Updated HP Compaq d220M to XP Pro, Downloaded all available drivers from, but can't distiguish which file contains the USB controller drives, don't have original install disk unit was sold without OS,,,,any thoughts??
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I hope the following information is helpful.
If you are trying to install the driver for the Broadcom ethernet NIC that was pre-installed (NOT an ethernet card that you purchased and installed yourself), there is a softpack (updated driver installation) download available from HP/Compaq. It will install the driver automatically for you, just download it from the link below and run the ".exe" file.
IMPORTANT: Check to be sure that your current Operating System, and model of the network device you are trying to install, are BOTH listed below BEFORE you download!
This is a software / driver update for the HP Compaq d530 ultra-slim desktop: All Models Supported network devices: BCM5906MBroadcom 10/100/1000 5782 based NICBroadcom 570x 10/100 Integrated controllerBroadcom NetXtreme Gigabit Ethernet 5782Broadcom NetXtreme Gigabit Ethernet PCI-ExpressNetXtreme(tm) 10/100/1000 Gb NIC Supported Operating Systems:Microsoft Windows 2000
Microsoft Windows 98
Microsoft Windows NT 4.0
Microsoft Windows Vista Business 32 Edition
Microsoft Windows Vista Business 64 Edition
Microsoft Windows Vista Enterprise 32 Edition
Microsoft Windows Vista Enterprise 64 Edition
Microsoft Windows Vista Home Basic 32 Edition
Microsoft Windows Vista Home Basic 64 Edition
Microsoft Windows Vista Home Premium 32 Edition
Microsoft Windows Vista Home Premium 64 Edition
Microsoft Windows Vista Starter 32 Edition
Microsoft Windows Vista Ultimate 32 Edition
Microsoft Windows Vista Ultimate 64 Edition
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
Microsoft Windows XP Professional x64 EditionINSTALLATION INSTRUCTIONS:
1. Download the file by clicking the "Download" or "Obtain Software" button and
saving the file to a folder on your hard drive (make a note of the folder where
the downloaded file is saved).
2. Double-click the downloaded file and follow the on-screen instructions.LINK where file can be downloaded:HP/Compaq Support-Broadcom Driver download Again, I hope this information is what you neededto install your network device. Should this not answer your question, please come back, provide more details of your problem, and we will be happy to help!Best of luck to you!
SR2180NX has the Vista 32Bit OS from HP. The restore partition will always put Vista 32Bit back on if you use it. Windows XP can only be put on from scratch and I have done it while I still have Vista installed. One problem: there are no XP drivers under SR2180NX webpages. Do your research on the parts that are installed in the 2180 and any other HP machines that have the Windows XP operating system as the OEM OS. But First, check the Intel Site for the 945 chipset drivers (include the SouthBridge, too) under XP. Get them downloaded to a CD and burn the rest of the drivers you find for XP on the same CD. This way, you will have them ready when you are performing the down-grade to windows xp. After you are done with the XP install, you will still have access to the files & work you had done while in Vista. The Vista files are still readable. You might want to consider getting the Windows 7 Professional (not basic) available October 22, 2009. AND you will still have to get the Intel Downloads for Win7 any way, so why not make it a project and make it last for a few years. XP Support stops in 2014.
in motherboard's cd, the net adapter drivers are included. it uses a Ethernet adapter and works perfectly.
to use the net adapter to a network, you'll need to configure that terminal in Network Connections (Start Menu) to LAN Connection. There you'll type the setting given by the network administrator, where the internet main server is connected (modem to line out).
Remember, the authorization to internet user must be given by the administrator too because of the modem-router, being in a network
We had the same problem and tried all of the drivers & even the expired link here, but then went back and discovered the PRO 100 drivers contained in the HP Intel PRO/1000 GT drivers download file sp33671.exe (64 MB), 184.108.40.206 A (4 Sep 2006). Choose to extract to a non-temporary folder, it will produce C:\swsetup\SP33671\PRO100\Win32\ by default and that is where we found the driver. Hope it helps!