Question about Philips Magnavox 27MS343S 27" TV

2 Answers

Philips magnavox won't turn off and stay in demontration mode

Philips magnavox 13G602-00AA
won't turn off and stay in demonstration mode
semirengeee@yahoo.com

Posted by on

  • Ruka Mar 24, 2008

    I have try how you said but the problem still the same.

  • mabeypatrici Jun 22, 2008

    My t.v. turned to demonstation mode by itself. And now now of the buttons work. I need my tv back. Unsure what to do.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hold both volume buttons at the same time for 6-10 seconds and that will reverse it. This has been proven to work!!!! YEAH

Posted on Jun 22, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Expert
  • 46 Answers

You need to reset the set but you must be sure that you make this first...disconnect the ac-cord and secure that the power switch is in the on position...wait a while abt 3 mins and then connect ac-cord ....do not use remote..turn tv on sensetivily by power switch..just a millimeter...in..if the set automatically turns on then you must do the opposit i,e disconnect ac...then power switch in off position and wait...then connect ac cord and push power switch full in....then try to make power off via remote.....good luck...Ron

Posted on Mar 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't find install code for philips magnavox smart series plus


Universal remote codes for Philips Magnavox TV are: 0062 0204 0207 0183 0226 0288
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Sep 27, 2012 | Philips Smart Plus TP3285C 32" TV

1 Answer

Need the universal remote code for the phillips dfr 1600


Hello
Three digit codes for Philips are

PHILIPS Codes: 003/ 004/ 006/ 008/ 062/ 068/ 069/ 074/ 075/ 076/ 086/ 087/ 089/ 133/ 163/ 183/ 184/ 205/ 206/ 207/ 208/ 212/ 213

philips magnavox are:

PHILIPS/MAGNAVOX Codes: 183/ 184/ 208/ 213


Four digit codes for philips are:
PHILIPS ........... 0062 0204 0184 0208 0205 0206 0207 0004 0189 0183 0199 0200 0288 0456 0003 0008 0068 0075 0086 0087 0141
philips magnavox are:
PHILIPS-MAGNAVOX ..... 0062 0204 0207 0183 0226 0288
Direct Code Entry

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
OK.

May 02, 2011 | Audio Players & Recorders

1 Answer

No remote have universal remote what are codes for magnavox sdtv


Hello
You haven't specified details about your Magnavox. There is Philips Magnavox and Magnavox. Anyway I'll give you codes for both Philips magnavox and Magnavox.

MAGNAVOX CODES
Three digit universal remote codes are
004/ 008/ 009/ 062/ 068/ 069/ 074/ 075/ 076/ 077/ 089/ 133/ 163/ 165
Four digit universal remote codes are
0062 0004 0009 0456 0183 0226 0288 0008 0068 0075 0141

PHILIPS MAGNAVOX
Three digit codes are
183/ 184/ 208/ 213
Four digit codes are
0062 0204 0207 0183 0226 0288
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.


Mar 03, 2011 | Televison & Video

1 Answer

Whenever i turn off the mains, i get a


that is normal when you unplug from wall it looses all settings and the reciver thinks it is a brand new reciver and it plays the demonstration

the only way to stop this is not turn it off from the wall

switch it off from the front

May 09, 2010 | Sony STR-DE445 Receiver

1 Answer

Whenever i turn off the mains, i get a Demontration message after power on.


From the manual:

Demonstration Mode
The demonstration will activate the first time you turn on
the power. When the demonstration starts, the following
message appears in the display:
“NOW DEMONSTRATION MODE IF YOU FINISH
DEMONSTRATION PLEASE PRESS POWER KEY
WHILE THIS MESSAGE APPEARS IN THE
DISPLAY THANK YOU”
To cancel the demonstration
Press ?/1 to turn the receiver off while the above message
is being displayed. The next time you turn the receiver on,
the demonstration will not appear.
To view the demonstration
Hold down SET UP and press ?/1 to turn on the power.
Notes
• Running the demonstration will clear the receiver’s
memory. For details on what will be cleared, see
“Clearing the receiver's memory” on page 15.
• There will be no sound when the demonstration mode is
activated.

and...

Note: If the AC power cord is disconnected for about two weeks, the receiver’s entire memory will be cleared and the demonstration will start.

Mar 17, 2010 | Sony STR-DE445 Receiver

1 Answer

Magnavox MODEL # HD1905 C121 CHASSIS # 19E604-00AA SERIAL # 43468127 My Magnavox is stuck in a demo mode. I cannot turn the power on or off, and NONE of the buttons work, nor does the...


on the set press and hold the up and down volume buttons together till the tv turns off then press power to turn back on and everything should be fine

Jun 10, 2009 | Philips Magnavox 20MS3442 20" TV

4 Answers

Magnavox 27


THANKS FOR THE INFORMATION ThaMp3DOCTOR. PRESSING THE VOLUME+and CHANNEL+ SIMULTANEOUSLY FOR 5 SECONDS WORKED!   THANKS

Mar 15, 2008 | Philips Magnavox 27MS343S 27" TV

1 Answer

Philips magnavox fw-c1 3cd, 2 cassette, am/fm stereo


To stop the demonstration mode
• Press and hold stop (on the system
only)
for five seconds when the
system is in demonstration mode.
ª The demonstration will stop.
ª "DEMO OFF" is displayed.
ª The system will switch to standby
mode.

Feb 27, 2007 | Philips FWC1 CD Shelf System

1 Answer

Demo


To stop the demonstration mode
• Press and hold stop (on the system
only)
for five seconds when the
system is in demonstration mode.
ª The demonstration will stop.
ª "DEMO OFF" is displayed.
ª The system will switch to standby
mode.

Feb 26, 2007 | Philips FWC1 CD Shelf System

Not finding what you are looking for?
Philips Magnavox 27MS343S 27" TV Logo

1,096 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...