Question about Compaq CV 7500 17" CRT Monitor

1 Answer

Monitor Problem In my moniter picture is shivering continuously up to low. Please tell me any solution in my Email address workofcopy@gmail.com

Posted by on

  • deepak dewan Mar 04, 2008





    Respected Sir/Madam,

    My english is not so good but i want to thanks for your tips (Solution). My problem is solve. Again I want to thanks.



    Deepak Dewan

    workofcopy@gmail.com



  • Anonymous Mar 20, 2014

    can't switch my outlook email account to my main account: dianekisssinger9@gmail.com

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 138 Answers

It might be because of magnetic field from speaker. Firstly make sure you didn't put any speaker close to this monitor. Secondly, try to reset the screen to the default from factory. Thirdly, try this monitor with another computer and make sure that the problem is not from CPU.

Posted on Mar 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Medion monitor model 30159


Hi,
If you can sent me a mail to my email address then i will forward you the user manual of your monitor. Its not possible to upload the manual through fixya. there are no such facilities available.
My email address is ajingopakumar@gmail.com

Aug 19, 2012 | Computer Monitors

1 Answer

Crt screen shivering with some noise inside


From the description the high voltage inside the set is arcing that would explain the shivering in the picture and the noise you are hearing, the monitor is on the verge of failure and should not be left unattended while it is running.

Apr 02, 2012 | Computer Monitors

1 Answer

My monitor is shivering due to magnetic field tell me solution


Solution for many "jittery" or "shaky" or "shivering" monitor problems...

Be sure there are no power AC cords in direct contact with or very close to the monitor cable anywhere along its entire length. If no help, be sure the monitor and monitor cable are not very close to a wall that may have an AC power lines running in it. Also, be sure that you are using a "grounded" (3 prong) power cord, that is is not plugged into a "2 prong" adapter that eliminates the ground ("earth") prong, and be sure that your power circuit that you are plugged in to is properly grounded.

Dec 08, 2010 | Gateway HD2201 22" LCD Monitor

1 Answer

Moniter doesn't stay on


Hello,

It sounds like you have a monitor with a common problem. After a few years some LCD monitors will blow a power supply. The problem is caused by parts called capacitors overheating in the confined space of the monitor. If you are good at electronics repair/soldering you can usually fix the problem. Check out a few pictures on my web site www.ccl-la.com/badcaps.htm You can take the back cover off your monitor and look for the bad parts,replace any that look like the pictures and your monitor should work fine. The capacitors do need to be installed with the correct + and - connections, note the stripe on the old one and insert the new one the same way. If you have additional questions just email me. If you can't do the repair we offer a repair service, contact us for more details.

I hope this helps, if so please rate my solution.

Buddy
Corporate Computer
www.ccl-la.com
Over 21 years of computer and printer support/repair

Aug 10, 2009 | Samsung SyncMaster 225UW 22 inch LCD...

2 Answers

Moniter Display Problem.


Either cable contacts inside your monitor is not proper or the data cable is faulty. Monitor repair is required.

Dec 13, 2008 | LG Studioworks 563N 15" CRT Monitor

2 Answers

Green light continously blinking in samsung sync master 753s


1. cpu problem. why because of there is no signal output from cpu to monitor. the led blinking means there is no vertical, horizontal signals from cpu to monitor.

2. your monitor connected to another system.

3. neck board dry points.

4. cheak the display cable. 13&14 pins are horizontal, vertical signals.1, 2, 3 pins , R G B , 6 ,7, 8 pins R G B ground ( coaxiler cable used , meshed wire is ground )

Oct 13, 2008 | Samsung SyncMaster 753S 17" CRT Monitor

1 Answer

Monitor repair


look in your local paper for monitor repairer,
but as the cost of a new monitors has come down so much ,i would consider a new purchase as the refresh rates and picture quality are far better now than when your monitor was produced,also second hand prices are very low .

good luck
Terry

Mar 10, 2008 | HP Pavilion F1703 17" LCD Monitor

Not finding what you are looking for?
Compaq CV 7500 17" CRT Monitor Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computer Monitors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

William Miller
William Miller

Level 3 Expert

8820 Answers

Ricky Ostrom
Ricky Ostrom

Level 2 Expert

270 Answers

Are you a Compaq Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...