- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. From a Home screen, touch Apps
2. On the Bluetooth tab, touch the OFF / ON icon
to turn Bluetooth on.
3. Enable the target device's discoverable or visible
4. Touch the Bluetooth tab and then touch Scan. Touch
Stop at any time to stop scanning.
5. From the list of found devices, touch the target device,
then follow the prompts to complete the pairing:
• If the target device requires a PIN, enter a PIN for the target
device and touch OK. When prompted, enter the PIN on the
• If the device allows automatic or smart pairing, your device
attempts to pair with the device automatically. Follow the
prompts on your device and the target device to complete the
Resynchronizing the keyboard and/or
mouse causes the devices to reconnect to the receiver using new
identification numbers. Use the following steps to resync the devices:
The following connection sequence must be completed within 60 seconds. If the sequence is not done in 60 seconds, start over.
With the receiver plugged in, press and hold the
button on the receiver until the activity LED flashes.
HP computers have receivers built into the front of the computer; such
as TouchSmart 700 Series PCs and Digital Entertainment Centers. Look
for a small connect button built into the case. If you have a
TouchSmart 500 or 800 Series PC, the receiver plugs into a USB port on
the underside of the case and does not have a connect button - skip
Figure 4: An example of a receiver1 - Connect button and LED activity lightFigure 5: Another example of a receiver1 - Connect button2 - Num Lock LED3 - Alpha Lock LED4 - Scroll Lock LED5 - Activity LED
and hold the recessed connect button on the underside of the keyboard
until the activity light on the receiver stops flashing. When you
release the button, make sure it does not stick in the depressed
problems persist after resetting AND there is another wireless keyboard
or mouse near, use these steps again, holding down the keyboard or
mouse button for ten seconds. Doing so may give the keyboard or mouse a
new ID number in case the other keyboard or mouse was using the same
button on the receiver again until the activity light flashes.
and hold the recessed button on the underside of the mouse until the
activity light on the receiver stops flashing. Make sure the connect
button does not stick in the depressed position.
If your mouse and keyboard have a USB receiver,
unplug the USB receiver, wait 10 seconds, and then insert into another USB port
- preferably into a USB port that is closer to the mouse and keyboard.
For example, if the USB receiver was plugged into a USB port on the
back of the computer, unplug it and plug it into a front USB port.
try switching the right click to another button using setpoint. if the button works perfect then it is the micro switch for the right click contact logitech. if it drops turn off setpoint and try the regular right click if that drops just may be a glitch in the game. check for mouse controls in the game to tune the mouse.
It's an older game.
Right click game icon and go to properties.
Select tab compatibility.
Select " run in compatibility mode" and select an older windows version.
Now restart the game.
Hopefully this works.