Setting up D-Link WUA-2340 Wireless to PS3 w/ d-link router

The D-Link WUA-2340 is an 802.11g adapter. This means that 54mbps is the fastest that it can run. It is backward compatible with the 802.11b standard which runs at 11mbps. However, it is not forward compatible to 802.11n. You need to get the DWA series from D-Link (I'm guessing you have a preference for D-Link). This should run your D-Link DIR-825 at 100mbps +.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/mark_1e5d703456353ef9

Yes.
You can download the needed program here:
ftp://ftp.dlink.com/Wireless/wua2340/Drivers/wua2340_drivers_150.zip

Hi Ceejay,

I got your issue and you need the manual for your WUA -2340 wireless adapter and here is the link

ftp://ftp10.dlink.com/pdfs/products/WUA-2340/WUA-2340_ds.pdf

Please do give me thumps if its useful

Thanks & Regards,
Prema

Go here: http://www.dlink.com/products/default.aspx?pid=WUA-2340&tab=3

click on 'support resources' choose country and then download the required driver

2 things. You might be connected to the wireless but not to the network. Check the TCP/IP settings. Also check the security settings on the wireless connection

What router are you using?
Most routers sold until recently have been 802.11b/g (54mbps) routers, it must be 802.11b/g/n to run at 108mbps.
The adapter will self adjust to the older standard if it cannot detect if the faster standard is available.

Hi Antonio, you need to make sure your routers wireless settings match the settings of the computers wireless adaptor. Both need to be exactly the same.

You can find the installation drivers here:

http://support.dlink.com/products/view.asp?productid=WUA%2D2340

Best of Luck!

http://support.dlink.com/products/view.asp?productid=WUA-2340

This is the direct link for the driver for this adapter http://www.driverstock.com/D-Link-WUA-2340-driver-download/24-28-11291/index.html

Hope that helps.......