Question about IBM eserver xSeries 360 8686

1 Answer

Need assistance my pc is old with IBM 8686 and its operating system is windows 95. So it cann't start the windows normally. It is only possible in safe mode. How can i solve this problem or change the operating system. and also i can't be able to boot from CD-ROM. So, please tell me the solution. thank you

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

With Windows 95, you can reinstall th operating system without affecting your data or programs. If you have your original install cd, use this to reinstall the operating system


Aido

Posted on Mar 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Install Windows 2012 on IBM xSeries 346 server


check from the manufacturer which operating systems are compatible with your server

Mar 31, 2014 | IBM xSeries 346 Server

1 Answer

NMI ISSUED PRESS ESC TO TURN OFF NMI IN IBM SERVER


dear mugkifa ,

NMI ISSUED PRESS ESC TO TURN OFF NMI IN IBM SERVER

the above error indicates , a non maskable interrupt occurred in your server , there may be a change of malfunction of a hardware ,like add on cards

one more solution in ibm server is disablig the NMI interrupt by using jumper settings (inside motherboard)


see the below mentioned details , may differ with your server series please refer with series on http://www-947.ibm.com/support/entry/portal/docdisplay?brandind=5000008&lndocid=MIGR-5069937

System-board jumpers
The following illustration shows the switches and jumpers on the system board:
migr-5069937_2.gif Note: Any jumper blocks on the system board that are not shown in the illustration are reserved. The following table describes the function of each jumper block:
Jumper Settings CMOS jumper (JP3) Pins 1 and 2: Keep CMOS data (default)
Pins 2 and 3: Clear the CMOS data, which clears the power-on password and administrator password Boot block jumper (JP4) Pins 1 and 2: Normal (default)
Pins 2 and 3: Recover boot block NMI (non-maskable interrupt) switch (SW1) Normal (default): No NMI issued
The NMI button that is on the rear of server, connected to this switch, has been pressed: NMI issued

May 07, 2010 | IBM eserver xSeries 360 8686

1 Answer

Ibm server xseries 326


It is not detecting the HDD because the windows install does not have the necessary drivers. On the windwos install you must press F6 or F2 I don't remember which one but it prompts you for them to load external drivers fro SCSI or other type of drives, you must download the right drivers for the type of HDD the server has probably fromt eh IBM support website, put them in a floppy and load them from the floppy into the windows install so it recognizes the drives..

Jun 02, 2009 | IBM eserver xSeries 360 8686

1 Answer

How do i get a IBM Xseries server to recognize a serverraid card


IBM Serverguide will most likely get you going again. Go this link:
http://www-947.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=SERV-GUIDE&brandind=5000008. You can download the ISO image for the version of Serverguide that will let you configure your system. If you have a Xseries 360 version 7.2.03 should work.

I hope this helps. Good luck!

-jodair

Apr 03, 2009 | IBM eserver xSeries 360 8686

1 Answer

Ibm server eseries255 error 289


If users try to send more than the maximum allowed data, Domino returns an error

read this red books reference, i hope this might help you.

http://www.redbooks.ibm.com/redbooks/pdfs/sg246495.pdf

http://www.redbooks.ibm.com/redpapers/pdfs/redp3851.pdf

Mar 23, 2009 | IBM eserver xSeries 360 8686

2 Answers

Battery holder replacement


Try to go to BIOS and clear System Event Log. It might help

Regards,

Nov 22, 2007 | IBM eserver xSeries 360 8686

1 Answer

Could not Copy Autoexec.bat


hi okey u have not mention which os ur installing pls go through this link it will help u much http://www-304.ibm.com/jct01004c/systems/support/supportsite.wss/supportresources?topicind=103&catselectind=0&brandind=5000008&familyind=5093441&typeind=5093452&osind=5118054&taskind=1 thanks

Aug 16, 2007 | IBM eserver xSeries 360 8686

Not finding what you are looking for?
IBM eserver xSeries 360 8686 Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top IBM Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...