Canon ir2800 is hanging after 2\3 copies what to do ?

web search canon printer error codes

ppress additional functions, 2 and 8 then additional functions again


Go through the following to clear the error: CLEAR >
ENGIN > ERRCLR; and then turn OFF and then ON

I think, I dont have an ir2800 manual. This is an error in the fusing section, so it may come back and require some parts replaced.

Hi there,
Well you may please follow the link below to get your manual -
http://www.givemefile.net/smanuals/_xerox_and_ifis/canon/ir-2800.html

Good Luck

Hi,
these is temperature related error, fixing fault.

First you need to try cancel it, follow these steps:

turn on the copier
press *
press 2
press 8
press *
select COPIER
select FUNCTION
select CLEAR
select ERR
OK
turn off and on

If these doesnt helps change fixing film assy ( heater )

Hope that helps

You can download a FREE manual in English here:

http://netfree1.blogspot.com/2008/05/canon-ir2200ir2800ir3300-service-manual.html

If this message appears and you can not make any copy, replace the toner
Original Toner CANON C-EXV3 Black Canon iR2200, iR2800, iR3300, iR3320i.

Hi, usually, if an iR22/28/3300 is very long to boot, to copy or to print, i watch for a faulty Ram module or Hard Disk. Try another Ram module from another similar copier if you can.

Regards, Mug.

The code referrers to M3 not turning "ON". Make sure the connector ( J3040-2 ) is connected all the way in.... Cheak all of the connections on all the pcb.. Good Luck

if the line is from the button to up must change the cleaner or you do the trick of cleaning it by any alcoholic liquid
and if the line appear only in the printed area so you must change the drum

Hi!

I'm not sure why the rotation is occurring, but I believe you can find the solution in one of the manuals you can download here:

http://www.mymbs.net/codo.html

Please let me know if this helps!
Bob