Question about Konica Minolta bizhub C250 All-In-One Laser Printer

1 Answer

Cannot scan to email Konica Minolta 250 Bizhub

When I add the email address on the smtp scan to email settings it says invalid value. This is after I have pinged the email server address as well!

Server email address is correct and bizhub is on nw as I can connect to it via Mozilla.

Thanks

Allan

Posted by on

  • 2 more comments 
  • Anonymous Mar 13, 2014

    Inputing an email address so i can scan paperwork inot my computer

  • Anonymous Mar 13, 2014

    This comes up when I try to scan a document to my email address.

  • Anonymous Mar 21, 2014

    How do I remove the addresses froman e-mail before forwarding ? I do not see a "CUT" icon on your E-mail page.

  • Anonymous Mar 26, 2014

    Kyocera KM-C4035 that cannot connect to the smtp server when trying to scan to email.

×

1 Answer

To scan to email, Administrator email address must be set in the machine (any bogus email address will work too).
Also, email server address must be input as IP address if DNS or WINS is not running in LAN.

Posted on Mar 09, 2008

  • Robert Coveney
    Robert Coveney May 14, 2014

    How do I find the e-mail server address?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IPhone 5S: I can text photos to other people, but I can't email them to myself. I use a yahoo email address. I get the message: A copy has been placed in your Outbox. The connections to the outgoing s


There is not an SMTP outgoing server called 'apple.smtp.mail.yahoo.com'. Try removing 'apple' from the beginning of the SMTP outgoing server name in Settings > Mail, Contacts, Calendars > Yahoo Email Address > Click on email address. If that does help, re-add your Yahoo email to your iPhone and test the account again.

Yahoo Email Settings: https://help.yahoo.com/kb/mobile-mail/imap-server-settings-sln4075.html

Oct 06, 2014 | Apple iPhone 5

1 Answer

Xerox WC 3220 scan to e-mail problem with external smtp server(ISP). I am trying to configure the scanner to send mail. I follow up the instructions in the manual. When I try to test it I got smtp error ...


You can always find answers to your Xerox questions at www.xerox.com/support .

The 3220 does NOT support SSL, please verify if your email service is requiring SSL transmission. (Port 445 or 587 are indicators of SSL email requirements.) There are free email providers that will still send on port 25 without SSL. Xerox does not provide a list however so you will need to research these yourself.

Instructions for setup scan to email below:
Configure the Machine for Scan to E-mail
IMPORTANT: Obtain the following information from your e-mail service provider before configuring the machine for Scan to E-Mail.
  1. What is the host name or IP address of the SMTP server?
  2. What port number does that SMTP server require?
  3. Does the server require authentication login? If so, what format does the server expect the login? (Does the server require the full e-mail address or just the part before the @ sign?)
  4. Does the e-mail server require POP3 before SMTP authentication? If so, obtain the POP3 settings (POP3 host name or IP address, port number, and login name/password).
  5. Does the server require SSL or TLS encryption? If so, ask your e-mail provider to provide you with an e-mail server that does not use SSL or TLS encryption as the printer does not support SSL/TLS encryption for e-mail authentication.

    NOTES:
    • If you are provided with a new e-mail server to use, questions 1 - 7 will need to be answered again.
    • Xerox does not provide a list of e-mail providers that do not require SSL/TLS encryption for e-mail authentication.
    • If unable to find an e-mail service that does not require SSL or TLS encryption, See theRelated Items below for information on how to Install the Network Scan program for a Windows OS or how to Install the USB Scan Driver for a Macintosh OS. Once the scanned file is stored on your computer, it can then be e-mailed from your computer as an attached item/file in a new e-mail.
  6. What is the attachment size limit on the account on that server?
  7. What 'From' address will the printer use for Scan to E-mail? The From address should be a valid e-mail address for the e-mail server that the printer will use. Ask the e-mail provider if authentication is required if the login name (above) is allowed to be used for the From address the printer will use.

    If you do not know the answer to the questions above, contact the people that control the e-mail server you want the machine to use for Scan to E-mail. The following parties can provide you with additional assistance:
    • If the e-mail server is inside your company's network, contact the E-mail Server Administrator to obtain the required settings.
    • If the e-mail server is outside your company, contact the Technical Support for that e-mail service to obtain the required settings. This may be your Internet Service Provider (ISP), or a 3rd party E-mail Service Provider.
Configure the Machine's E-mail Settings Using CentreWare Internet Services (CWIS)
After you have obtained the above information, configure the machine's e-mail settings using CWIS.
  1. Access CWIS. See the Related Items below for additional information.
  2. Click on the [Properties] link.
  3. In the Properties section on the left side of the window, click on the [+] symbol next to theProtocols folder to expand the list of options.
  4. Click on the [SMTP Server] link.
  5. Click on the [IP Address] or [Host Name] radio button.
  6. Enter the IP address or domain (host) name of the SMTP (e-mail) server in the field provided.

    NOTE: If you use an IP address for the SMTP server, verify that the IP address for the server will not change. If the SMTP's server IP address changes, the machine will be unable to Scan to E-mail until the machine's SMTP Server address entry is edited with the new SMTP server IP address. If necessary, contact your E-mail Administrator to verify how the IP address has been assigned to the SMTP server.

    NOTE: If using the domain (host) name, make sure DNS is enabled on the machine. By default, DNS is disabled. To enable and configure DNS settings, click on the Properties tab, click on the TCP/IP link under the Protocols folder, enter the required DNS settings for your network in the DNS/DDNS field, and then click on [Save Changes]. Contact your Network Administrator to obtain the correct DNS settings.
  7. Enter the port number used by the e-mail server, from 1 to 65535, in the field provided. The default port number is 25. If you use an IP address for the SMTP server, verify that the IP address for the server will not change.

    NOTE: If you use an IP address for the SMTP server, verify that the IP address for the server will not change. If the SMTP's server IP address changes, the machine will be unable to Scan to E-mail until the machine's SMTP Server address entry is edited with the new SMTP server IP address. If necessary, contact your E-mail Administrator to verify how the IP address has been assigned to the SMTP server.
  8. If authentication is required, insert a check mark in the SMTP Requires Authentication check box.
  9. In the SMTP Server Login Name field, enter the SMTP login name.
  10. In the SMTP Server Password field, enter the SMTP password and then retype the same password in the Verify Password field.
  11. If the E-mail server requires POP3 before SMTP authentication, continue with step 13. Otherwise skip to step 17.
  12. If POP3 before SMTP authentication is required, insert a check mark in the SMTP requires POP3 Before SMTP Authentication check box.
  13. In the POP3 Server and Port field, enter the IP address or domain (host) name of the SMTP (e-mail) server and the port number. The default port number is 110.
  14. In the POP3 Server Login Name field, enter the POP3 login name.
  15. In the POP3 Server Password enter the POP3 password and then retype the same password in the Verify Password field.
  16. Click on the [Save Changes] button.
  17. In the Properties section on the left side of the window, click on the [+] symbol next to the E-mailfolder to expand the list of options.
  18. Click on the [E-mail] link.
  19. Click on the [E-mail Setup] link.
  20. In the Default [From:] Address field, enter the from E-mail address that the printer will use for sending E-mail.

    NOTE: If you do not want the from address that the printer will use to send E-mail to be automatically copied on any E-mail that is sent from the printer, make sure that the check box next to Always prompt for file format setup before scanning is not checked. Additionally, the following default settings can be set for Scan to E-mail:
    • Default Original Type - Available options are: Text, Text/Photo, and Photo
    • Default Scan Resolution - Available options are: 100 dpi, 200 dpi, and 300 dpi
    • Default Attachment Type - Available options are: PDF, TIFF - Multi Page, and TIFF - Single Page
    • Default Scan Color - Available options are: Mono, Gray, and Color
    • File Format Setup Prompt - Leave this box unchecked if you do not want to be prompted for the file format each time you Scan to E-mail.
    • Conformation Sheet - Available options are: On Errors Only, Always, and Off
  21. Click on the [Save Changes] button.NOTE: See the Related Items below for information on how to Scan to E-mail. When Scan to E-mail is successful, it is recommended to print a copy of the SMTP Server settings and E-mail Setup settings from CWIS for your records. If Scan to E-mail fails in the future, refer to these settings.
Configure Additional E-mail Security Settings (Optional)
For additional security when sending e-mails, the machine can be configured to require the sender to be authorized prior to using the machine's Scan to E-mail service. This is an optional security feature for Scan to E-mail and is disabled by default.
Authorized users for Scan to E-mail can be configured using CWIS. Up to 2,000 users can be registered.
  1. Access CWIS. See the Related Items below for additional information.
  2. Click on the [Properties] link.
  3. In the Properties section on the left side of the window, click on the [+] symbol next to the E-mailfolder to expand the list of options.
  4. Click on the [User Authentication] link.
  5. Insert a check mark in the Enable Auth User check box to enable user authentication.
  6. If necessary, insert a check mark in the Enable Guest Account check box to allow guest access. If this option is enabled, enter a login name and password for the guest account in the fields provided.
  7. Click on the [Add] button to add new accounts.
  8. Enter a username, an authentication ID, a password and an e-mail address in the fields provided.
  9. Click on the [Save Changes] button. The user will be added to the User Authentication List.

Nov 04, 2013 | Xerox WorkCentre M20i All-In-One Laser...

1 Answer

What does "invalid input" mean when setting up smtp on


There is another setting to allow the secure email connection to work.
First go to Security drop down menu, then Network Security menu item. Now go to Secure Connection in the left menu.In here you'll see an option for Secure SMTP.Pick either SSL or TLS, whichever you need. SSL encrypts the whole conversation between the printer and the mail server, TLS only encrypts the password send.Once you select one, go back to the original email config page you were on by going to the Settings dropdown menu, then choose Network Settings.Here you'll see Outgoing Mail Server SMTP as a menu item on the left.Now you can fill in your SMTP server settings with either SSL or TLS which is the same as you've just configured in the Secure Connection area just before and also fill in your smtp login details.Be sure to use a real email address for "Default Address:" in the Advanced section at the bottom of the page here, so that your test email has someone to go.Click test then check the inbox of that email address.
Worked for me.

Strange to have two settings for the same thing in different places that must line up or it fails.

Hope this helps people out :)

P.S. This was tested on a Samsung CLX-6260 Series

Oct 03, 2013 | Samsung Office Equipment & Supplies

2 Answers

On C35 bizhun get error when scan to email SCAN TX FAILED JOB CANCELLED any help?


your email settings got messed up... you need to go to pagescope (web interface) by typing the ip address in your webbrouser that is connected to the network and check the scan settings to see if mybe you missed something or if something has changed....

Oct 07, 2011 | Konica Minolta Konica Bizhub C353 Drum...

1 Answer

We cannot scan to email from our Sharp AR-M237 Multi-function "Error[973]: Incorrect format for Primary SMTP Server." I am using all the settings for SMTP that I use everywhere else. HELP?-pjm


Model AR-M257 - I have several Sharp MFP devices at different locations and all are set up to scan through our email server using a special account I have just for this purpose. I have all of them setup using the external IP address of our Exchange server (not its name or FQDN) and I have firewall rules setup to allow SMTP from the WAN IP addresses of our different offices to the LAN IP address of the Exchange server. It worked at all the others but this one. I was getting the following error when trying to send a status message (under Log) from the device to my email account as a test: [error 973] incorrect format for primary smtp server. And when I tried to scan through our email server I would get "network error". However, a connection test succeeded. I had everything set correctly for SMTP and DNS but as I was trying anything I could to get it working I went to mDNS under Services and it was enabled. I disabled it and then I could get a status message to be sent to me and we could send a scan through our email server.

Apr 12, 2010 | Sharp AR-BC260 Color Copier

1 Answer

Scan to email gives server response error in home network. SMTP server tried by IP address and DNS name. Port 25 Authorisation POP for SMTP. The other authorisation types give a network error straight...


I've just discovered that Ricoh's built in software only works if your SMTP server sends out without picking up password or authentication.
Having same issue and it worked fine when it was behind corporate firewall with the same connection settings (IP address) as the SMTP server.
Once I changed web hosting - it won't recognize the SMTP server or any authentication methods. According to IKON (Ricoh support for the USA) - your SMTP server has to have "relay exception"

Feb 20, 2010 | Ricoh Aficio SP C222SF All-In-One Laser...

1 Answer

How do I set up a mail account so I can email photos from my iphone? I use hotmail. Iphone won't bluetooth.


Ok, go to settings, then mail, contacts calender. Go to add account, select other
for hotmail then add account. Fill in all relevent details as normal, hit save.
It will verify account info then will appear above "add account" click on it and
the settings should be filled in. If not fill in name address = email address, description = email address, host name = pop3.live.com, username = email address, password.

Then click on smtp server (bottom of current page)
for outgoing mail and check primary server is smtp.live.com

If smtp needs configuring go into smtp add primaru server as smtp.live.com as host name, user name is yor email address, password, ssl to ON, port 587.

Hope this all helps and please vote if it does.

Thanks

Jim

moz-screenshot.pngmoz-screenshot-1.png

Oct 09, 2009 | Apple iPhone 3G

1 Answer

Hey, i need setting for orange to use on my new i68 phone in the uk. please help!! thanks, scott mulligan


over 1000 wallpapers -100s of Java games - user manual and FAQ - video conversion software - MP3 to ringtone converter - Settings for every USA, UK, and most of World GSM service providers - Automatic internet setup - Automatic configuration of MMS settings - Beginner Guides and Tutorials- Link to the best site for everything i9 related - paypal 10 us dollars to digitalunderground23@yahoo.com
o2 GPRS settings:
O2 GPRS settings (WAP):
Note: Different settings for contract and PAYG (Pay as you go)

Homepage: http://wap.o2.co.uk/
APN address (contract): wap.o2.co.uk
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : o2wap (contract) / payandgo (PAYG)
Password: password
Session type: Continuous / permanent
Authentication: Normal
Security: Off
Port number: 9201
O2 GPRS settings (Email/Web):

Homepage: http://pda.o2.co.uk/
APN address: mobile.o2.co.uk
Username: mobileweb
Password: password
Session type: Continuous / permanent
Authentication: Normal
Security: Off

Email servers (POP): mail.o2.co.uk
Email servers (SMTP): smtp.o2.co.uk
DNS Servers: 193.113.200.200 and 193.113.200.201


Orange GPRS WAP settings:
Orange GPRS settings (WAP):

Homepage: http://orange.multimedia/
APN add. (Contract): orangewap
APN add. (PAYG): paygwap

Gateway (IP) address : 192.168.71.35
Username: Orange
Password: Multimedia
Session type: Continuous / permanent
Authentication: Normal
Port number: 9201 (or 8080)
Orange GPRS settings (Email/Web):

Homepage: http://orange.multimedia/
APN address: orangeinternet
APN add. (Old PAYG): payginternet
Username: user
Password: pass
Authentication: Normal

Email SMTP server: smtp.orange.net
Prim. DNS Server: 158.43.192.1
Sec. DNS Server: 158.43.128.1

Jun 27, 2009 | AT&T CECT Unlocked i68+ Quadband GSM FM...

1 Answer

Scanning to C352 server connect error


Check you smtp server settings in admin settings. Verify there correct. If your smtp server needs your email address and password to send, that should be populated as well under them smtp authentication settings.

Oct 20, 2008 | Konica Minolta bizhub C250 All-In-One...

2 Answers

Scan to email


Scan to email needs an IP address or the SMTP server name and the port. Now it depends if you use an SMTP server or are you just at home? Normaly the SMTP port is 25. The SMTP server could be the one you use in your email account as well. Something like mail.upc.ie. If you dont have a SMTP server you cant set up scan to email.

Aug 29, 2008 | Xerox Phaser 3200MFP/N Laser Printer

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

13,677 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6005 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

George Mclaughlin

Level 2 Expert

334 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...