Question about Lexmark Z617 InkJet Photo Printer

1 Answer

Auto turn off

Ive had my printer for a few years.Weve just recently had an upgrade on our computer and printer doesnt automatically turn off now when the computer shuts down, which it did before. any suggestions?

Posted by on

1 Answer

Bncvnbnb

Posted on Aug 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer wont print. I have recently upgraded to windows 7. have downloaded the new driver. but it wont print. i have tried a full reset, partial reset, taking out ink and restarting, putting ink back...


You need to check the hardware functionality of printer first. Make a copy from printer and check if it prints fine. If hardware is okay. You can try following steps on computer.

1- On computer keyboard press Windows(flag) button and R at the same time
2- This will open a small Run window
3- Type devmgmt.msc in Run window and click OK
4- This will open Device Manager window.
5- Right click on psc 2410(2400) entry under "universal serial bus controller" and 'imaging device' and click delete/uninstall/remove. Printer's entry should disappear from there.
6- Disconnect usb cable from printer and computer
7- Wait for 50 seconds.
8- Connect the usb cable to printer and computer.
9- This should install the drivers automatically.

Dec 23, 2010 | HP PSC 2410 All-In-One InkJet Printer

1 Answer

Printer doesnt show up on computer


uninstall all drivers for printer. go to printers make website. download correct driver for model, it's free. check all cables. connect and disconnect.

Dec 22, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

3 Answers

Lexmark X3550 ink cartridge #23 receiving error message "left cartridge incorrect" when trying to replace. Using Lexmark Cartridges only for over 1 year, now cartridge won't work.


There are a small number of #23/#24 cartridges that are not properly recognized by the printer. Lexmark has a firmware upgrade to correct this issue. The upgrade for the X3430 is available from Lexmark at:

To install the firmware upgrade,
  1. Make sure the printer is ON and connected with a USB cable.
  2. Download and run the appropriate firmware upgrade for your computer.
  3. Be sure not to disconnect or power off the printer until the upgrade is complete

When the update finishes the printer will restart and will accept the cartridges. Please contact Lexmark support if this does not fix the problem.
A similar patch is available for the X3430 and Z1420 models. See http://bit.ly/LoXxv

Jun 19, 2009 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

Fax doesnt work


Go to control panel and open the printer. For faxing, make sure you have selected "Series FAX" and not the actual Printer.

This might be the problem

Jan 09, 2009 | Canon PIXMA MX310 All-In-One Printer

1 Answer

No longer able to print


Look and see how many pages it's printed out if possible, You may need a maintenance kit with fuser. Also the age of the computer affects parts.

Jun 10, 2008 | Kyocera FS-920 Laser Printer

1 Answer

ERROR CODE 6C00


The printer has a Reset mode- somewhere. But different makers/models have different settings. Try the manual and if not mentioned there try the Canon website. Failing that try this- with the printer switched off press a combination of 2 buttons[any 2] with them pressed switch the printer on did it reset?- then try another combination. take a look also at www.fixyourownprinter.com also here http://www.fixya.com/support/p360551-canon_pixma_mp780_all_in_one_inkjet

May 14, 2007 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

Installation


Could be your USB drivers for the actual port itself is giving you troubles. What you can do is this. Unplug the printer! Go to Device Manager(Right-click on my computer then click Properties, click on Hardware Tab then press Device manager Button) Look under Universal Serial Bus Controller. Is there a device with a yellow exclamation? if there is, right click on it and uninstall. Go to the top of the list the right click on your computer name and click on Scan for hardware changes! If it finds new hardware and prompts for drivers,(If asks to check online, select no, not at this time) select Install from specific location, then click next, Select the top one(Search these specific locations, and uncheck everything else)!! Next. It should go all the way through, if you get a propmt about unsigned driver click continue anyway! If it goes through try connecting your printer if not it will end in with an error, get back to me with the exact error!! Also your pc might require chipset drivers!! Get back to me with your computer specs if the above doesn't help! regards, babb

May 07, 2007 | Lexmark X75 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark Z617 InkJet Photo Printer Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...