My whirlpool duet gets to the spin cycle and gets to the super, fast speed and shuts down and gives me a F06 error. Is there anything I can check before getting a repair person involved?
Drive Motor Tachometer Error
The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin the door will be unlocked after 3 minutes.
Potential Causes
•Check wire harness connections between the Drive Motor/Tachometer and the Motor ControlUnit (MCU), and between the MCU and the Central Control Unit (CCU)
•Check the Drive Motor
•Check the MCU
•Check the Wire Harness
304 views
Usually answered in minutes!
×