Question about HP Pavilion F1503 15" LCD Flat Panel Monitor

2 Answers

HP Pavilion F1503 1503 15in Flat. screen blanks out constantly

My HP Pavilion F1503 1503 15in Flat. keep blanking out constantly, I press power button on screen, and it wakes up again, but only to go back blank again. This happens every time, I tried it. It seems to be on a sleep mode constantly. is this matter any good?

Posted by on

  • 4 more comments 
  • Anonymous Mar 28, 2008

    I have the same problem with this monitor.

  • billdude May 07, 2008

    I have the same problem. I have a HP Pavillion a 1040n computer. I dont have a Hp monitor. The monitor goes black. It will only stay on for about 10 seconds. I have tried three monitors that are fine on other machines. I have tried a bran new 500 watt power supply, new video card and drivers, it also does the same thing with the onboard video. Please help this one is driving me nutts. Thanks allot

    Bill Sardini

    bsardini@gmail.com

  • Rita Cooper
    Rita Cooper May 08, 2008

    My HP Pavilion f1503 screen blanks out if I stop working on the computer for more than 2 minutes! It just started doing this the past few days.

  • lbeach Jul 17, 2008

    Same problem - have disconnected, reconnected and changed power source

  • Anonymous Jul 21, 2008

    I have the same problem with my HP pavilion f1503, were you able to fix it?

  • Anonymous May 25, 2009

    yea um

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 220 Answers

THis is a problem of the invertor board.If you are technically able you need to disasseble the monitor and resolder components around the red or yellow inverter transformers.
Samir

Posted on Mar 04, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How would one do that?

Posted on Oct 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Monitor keeps going blank - when im on internet it will suddenly go extra bright for a half second, the blank. if I switch it off using the button on the side and switch it on again, it just goes blank...


loricaney, Do some research first. Go here: http://www.lesliewong.us/blog/2005/05/02/hp-pavilion-f1703-flat-panel-display-blackout-solution/ I just read a comment that some guy wrote. He stated that he aquired 30 Vs17 non-working units from a high school, and that 25 of them had bad (swollen or leaky) filter capacitors. The other 5 had cracked lcd panels. maybe $6 in new capacitors will restore unit for you. Do some reading in my fixya profile and "budmrtn" and "buddymc" fixya profiles. let me know if you want to do a DIY repair after you do research and visit YOUTUBE for video clips of owners doing typical capacitor removal and installation. 12fixlouie

Aug 09, 2010 | HP Vs17 17" LCD Flat Panel Monitor

1 Answer

Hp pavillion f1904. powers up then blanks out


g_w_taylor, Try here first!! http://www.lesliewong.us/blog/2005/05/02/hp-pavilion-f1703-flat-panel-display-blackout-solution/ Its an old blog but just do some reading and see if something fits!! Then come back here and do a reply/comment to this response and rate it on FIXYA for others may see the light. 12fixlouie

Jul 19, 2010 | HP Computers & Internet

1 Answer

My hp pavilion F1703 monitor goes blank about every 30 seconds.


Thsi model has known problem with bad solder joints due to contamination, you need to remove the old solder on the four inductor leads, clean the leads eal well and resolder, see my pictures here: http://s807.photobucket.com/albums/yy352/budm/HP%20F1703/
Al so look to see any one of the capacitors have bulging top, they should be completely flat top.

Jun 06, 2010 | CTX S762A 17" LCD Monitor

1 Answer

HP Pavilion laptop screen has gone black/blank


No it suggests you have a bad screen and it needs replaced

Jun 22, 2009 | HP Pavilion F1503 15" LCD Flat Panel...

1 Answer

Keep getting a blank screen and a pop up say system not fully installed


easy, you just have to install the OS again..
u can reinstall it through booting OS CD, maybe some OS instalation files are missing or corrupted.
or if you have the recovery CD from the hp vendor, just install it

May 30, 2009 | HP Pavilion F1503 15" LCD Flat Panel...

2 Answers

Pavilion f1903 silver goes blank seconds after turning on.


The monitor you have has bad components on the circuit boards inside.
This is a classic problem with all LCD monitors.
I rebuild them on a daily basis so I recognize the symptoms.
I would suggest finding someone who can do component level repair on the circuit boards inside.
I also suggest not trying to repair yourself as there are many breakable components to them as well as components inside that do not like static electricity discharges.

May 17, 2009 | HP Pavilion F1903 19" Flat Panel LCD...

1 Answer

MY HP PAvilion F1903 19 " gone black blank


Problem is generally dry solder joints around the inverter transformer on the inverter PCB.

Feb 16, 2008 | HP Pavilion F1703 17" LCD Monitor

5 Answers

Hp flat screen monitor


It's probably your dc power supply.

Mine would blank just 2-3 seconds after power-on.
I pulled this monitor out of the garbage - someone threw it away. I found any old 12vdc power supply I had laying around (1 from an hp scaner 1250mA, another rated at 600mA) neither could supply the current (amps) required to run the backlights, therefore backlights shutdown, monitor goes blank--monitor stilled powered on, but black.

I tried all of the disassembly, re-solder various solder joints on the LCD Inverter board and removing the heat/magnetic shield from inside the back cover of the monitor. Nothing worked.

I bought a Segate 80gb external hard disk drive that came with a 12vdc power supply, looks like a typical laptop power supply, rated at 3A (3000mA). Plugged it to the monitor, it powered up, and it works flawlessly.


Oct 19, 2007 | HP Pavilion F1703 17" LCD Monitor

Not finding what you are looking for?
HP Pavilion F1503 15" LCD Flat Panel Monitor Logo

819 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...