Question about Standard (CRT) Televisions

1 Answer

Suddenly went off!

Have a 'phillips magnavox smart plus' series 32 inch. about 6 or so years old. perfect picture and sound then BAM! nothing. any suggestions? just time for a new tv? tried unplugging and reseting, but nothing. everything else connected to the same surge protector works and i've tried to switch out the plugs to make sure it wasn't a bad connection.

Posted by on

  • Anonymous Mar 04, 2008

    I was watching tv, and it just went off, and would sound like it was trying to turn back on (by itself) and after that all i heard were clicks, as if it was turning on and off. It wasnt the outlet, everything around it was working fine, and the dvd player was not affected.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 518 Answers

This is a power supply issue. Probably in the high voltage stages. Maybe a fuse, regulator IC, or Horiz. Output transistor or all of them. If you don't know anything about TV repair, you should take it to a shop that will provide an estimate to you.

Geno

Posted on Mar 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't find install code for philips magnavox smart series plus


Universal remote codes for Philips Magnavox TV are: 0062 0204 0207 0183 0226 0288
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Sep 27, 2012 | Philips Smart Plus TP3285C 32" TV

2 Answers

No sound, no picture. tried unplugging and plugging back in...same problem. the green power light just keeps blinking 14 times over and over again. tv is around 11 yrs old...philips magnavox 32" smart...


check your h-out transistor, in high voltage area, capacitors and resistors, need reservicing and resoldering....hope you can do it, or check out with qualified tech

Oct 25, 2009 | Philips Magnavox TS3260C 32" TV

1 Answer

Front panel blocked or locked


RCA Entertainment Series 32" Plus Gold, GEMSTAR, xbox ready has been in the shop twice so far. Transformer replaced and 6 months later the picture suddenly had horizontal white lines that gradually spaced apart more from top to bottom and it had a gray hue and fuzzy, but I still watched it for 3 months that way. Today I turned it on and about a minute later I heard a loud crackling sound coming from the back and the picture disappeared, screen went black. Is it worth fixing again? Please contact me at ninalashua@yahoo.com

Jul 09, 2009 | RCA 32F531T 32" TV

1 Answer

Philips 27 inch TV - Model # 27PT543S37A - Keeps going off!


if you have back ground of tv repair, remove back cover but you need tools and tester, check heater line from crt ckt board going to horizontal section.

Apr 03, 2009 | Philips Magnavox TP3285C 32" TV

2 Answers

Need codes to unlock the smart block on my phillips magnavox tv


do you have a 3 digit code for RCA TV for the philips universal remote?

Dec 30, 2008 | Standard (CRT) Televisions

3 Answers

Phillips/magnavox smart series


I have a Smart Series 32" Phillips-Magnovox TV I bought april '99. Around July 4 weekend 2008 it decided it just does not want to come on any more! Was working just fine before that...I can not find my manual. Any suggestions?

Thanks,
cely
ceorunner@aol.com

Mar 04, 2008 | Philips Magnavox 27MS343S 27" TV

2 Answers

TV Problem


The first thing is to check to see if the fuse is blown,if so replace with a 5 amp fuse,fuse is located near were the power cord connects to the board,make sure set is disconnected from power.

Feb 28, 2008 | RCA F32672SB 32" TV

2 Answers

Black screen no sound


What is the model or chassel number it be a few thing H.O.T Resistor Caps etc..most likely horizontal output transistor.

Nov 12, 2007 | Standard (CRT) Televisions

1 Answer

No picture no sound nothing


We had a TV repairman look at our 3 year old (Oct 2004) Panasonic CT-32HXC14J FLAT SCREEN TV. It suddenly stopped working and appeared to have no power getting to it. It was a high voltage supply or transformer that was bad and has to be replaced - estimated cost is around $400. In a year we will also need to spend around $125 for a digital converter box. We went for the repair since that is still cheaper than a $1,000 plus equivalent size LCD or plasma.

Our old tube tv was still working after 15+ years. They aren't making them like they used to. Way to go Panasonic.

Nov 09, 2007 | Panasonic CT-32HXC14 32" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68229 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...