Question about Sanyo DS20930 20" TV

1 Answer

Add a station

I am trying to add station 73 to the SANYO TV set and the set will not allow it.  The stations only go to 68.
Can you tell me how to do that?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 133 Answers

If you are on outdoor antenna or rabbitt ears this cannot be done as most tunersonly go to channel 69 . If your are on cable this can be achived by going into the menu and first making sure the tv is in the cable mode . Your set should have a section for manuelly adding or deleting or channels , simply by pushing 73 with your remote then using the onscreen menu to add this channel . Or you can just autoprogram your channels over again and this should pickup your channel . If this does not work what is the model # of your set so i can lookup the manuel if it is available. Also you can try to google the model # of your set with the phase (owners manuel) to see if you can find a free download of your set .This will also have the info your looking for . Good luck

Posted on Mar 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I do a channel scan?


Press Menu on the TV (second button from the left) or the remote. Use the Vol + / Vol - buttons to highlight Tuner, only available when the input is the TV (press TV/AV to get to the correct source) mode. Press Ch+/Ch- to highlight AutoProgram and then Vol+ to start the search for channels. The TV will show Tuning Finished when done and then go to the lowest channel found. If you want to add or remove stations, tune to the desired channel, then press Menu, and highlight Tuner, Ch+/Ch- to highlight Add/Erase, then Vol+/Vol- to set Add or Erase. Press TV/AV/Exit to get out of the menu.

I hope this helps.

Cindy Wells

Jul 28, 2010 | Philips Magnavox 27MS343S 27" TV

4 Answers

Add a station


This set isn't capable of going over 68, this is all it's programmed for. You will need to get a channel box that overrides the tv's programming in order to add the channel 73.

Aug 27, 2008 | Sanyo DS20930 20" TV

3 Answers

Sanyo ds31520 tv


Have you tried turning it on from the remote instead?

Jul 23, 2008 | Sanyo DS31520 31" TV

1 Answer

Need to have tv on chan. 73, for dish access


When I had Dish hooked up I had to use chanel 3 on my television or the video inputs. The Dish box will take care of all the stations that yor receive. You shouldn't have to change chanels with your tv.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

May 04, 2009 | GE 19GT317 19" TV

1 Answer

There are no problem with the TV set,we bought the set second hand and didn't receive the manual,we were wondering how we could programe the set to give only 5 stations shown on the set, not the blank...


Do you have the remote ? What model is the TV ? Usually you can use the remote to add/delete stations. There should be an add/delete button(s) on the remote.

Apr 17, 2009 | Sony Televison & Video

1 Answer

How do you retune stations on Sanyo tv's using your remote. Some of the channels have changed to a different location and I can't find my instructions. PLEASE help me.


If you can access the main menu, you want to go into add/remove channels.

With any luck there will be instructions on the screen.

Apr 15, 2009 | Televison & Video

1 Answer

I have an RCA converter box hooked up to an RCA TV and a Sanyo VCR. The TV and VCR are set on Channel 3. The converter box is set on Channel 4 and the TV is also switched to CH 4 when viewing digital...


Basically, you cannot use the coax connections for both the VCR and the RCA converter box. I would hook up the phono/cinch connectors from the VCR to the TV if you can (these are also called RCA connectors, but I'm avoiding using that name so we dont confuse the digital receiver with a cable/connector name that is the same here). There should be a yellow one for video and red/white ones for left and right stereo. I believe the RCA converter comes with a three headed cable that can do this for you. With this configuration, you can set the TV to input on these connectors and the VCR should always output there. Once that is set, you can still use the converter box to receive the signal from your antenna, then run the coax to the VCR. Now, the VCR will always have to be set on channel 4 in your setup and you will need to manually change channels on the converter box for it to record a show. Does this make sense so far?

Feb 27, 2009 | RCA Televison & Video

1 Answer

Sanyo ds 31350 tv


Hi there!

Assuming that you tried to tune stations onto the UHF bandwidth and received nothing,Commonly the tuner box is probably at fault and needs replacement. The VHF and UHF signals are split inside the tuner so if you receive VHF fine then UHF should as well unless faulty of course. Some circuits require an external IC to do the switching, but more on the older models. Regards and good luck, JUS004

Apr 02, 2008 | Televison & Video

1 Answer

Play Station 3


Please tell me what cables you are having...? audio/video cable...?

Mar 27, 2008 | Sanyo DS20930 20" TV

1 Answer

No signal from My Antena


sounds like the tuner has went bad, have you tried to hook it up with audio- vidio jacks or through your vcr??

Sep 03, 2006 | Sanyo AVM-2751S 27" TV

Not finding what you are looking for?
Sanyo DS20930 20" TV Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69570 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...