Question about Symbol MC3000

1 Answer

White Display on Symbol MC3000

Hi Guys,

My symbol will only display a white screen and nothing else.
Tried another PC but same still.

other Scanner are okay with same model also.

Please advice on what happened or any solutions?

Thanks

Posted by on

  • chips4brains May 11, 2010

    Can you put the device in IPL mode? You do this by doing a cold-reset 1,9 and power then after the led below the display flashes press and hold the yellow scan button. If you get the IPL screen, select the reset option and restart the device. If it still hangs on the white screen then you will need to re-image the device using the TCM utility which you can download from Symbol/Motorola support site. You will also need to download the correct hex image for the device you have.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

7+9+Power. Terminal warm reset. It's all.

Posted on Oct 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have symbol ls9100 400bc it read barcode but does not display out put


Seems like you need to setup the communications protocol. You need to setup the type of communication that the device you are connected too if serial port then RS232 plus baud rate data bits parity etc.

Nov 10, 2014 | Zebra LS9100 PEARL WHITE HOLDER ROHS

1 Answer

Scanner 'beeps' etc, but no output on the screen!?


there are a SDK you can try it, confirm that the you had installed the drive.

May 06, 2014 | Symbol LS2208 Handheld

1 Answer

How to upgrade my mc3000 from wince 4.2 to wince 5.0 platform


MC3000 CE4.2 Pro OS to CE5.0 Pro OS upgrade license for MC3070 Configurations. MC3070 S/N must be supplied to Symbol for each device to be upgraded (Microsoft requirement). This application enables device to load CE 5.0 Pro OS available only from Symbol’s Technology Center.

P/N SWE-86374-01

there is also, ce core.. these will need to be ordered through a motorola partner

if you need additional information please feel free to contact me at kganoe@datexcorp.com

Mar 30, 2010 | Unitech MS 180: MS180-1KG Handheld Barcode...

1 Answer

I have a dell inspiron 15 when I turn it on the dell symbol and insprion page comes up then goes to a black screen. When I press F8 I get black screen with white bars at the top and bottom and a white bar...


You are having a display problem with the LCD, so kindly have it checked from dell and get the LCD display replaced from them if your laptop is under warranty

Nov 18, 2009 | Dell Inspiron 8500 Notebook

1 Answer

I can't boot a Symbol MC9090.


She's Broken...contact your dealer or the Motorola Help Desk at 1-800-653-5350.

Oct 02, 2009 | Zebra Symbol Technologies MC909X-G Series...

2 Answers

Wont show image in the lcd display while taking photo?


Can you more clearly what you mean "while taking photo"?If lcd not display image...is that any text or symbol in the lcd?If you can still see the symbol or text in the lcd, I think you have trouble in your lens or ccd.
Trouble in the lens usually make the lcd display white screen. And, if ccd trouble the lcd display white horisontal line and if so hard broken the lcd display black screen, but the symbol or text is shown.

Sep 20, 2009 | Canon PowerShot A75 Digital Camera

1 Answer

Blanck white screen


it was fixed by doing a warm boot.

turn of your handterminal MC3000

Press 7+ 9 + power button at the same time, and hold. Then the warm reboot will begin.

after that, follow the instruction on the screen.

Dec 15, 2008 | Symbol MC3090 Portable Data Collector...

1 Answer

White vertical lines


the LVDS cable between the units mainboard and LCD is loose, or the LCD driver IC is on the way out. the only way to fix this is to reseat the cable or replace the mainboard

Apr 28, 2007 | Symbol MC3000 Portable Terminal

Not finding what you are looking for?
Symbol MC3000 Logo

Related Topics:

567 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Computers & Internet Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

pkwc

Level 2 Expert

254 Answers

volk1

Level 1 Expert

20 Answers

Are you a Symbol Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...