Question about Fuji FinePix F20 Digital Camera

2 Answers

FUJI F20 Won't Power Up - Good and Charged Battery

With a good and fully charged battery (checked for 3.6V after charge), this camera won't power up, nor show red led when it should charging battery. I charged battery externaly. Battery is inserted properly. Camera was working fine until it went 4 months in the drawer when battery runned out.

Is there any place I can send for repair?

Posted by on

  • 5 more comments 
  • bayraider77 Apr 27, 2008

    My Fuji Finepix F20 also will not power up. I recharged the old battery, then purchased and charged a new battery. Still will not power up. Can the camera be fixed?

    Dave Pyle

    davepyle@verizon.net

  • droessler May 14, 2008

    My camera also does not power up. I installed new batteries with no help.

  • fujibug May 19, 2008

    same as above

  • Anonymous Jul 23, 2008

    Me too :((

  • Anonymous Sep 30, 2008

    same problem, i bought a replacement battery too just in case that was the problem and it still won't power up. I'm thinking of sending it in for repair.

  • jammin220 Sep 30, 2008

    same problem, i bought a replacement battery too just in case that was
    the problem and it still won't power up. I'm thinking of sending it in
    for repair.

  • dagmawinegus Oct 27, 2008

    Fuji FinePix F20 Digital Camera

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Fuji FinePitteryx refuses to power up,even after new lith. batteries were installed

Posted on Oct 09, 2008

Same here ;(
Tried almost all kind of useless ideas and attempts to revive it. If somebody has a solution, please don't be shy :) Any help i apreciated

Posted on Jun 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won turn fully charged battery


How long you have the battery? I suggest you to fully discharged the battery and then charge it as much as you can, do this circle for several times. Hope this can help

Jul 23, 2013 | Fuji FinePix A330 Digital Camera

1 Answer

Can i charge with USB cord to dock and comp


Fuji FinePix Z2 Digital Camera

lens retracts fully into the body and is protected by an automatic metal cover - no more lost or dangling lens caps.
The F410 Zoom makes use of the new xD-Picture Card media that is smaller than a postage stamp. Fuji supplies a 16MB card and they are available now up to 256MB. The F410 is powered by a small proprietary lithium rechargeable battery. This battery pack performed well in our use and if the color LCD is used sparingly, I see no problem with the battery delivering enough power for a conservative day's use. As with any camera that uses a proprietary battery pack, it is always a good idea to purchase and carry a charged spare at all times. The included power supply / charger is an auto switch type and operates on 100-240V AC which is convenient when traveling. It charges the battery in 3 hours (or less) while in the camera and also functions as an AC power supply for extended use at home. The battery is also charged any time the camera is placed in the optional camera dock.

Dec 02, 2012 | Fuji FinePix Z2 Digital Camera

1 Answer

Blueparrrot B250 is 1 year old & it went dead so I


how do you know it is fully charged? i think it may be dead battery

Nov 06, 2012 | Computers & Internet

1 Answer

I have a Finepix xp50, with a fully charged, correctly installed battery, that won't turn on. It worked intermittantly for awhile. We have 3 batteries for this camera thinking it was the battery


Be sure your battery is in the right way. Try reversing it. My battery has 3 rounded corners and one square corner. The square corner goes against the latch.

Aug 21, 2012 | Fuji Finepix F50FD Digital Camera

1 Answer

Irobot roomba 500


If you're sure the battery contacts are clean and the battery really is charged, then there is faulty circuitry within the Roomba that would have to be repaired or replaced.

Confirm that the battery is inserted with the metal contacts down so they make contact with the spring terminals in the battery compartment.

Visually confirm that the metal contact plates on the battery pack, and the spring terminals in the battery compartment are clean and shiny. If not, wipe with a clean cloth or paper towel, its OK to use a little water or rubbing alcohol on the cloth, if needed, and then dry it.

Visually confirm that the metal contact plates on the Roomba, and the spring terminals on the docking station's home plate are clean and shiny. If not, wipe with a clean cloth or paper towel, its OK to use a little water or rubbing alcohol on the cloth, if needed, and then dry it.

If you have a volmeter, measure the voltage between the contacts on the battery pack If it isn't something in the neighborhood of 14 volts and is 11 volts or less, the battery isn't fully charged.

Reinstall the battery.

For the moment, please connect the power adapter directly to the Roomba rather than the docking station to eliminate one possible faultly connection.

If the battery wasn't fully charged, or you weren't able to test it, try to charge the Roomba and then retest the battery voltage if you can. If the battery voltage was higher immediately after charging, but didn't get to 14 volts, the charger is good, but battery needs to be replaced. If the battery voltage was unchanged after attempting to charge the Roomba, the charging circuitry may be faulty. If there was no light patterns when you tried to charge it, and it was plugged in to a good outlet, then the power adapter or charging circuitry is definitely bad.

If you have no voltmeter and you cleaned the contacts and tried to charge the Roomba and it works, use the Roomba and then recharge using the docking station and see if it was just dirty contacts or it won't charge through the docking station. If it didn't work, you'll need to figure out if its the battery, the charging circuitry in the Roomba, or the power adapter. If there are no lights when you try to charge the Roomba, then Either the power adapter or the Roomba power circuitry is defective, but without a voltmeter you can't find out which one, and there's no way to know if the battery is good or bad, but you know Roomba wasn't trying to charge it. If there are lights when you try to charge the Roomba, then at least you know the power adapter is good. Unfortunately, without being able to test something there's no way to distinguish between a charger that won't deliver a charge to the battery and a battery that won't accept a charge. If you want to take a guess then a bad battery is more common and less expensive to fix.

Jul 07, 2012 | iRobot Roomba 560 Robotic Vacuum

2 Answers

I have a brand new Nikon D3100. The battery was fully charged and placed in the camera. I took about 4 photos, and then turned the camera off. When I turned it back on the battery wasn't working to...


The solution to your problem is simple, Kathrynbax.


The battery never comes in fully charged. It's always charged only so you may be able to check if your camera is working. I suggest, you take out your battery and put it to charge for exactly 90 minutes as the manual says. Then I'm sure you won't face any such problems.


Hope this solves your problem.

Good day!

Rebel

Sep 17, 2011 | Nikon D3100 Digital Camera

1 Answer

My fujifilm z33 wp will not turn on-have charged the battery fully - it kept turning itself off before and now will not turn on


You won't believe this. I had the same problem with it not turning on. Charged the battery, cleaned the heads, made sure installed properly... asked my son the tech wiz and he figured it out.

Weirdly enough, you need to hold down the preview mode (arrow in box under "T") WHILE you are powering it on. It works now!

Feb 10, 2011 | Fuji Photography

1 Answer

Panasonic vx37


My old Panasonic Palmcorder IQ shows a red light in both switch positions-camera and VCR. Maybe yours has red for camera and green for VCR so you could tell them apart. I found that the Panasonic battery that came with the camera was the cheapest kind with the least charging time. I bought other batteries, they were good for a while, but now, many years later, they won' t hold a charge. Since I am only recording inside of my house, I have resorted to using the AC wall socket for power. I have to take the battery out of the camera. I found a power plug-in hole (like ones on cell phones) in the battery compartment. I also found one of these holes on my battery charger. My camera came with a double ended power plug. I plug one end into my camera and the other end into the battery charger. I plug the charger power cord into the wall outlet, and I have power to my older camera. Maybe you can find this double ended power cord at a store or on line.

Did you know that there are 2 kinds of batteries? Some have memories and others do not rely on a memory. The ones with memories have to be fully discharged or they will only charge a little, and keep charging less and less each time they are charged. The ones without the memory can be charged fully without being discharged fully. Check into battery information on line to get more information. Maybe you can get the non-memory kind.

May 18, 2009 | Panasonic NV-VX37 Mini DV Digital...

1 Answer

Fuji F10 No power


You said that you changed the battery, did you put it in the right way around?.

I had exactly the same trouble, changed the battery (got it on ebay for £2.99) charged it and it worked.

Having said that, I closed the lense from external power. If the camera wont operate from external power then the camera is probably dead.

Sep 13, 2008 | Fuji FinePix F10 Digital Camera

2 Answers

Lost AC Adaptor Fuji Finepix F20


Go to a reputable Fuji supplier, or www.fujifilm.co.uk

Nov 05, 2007 | Fuji FinePix F20 Digital Camera

Not finding what you are looking for?
Fuji FinePix F20 Digital Camera Logo

Related Topics:

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...