Question about Kenmore 80412 Microwave Oven

1 Answer

Kenmore model 721.6365330

Trying to put glass back into the door.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Have issue no power all the way fuse not burnout still got no power.

Posted on Dec 07, 2013

2 Suggested Answers

blueextc3221
  • 15935 Answers

SOURCE: F9 err cd on Mod 721-80869400 be caused by metal tray in micro?

The F9 error code indicates a failed inverter. If resetting the unit does not help you will need to have the inverter & harness checked.


http://media.fotki.com/1_p,wbgdfgsrsttwqwbxgtqsskgwtqkq,vi/kgdfkfrkkxkfdtftrfb/1/1303472/5961857/image45625img-or.jpg

This can sometimes by caused by a power surge or glitch through the electrical lines.
You can sometimes clear this fault by completely unplugging the microwave for 1 minute.
Plug it back in and see if the fault code returns.
If it does, then you have an internal component failure that will need to be serviced by a technician.
Microwaves must be serviced by technicians due to the inherent dangers involved in repairing these appliances.
Internal capacitors can retain a lethal electrical charge even though the unit is completely unplugged.
A microwave radiation leakage test must be performed on the unit following any internal component repair.

It does not ALWAYS indicate a inverter control board problem however in other brands/models.
LG's service manual (for an example) suggests the f-9 code could be due to line voltage, magnetron, inverter module, "Relay2", or a loose connection between door/magnetron/control pcb.
Other indications might help narrow down these choices before having to pull out your multimeter and crack open the microwave case.
For example, if the microwave works, but heats slowly, then the troubleshooting manual narrows your choices down to magnetron or line voltage problems, and pretty much rules out the other possibilities.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 23, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace inner door glass in a Maytag CWE900 built-in oven?


There is a poor diagram on Searspartsdirect.com, but no instructions. A diagram might help.

Feb 18, 2015 | Maytag Microwave Ovens

1 Answer

I have a Kenmore Elite Microwave Model 721.7915. When opening the door to put an item in, the microwave automatically starts without closing the door or pressing any functions. I have tried unplugging...


The door latch is a safety interlock that prevents your microwave oven from doing what it is doing. The latch has failed and has to be replaced.

Dec 19, 2014 | Kenmore Microwave Ovens

1 Answer

Door window replacement. can I replace the glass in the door of my microwave.


Good Afternoon Friend,

I understand that you want to replace the glass in the door of your Frigidaire microwave, model# FGMV174KFC. Yes, you can replace any glass in your microwave that you choose. However, for safety reasons, I do suggest contacting your local authorized technician for the replacement of the glass. They are trained on your particular, model and will be able to ensure that the door is put back together and installed correctly, alleviating any safety issues. Hope this is helpful.

-Best Regards-
WP

May 23, 2014 | Frigidaire Microwave Ovens

1 Answer

Need new glass tray for Kenmore microwave bought in 1977. Model # 99371.


They made Microwaves in 1977? wow. I would try an appliance junkyard, or ebay. We have used a microwave safe plate of the right size and it worked well. Good luck!

Apr 29, 2012 | Kenmore Microwave Ovens

1 Answer

Loose handle.


To access the door screws on MOST microwave ovens, you need to remove the inner door panel that goes around the perimeter of the glass. The following link explains:

http://www.fixya.com/support/r3696942-microwave_oven_door_handle_replacement


This can be peroformed with the door in place, or with the door removed. If you have any questions, please post back with your complete model number and let me know. I hope this helps you.

Feb 18, 2010 | Kenmore 62622 Microwave Oven

1 Answer

My over the oven model 665.61629100 kenmore has cracked door


The outer door frame CAN be replaced if you like. You can view an exploded view diagram at searspartsdirect.com. Just type in your model number and locate item 10 under the "Door" parts listing. The part comes in various colors so make sure you select the correct one.

The door can be easily removed by opening it all the way and lifting straight up at the hinges. The door will come off the hinge pins and can be laid on a flat surface for easier access. Place a layer of towels under the door to prevent damage to the door.

You will need to remove the door handle to get the outer door frame off. To access the door handle mounting screws on MOST microwave ovens, you have to remove the inner door panel that goes around the perimeter of the glass. You can use a small screwdriver to carefully pry the plastic up and work your way slowly around the perimiter of the glass. Most microwave ovens also have grooves in the panel that you can insert the screwdriver into. Use care not to pry against the glass. The glass is tempered and also has an RF shield that prevents harmful microwaves from potentially harming the consumer. If you break the glass, you may need to purchase a new door.

The door handle screws are located behind the inner panel. Remove the door handle and and locate any screws that may be securing the outer door (front) frame in place. Once you install the new outer door frame, re-install the door handle and carefully re-insert the inner door panel. Gradually work your way around the perimeter of the door glass and make sure it snaps back into place.

If you have questions about this repair, please let me know. I hope this helps you.

To answer your initial question, the microwave should continue to be safe to use as long as the inner door seal and door glass are intact. Make absolutely sure you reinstall the door components back together properly. Not doing so will render the oven unsafe to use. Refer to the web site I provided as a reference for how the door components go back together.

NOTE: This part is listed a bit cheaper at appliancepartspros.com. Use the part number from the first website I mentioned as your search criteria.

Jul 30, 2009 | Microwave Ovens

2 Answers

How to change the handle


To access the door handle mounting screws, you have to remove the inner door panel that goes around the perimeter of the glass. You can use a small screwdriver to simply pry the plastic up and work your way gradually around the perimiter of the glass. Most microwave ovens have grooves in the panel that you can insert the screwdriver into. Use care not to pry against the glass. The glass is tempered and also has an RF shield that prevents harmful microwaves from potentially harming the consumer. If you break the glass, you will need to purchase a new door.

The door handle screws are located behind the inner panel. Simply remove the broken handle and install the new one. Re-insert the inner door panel carefully and gradually work your way around the perimeter of the door glass and make sure it snaps back into place.

If you have questions, please let me know. I hope you find this information helpful.

May 14, 2009 | Kenmore 62702 Microwave Oven

1 Answer

Our handle broke off our GE Profile Spacemaker Oven


You can easily perform this repair on your own and save the cost of labor charges and a service fee. Go to appliancepartspros.com and type in the model number you provided. The door handle is located under Section 1 as item number 1801. Make sure you order the correct color.

To access the door handle mounting screws, you have to remove the inner door panel that goes around the perimeter of the glass. You can use a small screwdriver to simply pry the plastic up and work your way gradually around the perimiter of the glass. Most microwave ovens have grooves in the panel that you can insert the screwdriver into. Use care not to pry against the glass. The glass is tempered and also has an RF shield that prevents harmful microwaves from potentially harming the consumer. If you break the glass, you will need to purchase a new door.

The door handle screws are located behind the inner panel. Simply remove the broken handle and install the new one. Re-insert the inner door panel carefully and gradually work your way around the perimeter of the door glass and make sure it snaps back into place.

If you have questions, please let me know. I hope you find this information helpful.

May 12, 2009 | GE JVM1490 Convection/Microwave Oven

1 Answer

Door


You should have this done by a professional. The unit will need tested for microwave leaks after the glass is installed. This is a safety issue!

Geno

Mar 04, 2008 | Kenmore 80412 Microwave Oven

Not finding what you are looking for?
Kenmore 80412 Microwave Oven Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9011 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Jim Thurston

Level 3 Expert

670 Answers

Are you a Kenmore Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...