Question about Televison & Video

2 Answers

Pioneer SD P5183

I have a pioneer sd p5183 tv. After moving it now it will not turn on. You hear a click then it goes back to a red LED (standby). What could be wrong?

Posted by on

  • Anonymous May 24, 2009

    Hello, I have a Pioneer projection tv, model SD-5183-K must know the value of the transistor Q106, it towers and not have the diagram, if someone can help me I am grateful tanks

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 133 Answers

If it was not banged around or dropped then i would have to guess that a capacitor was leaky before you unplugged it and moved it and it now it is to weak to fire back up . You would need a capacitor ESR meter to find the bad one . Good luck

Posted on Mar 03, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Broke glass inside of television how do fix it.

Posted on Aug 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TURN ON MAINS POWER STANDBY LIGHT COMES ON THERE IS A CLICKING NOISE ABOUT FIVE TIMES TV DOES NOT COME ON


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Jan 09, 2017 | Televison & Video

2 Answers

What is wrong with my TV? No picture but has sound. picture shows with flashlight.


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Jan 08, 2017 | Televison & Video

1 Answer

My new AOC 27"LED has a vertical white line moving back and forth on the screen. as it moves left, contrast is reduced and as it moves right, contrast is restored


The TCON board or the LCD panel is faulty. Can confirm by replacing the TCON board.

If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Jan 08, 2017 | AOC Televison & Video

1 Answer

I have a lg tv 60 inch tv ln5600 when powering on red stand by light blinks 3 time then no light pic or sound not backlight and no image when using flashlight treid replacing power board does same


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 08, 2017 | LG Televison & Video

1 Answer

I have pioneer plasma tv about 6 years old. I turned the power on, sound but no picture. Do you think it is worth fixing?


no
plasma tv units consume considerable power and the latest led units don't so for the extra cost of a new unit , there will be a power saving over the years

Jan 08, 2017 | Pioneer Televison & Video

1 Answer

MY SAMSUNG TV IS ONLY SHOWING A BLACK SCREEN WHEN IT POWERS ON THE MODEL NUBER IS UN60EH6002FXZA WHAT DO U THINK IS WRONG WITH IT


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board

Jan 07, 2017 | Samsung Televison & Video

1 Answer

Help me guys regarding my home tieter pioneer model xv-dv 272 .my problem is When I open my player the display is only oc error1 I don't know what kind of error code is this help me guys pls reply


Unplug the power then hold the power button down and plug the unit in again to reset it. If not this is probably a component fault.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 03, 2017 | Pioneer Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71126 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

66563 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...