Question about GE Monogram ZGU48N4GHSS / ZGU48L4GHSS Stainless Steel Gas Cooktop

2 Answers

Handle is loose on GE Monogram Model# ZFSB27DAG SS. How do I get thehandle tightened up? No steps have been taken to fix problem. Stirwin

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remove the 4 x hex screws (using 5/64 key) located under each handle 1007 post. The 1006 handle comes off (while the posts stay with the door) exposing the Phillips screws tightening the posts to the door. Tighten the Phillips screws and reassemble.

Posted on Feb 17, 2013

  • ken hopkins
    ken hopkins Feb 01, 2015

    thank you, thank you thank you! You are the smartest man on the internet! We even named our fridge "Roland" after you!!!

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • GE Master
  • 2,651 Answers

Handle secured by 4 stainless stand offs on each door correct?, i would look closley at the underneath of the standoffs should be a screw to tighten/loosen. . actually lookin at diagram theses are comlete doorskins wrapped around the door itself you might need to remove teh screws on top and bottom ofr door skins and tighten from behind s/s skin

Posted on Mar 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GE Monogram f160 error code?


When an "F" and a number appear in the display and the cooktop beeps you have a function error code.
Touch the CONTROL LOCK pad.
Disconnect power to the cooktop and then reconnect.
If an F-code appears again, call for service.

May 03, 2014 | GE Monogram ZEU30R Electric Cooktop

1 Answer

No ignition for any of the burners


chek connection panel on bak common fault is loose connector

Nov 19, 2011 | General Electric Monogram® ZGU385NSMSS...

1 Answer

My GE Monogram Gas Cooktop model ZGU650N4DH5SS ignitor keeps sparking even after the stove is lite. What do I need to change or fix please?


Hi Ishiggs,

The ignition switches probably got wet.

Please follow my below Tip on how to fix it:

GAS STOVE CLICKING PROBLEM...

Kind Regards

JEDEMEYER1

* If this solution helped you, please accept it

Sep 11, 2011 | Cooktops

1 Answer

My ge monogram stove top burner( model zgu366h)continues to ignite. even after the flame is lit


If you are saying the clicking continues you must move the burner knob past the LITE position.
If it continues clicking with the knob past the LITE position the ignitor switch behind the knob is bad.

Nov 30, 2010 | GE Cooktops

1 Answer

I have a GE Monogram Gas Stove - 5 burner. All


Hi,
Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range RepairBurners Keep on Clicking
heatman101
w3

Jun 15, 2010 | GE Monogram ZGU48N4GHSS / ZGU48L4GHSS...

1 Answer

Ge monogram cooktop model#zeu30rsf1ss error code f1 74


Hi There
I have found the codes that you need and hope this helps you.
F1 Stuck touch pad Usually means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be cancelled, replace the oven control (also called clock or ERC), touch pad, or both.Thank You for writing to fix ya.
Best Regards Richard

Feb 18, 2010 | GE Monogram ZEU30R Electric Cooktop

1 Answer

GE Monogram ZGU48N6D- None of the Ignitors "click"


We just had that problem - the igniter is electric - if none of the burners are "clicking" it could be a power problem. unplug the stove and check whether the outlet is working. In our case, the outlet the stove is plugged into has a "GFI outlet with a reset button. So we reset the outlet and that fixed the problem.

Apr 08, 2009 | GE Monogram ZGU48N4GHSS / ZGU48L4GHSS...

Not finding what you are looking for?
GE Monogram ZGU48N4GHSS / ZGU48L4GHSS Stainless Steel Gas Cooktop Logo

Related Topics:

489 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Cooktops Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

meztang
meztang

Level 2 Expert

112 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Are you a GE Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...