Question about AEG Dishwashers

1 Answer

AEG OKO-FAVORIT 50800

The machin gave C3 fault signal. Corrected the flood switch. Wont reset stay on C3 error message. What is he problem

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

C3 error means that there is water at the bottom of the dishwasher. Unplug the dishwasher, slide it forwards and push it back. So it stands on the 2 back knobs. Do this atleast at a anle of 45 degrees. You will see water flowing at the floor.
If this happens often you have a leak somewhere. Time to cal the technician then.

Posted on Sep 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a oko favorit 4071 doesnt start and display H8 error.


I think this is not the error code. I belive this is hardness of water (could be set from 0 or 1 to 10, depending of model. Read your user manual how to exit the program for adjust the water hardness).

Error code for your appliance depending on model and look like:
i10, i20,i30............ or
C1, C2,C3.............

Dado

Jul 06, 2015 | AEG Dishwashers

1 Answer

Aeg oko favorit 40300 service manual


AEG OKO FAVORIT 40300 When switching dishwasher on no water is flowing into the the dishwasher

Please help

Jan 11, 2012 | AEG Dishwashers

1 Answer

Aeg sensorlogic 50700 first showed c2 message; we drained & cleaned filters 3 times; worked half cycle and now showing error message c3?


Error message C3 is most likely indicating the flood switch is triggered. This means water is leaking from under the sump. The C2 error is linked to drain problems which you cleared.

Dec 29, 2010 | AEG Dishwashers

1 Answer

How can I reset an i30 (flood control) error?


you have to mopp up any water in the base of the machine. this can be caused by a leak . a sagging pressure pipe to the pressure switch can do it as well. you can tie it up to stop the sag. its at the front behind the plinth area.

Jul 22, 2010 | AEG 24 in. Favorit 60830 Free-standing...

1 Answer

Got an AL4 error on my AEG 64800


al4 is tripping of anti flood float switch in base of machine. look for a leak mopping out the base resets the switch

Jun 19, 2010 | AEG 18 in. Favorit 64800 Free-standing...

1 Answer

AEG OKO FAVORIT 6050 trips earth leakge


This is typical of a water leak onto electrical connection OR the electrical element has shorted internaly . Check this with a Ohm meter and itshould show the problem

Dec 20, 2009 | AEG 24 in. Favorit 60830 Free-standing...

3 Answers

The drain pump on the AEG oko favorit 6050 keeps running even when the on/off switch is off or the door is open.


Empty all the water from the salt resevoir, (I used a turkey baster), then rock the machine backwards and forwards a few times and empty the last few drops from the resevoir again.

Oct 17, 2009 | AEG Favorit 50500 Built-in Dishwasher

1 Answer

Aeg dischwaher model oko favorite


This seems like the anti flood system (polystireen float / micro switch) at the base of the washer is triggered,\. This puts the washer in pump out mode and stops inlet of water via the inlet solinoid. Dry the water on the base and then check for any water leaks. (pipe leak

Nov 15, 2008 | AEG 18 in. Favorit 64800 Free-standing...

3 Answers

Drain pump keeps running AEG oko favorit


This seems like the anti flood system (polystireen float / micro switch) at the base of the washer is triggered,\. This puts the washer in pump out mode and stops inlet of water via the inlet solinoid. Dry the water on the base and then check for any water leaks. (pipe leak

Aug 29, 2008 | AEG Favorit 50500 Built-in Dishwasher

1 Answer

AEG Dishwasher FAVORIT 3A Error Message C3


If you open a sidepanel and look at the bottom of the machine you see a brown device with a piece of white foam,this is the leak prevention system.
Push foam down and the error code should be cleared.
Make sure you there's no water left on the bottom of machine

Oct 24, 2007 | AEG Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

2,216 people viewed this question

Ask a Question

Usually answered in minutes!

Top AEG Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

paul
paul

Level 3 Expert

750 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you an AEG Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...