Question about GPS

2 Answers

How do I space things out when doing addresses

Posted by on

  • 1 more comment 
  • MNatale11 Mar 04, 2008

    Tomtom one



    Thanks Mike

  • MNatale11 Mar 04, 2008

    Thank you -Thank you. I find it hard to really get started but, It could be that I just need more experiance.



    Thanks again,

    Mike

  • Kevin Miller May 11, 2010

    What GPS unit do you have?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What about space key when entering CITY? For example,

St Simons Island

Posted on Jan 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 504 Answers

If you are asking how to space things such as state names, etc., there is a blank key on the keypad when you are entering addresses. This is the space key and will put a space between letters. If there is something else you are trying to do, please let me know.

Posted on Mar 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Microsoft Links LS 2000 installed fine on Windows XP laptop, however, when i tried to start the game, a notification came up saying I had on 16MB of space left on my hard drive. I have over 300GB free...


1. Can Windows access memory above 4GB?

a. 32-bit - NO

b. 64-bit - Maybe (due to chipset limitations)

2. Can your processor access memory above 4GB?

a. If it's recent then it might, and if it's either AMD64 or EM64T it's almost certain

3. Does your chipset allow pages to be remapped above 4GB?

a. Probably not - and that's what's catching people who install 64-bit Vista to work around point 1 - they find they still cannot see above 4GB

In some cases, OEMs may be able to tweak their BIOS to reserve less memory for platform use, but we're not talking a huge difference (ie, 100's of MBs).

In the end a 32-bit OS and/or application can only, ever, handle 4GB of memory at a time, the AWE stuff just swaps chunks of memory in and out of that 4GB space, thus fooling the application and OS into using more space than it can "see".

Physical Address Extension (PAE), extends the physical address space to 36-bits if your HW supports this. For most operations, the processor execution units will only see 32-bit addresses, the MMU will take care of the translation to 36bit addresses. No swapping here, only page translations (which are used regardless of PAE being on or not), this is a fundamental feature of any virtual memory operating system.

The OS and apps only see 32-bit addresses because the registers are limited to 32-bits (hence the "32-bit" architecture nomenclature). These are linear addresses which are extended to 36-bits in the translation to physical addresses, but they never show up in registers since there's no room. It's all internal until the address lines coming out of the chip are toggled. Thus my comment above about "if your H/W supports this (PAE)". I'm not going into how that works...

So, the OS can happily handle up to 64 GB of memory for 32-bit PAE-able systems.

Hope this helps explain the whole, 'Why can't I see 4 Gig of RAM in my system?" thing...

BTW - This does not change for Vista either...

references:
http://support.microsoft.com/kb/929605/e...

HWJunkie DL (MSFT internal)

Bob Heath (original author of this summary material)Source(s):

Sep 19, 2011 | Microsoft Links LS 2000 for Windows

1 Answer

Cannot get wireless conection to laptop


Hi Sheila,

First thing you can do is a ipconfig /release /renew
to do that, go to:

Start>All Programs>Accessories>Command Prompt.
Once thats open, type in ipconfig /release
note, there should be a space between ipconfig and /release and renew
your ip address should come up with 0.0.0.0

Now type in ipconfig /renew
remember a space between ipconfig and /renew
You should see an ip address of 192.168.XXX.XXX or 10.10.XXX.XXX something like that, depending on your network settings.
if you do, you should be able to get on the internet.

If you see an address of 169.254.XXX.XXX
Then it would be best if you powered off the Modem and the Router.

First turn off the Router, Next the Modem.
Power back on in reverse order and see if it is able to connect then.

If all that fails, You can reset the router and see if it will connect then.
You should have a reset button on the back of the router.
Remember once the router is reset, you'll have to redo the security settings.

Hope this helps!

May 19, 2011 | Office Equipment & Supplies

1 Answer

I'm online trying to register for a P/P Prem Account and I've filled in the first page of personal info...Name, Address, email & password etc. activate it at the bottom of the screen ... &...


I checked it right now, and you don't need to put a middle name.. These are the only things you need to input:

  • Email Address: Please enter a valid address in the format name@domain.com.
  • Password: Your password must contain between 8 and 20 characters. Please enter a longer password.
  • First Name: Please enter only letters, hyphens, spaces and commas.
  • Last Name: Please enter only letters, hyphens, spaces, and commas.
  • Address line 1: Please enter a valid Address line 1.
  • City: Please enter a valid City.
  • Home Telephone: Please enter a valid telephone number.
  • Date of Birth : Please enter your date of birth.
Hope this helped! =)

May 19, 2011 | PayPal Accounts

1 Answer

I can connect to my home network but not the internet. Gateway Ping says failed


First thing you can do is an ipconfig /release /renew
to do that, go to:

Start>All Programs>Accessories>Command Prompt.
Once thats open, type in ipconfig /release
note, there should be a space between ipconfig and /

your ip address should come up with 0.0.0.0

Now type in ipconfig /renew
remember a space between ipconfig and /renew
You should see an ip address of 192.168.XXX.XXX or 10.10.XXX.XXX something like that, depending on your network settings.
if you do, you should be able to get on the internet.

If you see an address of 169.254.XXX.XXX
Then it would be best if you powered off the Modem and the Router.

First turn off the Router, Next the Modem.
Power back on in reverse order and see if it is able to connect then.

If all that fails, You can reset the router and see if it will connect then.
You should have a reset button on the back of the router.
Remember once the router is reset, you'll have to redo the security settings.

Hope this helps!

Don't forget to rate;)

Gary

May 18, 2011 | Computers & Internet

1 Answer

Netbook wont let me on the internet


First thing you can do is a ipconfig /release /renew
to do that, go to:

Start>All Programs>Accessories>Command Prompt.
Once thats open, type in ipconfig /release
note, there should be a space between ipconfig and /release and renew
your ip address should come up with 0.0.0.0

Now type in ipconfig /renew
remember a space between ipconfig and /renew
You should see an ip address of 192.168.XXX.XXX or 10.10.XXX.XXX something like that, depending on your network settings.
if you do, you should be able to get on the internet.

If you see an address of 169.254.XXX.XXX
Then it would be best if you powered off the Modem and the Router.

First turn off the Router, Next the Modem.
Power back on in reverse order and see if it is able to connect then.

If all that fails, You can reset the router and see if it will connect then.
You should have a reset button on the back of the router.
Remember once the router is reset, you'll have to redo the security settings.

Hope this helps!

Dec 27, 2010 | Sylvania G-Netbook

1 Answer

When connecting to a wireless network, no ip address is returned, therrefore no internet connection, even with ethernet connection is unsuccesful


First thing you can do is a ipconfig /release /renew
to do that, go to:

Start>All Programs>Accessories>Command Prompt.
Once thats open, type in ipconfig /release
note, there should be a space between ipconfig and /releaseyour ip address should come up with 0.0.0.0

Now type in ipconfig /renew
remember a space between ipconfig and /renew
You should see an ip address of 192.168.XXX.XXX or 10.10.XXX.XXX something like that, depending on your network settings.
if you do, you should be able to get on the internet.

If you see an address of 169.254.XXX.XXX
Then it would be best if you powered off the Modem and the Router.

First turn off the Router, Next the Modem.
Power back on in reverse order and see if it is able to connect then.

If all that fails, You can reset the router and see if it will connect then.
You should have a reset button on the back of the router.
Remember once the router is reset, you'll have to redo the security settings.

Hope this helps!

Dec 27, 2010 | Dell Computers & Internet

1 Answer

My wireless says its connected but its not what do i do?


First thing you can do is a ipconfig /release /renew
to do that, go to:

Start>All Programs>Accessories>Command Prompt.
Once thats open, type in ipconfig /release
note, there should be a space between ipconfig and /release and renew
your ip address should come up with 0.0.0.0

Now type in ipconfig /renew
remember a space between ipconfig and /renew
You should see an ip address of 192.168.XXX.XXX or 10.10.XXX.XXX something like that, depending on your network settings.
if you do, you should be able to get on the internet.

If you see an address of 169.254.XXX.XXX
Then it would be best if you powered off the Modem and the Router.

First turn off the Router, Next the Modem.
Power back on in reverse order and see if it is able to connect then.

If all that fails, You can reset the router and see if it will connect then.
You should have a reset button on the back of the router.
Remember once the router is reset, you'll have to redo the security settings.

Hope this helps!

Dec 17, 2010 | Acer Computers & Internet

1 Answer

Cant connect to the netgear N600 router, keeps me at the acquring network address screen. what do i do!?!?!? I do not know what setting to change in the router to let this computer go through. This...


First thing you can do is a ipconfig /release /renew
to do that, go to:

Start>All Programs>Accessories>Command Prompt.
Once thats open, type in ipconfig /release
note, there should be a space between ipconfig and /release and renew
your ip address should come up with 0.0.0.0

Now type in ipconfig /renew
remember a space between ipconfig and /renew
You should see an ip address of 192.168.XXX.XXX or 10.10.XXX.XXX something like that, depending on your network settings.
if you do, you should be able to get on the internet.

If you see an address of 169.254.XXX.XXX
Then it would be best if you powered off the Modem and the Router.

First turn off the Router, Next the Modem.
Power back on in reverse order and see if it is able to connect then.

If all that fails, You can reset the router and see if it will connect then.
You should have a reset button on the back of the router.
Remember once the router is reset, you'll have to redo the security settings.

Hope this helps!

Dec 15, 2010 | NetGear WNDR3400 N600 Wireless Dual Band...

2 Answers

Where is space bar located on address screen?


The space bar on your unit is on the bottom of the keyboard, next to the "M" key. It looks something like this [, but on it's back. Let me know if this helps.

Jan 04, 2010 | Garmin nuvi 200W GPS Receiver

1 Answer

How do I space when putting in an address


To add a space you touch an icon on the screen which is beside the letter M and just above the Done button on the enter name screen.

Hope this helps. Please remember to rate my answer. Many thanks.

Jul 07, 2009 | Garmin nuvi 250W GPS Receiver

Not finding what you are looking for?
GPS Logo

Related Topics:

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top GPS Experts

yadayada
yadayada

Level 3 Expert

67757 Answers

Will Halftowaite

Level 3 Expert

503 Answers

The Knight
The Knight

Level 3 Expert

71611 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...