fix you can have, just take the backsplash apart & swich it out, order from marcone.com with your model #

We called Maytag customer service and they resolved our problem and is sending us a new control board and sending out a technican to our home to install at no charge! What great service! Thank you Maytag!

I had the exact same problem. Maytag sent me a new main board which fixed the problem. It is pretty easy to install and is located behind the fridge behind a metal panel.