I have a Janome MC 9500, recently I put new designs in the memory card, but the machine does not read the card, and say a message like "insert pc card update" and suddenly the touch screen turn off. I can't make the machine read the memory card.
HI Have you contacted either the dealer you bought the machine from or Janome directly? There is a Janome group on the internet at Yahoogroups...maybe someone there would have the answer? I've been told that the owner of Janome monitors the group--that is WOW for an international company to pay attention to the customers! Good luck,pat
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Aug 21, 2010 - The designs will then be recognized by your embroidery machine, and you will spend more .... you can use either jef or jef+ for your 11000se .... like to know what brand,size and card reader to purchase for my Janome MC 9500. ...... Bernina · Elna · Embroidery · General · Janome · Necchi · Quilting · Sewing ...
Janome MC9500 5.5x7.8" Embroidery .jef Format Replaces Memory Craft MC9000 ... to creative quilting and clothing construction, your sewing projects will go ... designcards) or Compact Flash Memory Cards (as used in digital cameras). ... My set screen controls for contrast, In./Cm. designation, and other customization
# Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com # 2 Open up 'My Computer'. You should see it under the list of available drives. # 3 Check its contents first to make sure that you have the right drive. # 4 In 'My Computer', right-click on the drive and choose 'Format'. # 5 Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place. # 6 Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.
The solution was sooo easy.....one of my online embroidery groups suggested to put the card in my Janome and let the machine format it. It took about a minute and did not tell me what it was doing..and It worked! It put two folders on my card, Emb5 and ord#5, and I was to copy the jef files into the Emb5 folder, which I did and bingo! my Janome 9500 read the card and produced a screen with my jef files in it. I am a happy camper....I don't know if this works with all Janome machines but it did with mine. Thanks for being here to help. Pepsi lady
I too have just purchased a new machine and had same problem. You have to put the card in your sewing machine first to format it. My machine is a Janome 10001 but think it is the same concept. When I save a design from the internet to the card I have to drag the design into one of the Emb folders which will show up on your card after it is formatted. Then after saving the design I can go back to the Emb folder that I saved it in and it will show up on the machine. Hope this helps.