- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Not to worrry , but there is a sliding button, knob that makes the set pause and called as HOLD. All you need to do is to slide the knob back,look at teh side of the door/set. please look carefully even if the pause is pressed twice.
I am sure you will find this out and continue to enjoy music during your treatment. I wish you luck and my prayers for a good treatment. Good day
The unit has a hold button that keeps you from accidentally
activating the device when it's in a purse or backpack, which preserves
battery power and also prevents changing tracks if buttons are accidentally pushed while in play mode. Look on the player for the hold button and turn it to the off position. I hope this helps and good luck!
Triple Reset for Philips’ GoGear: Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off.Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab.Reset the player one more time while connected to computer. Follow the repair instructions. After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again. -Tha Mp3 Doctor
Looking down on the unit from above with "Memorex" reading left to right look at about one oclock. There is a switch marked hold ...turn it off. Its black on black, so its hard to see. It disables the onboard controls. The remote if you have it works either way, but when on hold it will act just as you describe.