Question about JVC KD-G200 CD Player

1 Answer

JVC KD-G200 cd player

Hello, I have the above mentioned jvc cd player. The problem I am having is that the unit will not power on. It will display the clock, it will accept/load a cd and it will eject a cd and during those times it will say Load or Eject on the screen, but other than this it does nothing. I have looked over all the wiring and I don't see anything loose. Any suggestions? Is it just fried or what?

Posted by on

  • adamlowe_09 Aug 14, 2008

    will not power on. checked the red wire and its good. checked all the wires and they are good. clock will display and will take a cd in and will eject. is there another wire i could use to make it power on



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 323 Answers

I would suggest checking the accessory (red wire), the yellow is a constant feed from the battery, which will allow the clock to be displayed no matter what. The accessory wire is what is used to turn on the cd player. You may need to restrip the red wire and check the lead going to the red wire with a test light to make sure it is getting a voltage light.

Posted on Apr 20, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why sound but no picture

It is an audio player only.
It supports CD/CDRW audio formats only.
What picture do you expect ? JVC KD G200 Instruction Manual Maintenance Handling Discs

Apr 09, 2016 | JVC KD-G200 CD Player

2 Answers

I have a JVC KD-R80-BT it is one week old and when it s cold outside the clock stop working

I had the same issue. I found that this is normal system function for one of the three clock displays. This will only affect the large clock display. When the unit is too hot or too cold, a symbol LT will appear on the screen in the upper right corner. When LT disappears, the unit temperature is at a satisfactory level and the clock will function normally. In the manual, it says that displays is frozen until the unit heats up or cools down because scrolling would be fuzzy.

Jan 27, 2013 | JVC KD-R80BT AM/FM CD/MP3 Car Stereo...

1 Answer

How do I turn my jvc kd-g200 to aux mode?

Thi JVC KD-G200 does not have an auxiliary input, or aux mode. If you want to play audio from an external device through this unit, you will need a FM transceiver.

Mar 03, 2011 | JVC KD-G200 CD Player

1 Answer

I have a jvc kd-s590 in my car & have no idea how to set the clock. It'd driving me crazy. Please help!

1 Press and hold SEL (Select) for more than 2 seconds. "CLOCK H", "CLOCK M", "SCM LINK" or "LEVEL" appears on the display. 2 Set the hour. 1 Select "CLOCK H" if not shown on the display. 2 Adjust the hour. 3 Set the minute. 1 Select "CLOCK M." 2 Adjust the minute. 4 Press SEL (select) to finish the setting. 1 2 During tuner operation: During CD operation: Frequency Clock To check the current clock time (changing the display mode) Press DISP repeatedly. Each time you press the button, the display mode changes as follows. To Cancel Advanced SCM You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources. When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources. LINK ON: Advanced SCM (different SCM for different sources) LINK OFF: Conventional SCM (one SCM for all sources) 1 Press and hold SEL for more than 2 seconds. "CLOCK H", "CLOCK M", "SCM LINK" or "LEVEL" appears on the display. 2 Select "SCM LINK" if not shown on the display. 3 Select the desire mode - "LINK ON" or "LINK OFF". 4 Press SEL (select) to finish the setting. • If the unit is not in use when you press DISP, the power turns on, the clock time is shown for 5 seconds, then the power turns off. 1 2

Nov 03, 2010 | JVC KD-S590 CD Player

1 Answer

How do I set the clock on my JVC KD-SX950 CD player ?

Hold down the volume button (while the unit is powered off) and it should pull up a psm menu. Clock settings will be in there. Hope this helps...

Sep 28, 2010 | JVC KD-SX950 CD Player

1 Answer

I have a JVC KD-G200 car stereo CD sometimes doesn't want to play and CD does not eject this after I had my water pump replaced in my car, what can I do?

if the jvc powers up, it has nothing to do with the water pump, its just pure coincidence. when it comes to jvc you pay for what you get, if its with in a return policy take it back and buy something better, alpine, kenwood ect

Sep 11, 2010 | JVC KD-G200 CD Player

1 Answer

How do I set the clock?

Hi there,
I found this on Page 22 of the JVC KW-XC777 Manual

1. Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display. (See
page 23.)

2. If “CLOCK HOUR” does not appear
press >>| or |<<
until it appears.

3. Adjust the hour.

4. Press >>| or |<< until “CLOCK
MIN (minute)” appears on the display.

5. Adjust the minute.

6. Finish the setting.

To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for 5
seconds, then the power turns off.

I hope that helps.

May 25, 2010 | JVC KW-XC777 CD / Cassette Player

1 Answer

How to set the time on my jvc 6210

Hello! Press and hold Select (SEL) for more than two seconds...Clock hour and Clock minutes appears on the display...SEL hour...up/down adjust hour...SEL minutes
up/dn adjust minutes...Finish by pressing SEL...


I’m happy to help further over the phone at

Mar 30, 2010 | JVC KD-G210 CD Player

1 Answer

Mine lookss like the above...just want to set the

some units have a display button, if you have one of these press it until the clock appears, if not you will have a menu button which you will have to push and then press the up or down buttons.


Not finding what you are looking for?
JVC KD-G200 CD Player Logo

Related Topics:

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4981 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides