Question about RCA HD52W59 HDTV Projection Television

1 Answer

No picture lately, when I have turned TVon it takes longer for picture to come on (sound comes on immediately). Today,there was a loud pop, and the TV went black -no sound and no pic. Help!!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,030 Answers

Humm from the sound of a loud pop that would tell me you have a high voltatge problem. at the shop i have seen when i replaced tubes in this set that when the tubes are unbalenced (screen voltages) then sound will come up with no picture. then the tubes warm up and the picture comes up. this is an idication that one of the tubes have gone bad. and now that it has completly failed i suspect it has taken the horizontal ouput transistor and possilby flyback tranforner, NOW what all that tech talk means? not good im sorry. but in my opion this set is not good. these set cost about 800 new at your local walmart. We charge at my shop bout 600 to 700 for such a repair..of course u may get a tech to look at it and find something simple. but i feel this is the case if you have any more qestion feel free to email me or ask again here willie@fordtv.com

Posted on Mar 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loud pop


Check the lamp.
Pull it out and look at it.
More than likely the lamp has shattered inside the set and needs replaced.
Bulb replacement is made for consumers and can easily be replaced.
Need any more information, respond to this post and I will reply.

Dec 30, 2007 | Panasonic PT-45LC12 45" Rear Projection...

1 Answer

Did my tv just blow up?


Yes, I think you have lost the bulb and maybe the color wheel is on the way out too. But try a bulb first. If the old one has a broken "glass tube" in the center--be assured it is bad.

Oct 10, 2009 | Samsung Projection Televisions

1 Answer

Tv picture does not come on


my first question is have you checked the bulb. the loud pop sound like the bulb blew and the rattling sounds like the lamos trying to fire. remove the bulb cover and unscrew the bulb

Mar 18, 2009 | RCA Scenium M50WH187 50" HDTV

1 Answer

Rca dlp tv popped crackled and no picture today.


just might be the bulb. Have you unpluged you set make sure its cooled down and remove the buld examine the bulb ussally when the bulbs go bad they shatter not always but it good to check them out as the first step

Nov 17, 2008 | RCA HDLP50W151 50" Rear Projection HDTV

1 Answer

Loud popping and decrease in volume


I'm guessing power supply problems fluctuating, or main control board.

Apr 19, 2008 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

Sound no picture


Try resoldering the vertical output IC this is acommon problem with this model

Mar 20, 2008 | Mitsubishi VS-5043 50" Rear Projection...

1 Answer

Tv making popping sound


Turn down the volume and see if you still hear it,a loud pop or snap could be high voltage call your servicer in your area ASAP
while its under warranty and have him check the high voltage circuits for a intermittenting pop or snap.And have the model # ready!! Good Luck!

Dec 08, 2007 | Hitachi 53UDX10B 53" Rear Projection...

Not finding what you are looking for?
RCA HD52W59 HDTV Projection Television Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...