Question about Mitsubishi VS-5043 50" Rear Projection Television

1 Answer

50" Mitsubishi The green light indicates the set turns on but then it turns right back off. No sound and no picture. Acts the same if manually turned on or using a remote. Tried resetting the set to an avail. I would appreciate any thoughts on the repairs and related expenses.

Posted by on

  • Mitsufandc Mar 10, 2008

    Same problem, same TV, as frustratedk on Mar 02, 2008: Mitubishi VS-5043 from 1997.


    The green light indicates the set turns on but then it turns right back off. No sound and no picture. Acts the same if manually turned on or using a remote. I would also appreciate any thoughts on the repairs and related expenses.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 113 Answers

Check the 5 volt pico fuses on the center board. F9A05 is most likley open. This would indicate bad convergence amps. The two Convergence amps and fuse should be replaced.

Josh

Posted on Mar 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blinking Green Light on Mitsubishi DLP 52525


the circut that detects the bulb has been also failing in these sets
and the conversion chip that controls the picture , and the transformers are not putting out the full power they are supposed to.
this set will need to be tested to determine the exact cause or causes

Oct 18, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

No picture or sound on TV


Have you activated the self check this set has that will indicate what error was picked up?

Dec 20, 2012 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

Turn tv on. green light solid display, no picture or sound


The flashing green light is likely indicative of a self-test failure, indicating the TV has detected some sort of internal fault. With no picture or sound, one strong suspect is the power supply. Flat-panel TV's have an internal DC power supply that converts the inbound AC current, and when these fail, or are unable to supply a minimum level of power to the set, it can behave as you describe, providing only enough power for the green light to illuminate.

Jul 28, 2012 | LG 50PG60UD 50 in. HD-Ready Plasma TV

1 Answer

We have a Mitsubishi Model 57733 and this morning when we turned the TV on, the picture is black. We have sound, but no picture. The lamp light indicator is solid green (no flashing, either green or...


Unplug the set from the AC outlet and wait at least 5minutes before reconnecting the Ac power. Turn on set and wait for light to stop flashing before trying to turn on again when it stops it is ok to turn on, if this does not solve the problem then purchase a new lamp. or the lamp ballast is faulty.

Dec 21, 2009 | Televison & Video

1 Answer

Mitsubishi TV Model VS45609 Blinking Green Light


I have a Mitsubishi VS 45609 tv. I turned it off at midnight and tried to turn it back on the next morning and nothing happens. Can you help?

Nov 03, 2009 | Televison & Video

1 Answer

WS-55517 Mitsubishi Rear HDTV projection tv will not turn on


2 blinks followed by 1 blink is the X-Ray protection-----means some problem in the High voltage circuit ---set produces over 25 thousand volts to fire the 3 picture tubes inside up----It could be excessive high voltage-------I think you would have to get lucky for someone to find and fix it in your home----more likely it will need a visit to a Repair shop.

Aug 20, 2009 | Mitsubishi VS-50605 50" Rear Projection...

1 Answer

Vizio P50HDM No Picture/No Sound


this is most likely the sustainer board(s) problem. Replacing the sustainer boards should correct this problem for you. you can get the parts at vancebaldwin.com

May 29, 2009 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

Mitsubishi WS-55909 dm board repair


I have a mitsubishi 48" integrated 1080. The Timer green light keeps blinking. I have no picture. Can this be the fuse? My coworkers say this might be the problem. Can I replace it myself? If so, where is it located?

meeh.shell@yahoo.com

Oct 13, 2008 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Mitsubishi WS-65809 turns off right away


check the collector drop on Q29a002. If it is less than 16 nano amps, repl ic u12 in conver circuit. stk392-570 and pico fuses f04 and f05 24v circ

Jul 28, 2008 | Mitsubishi WS-55857 55" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

70943 Answers

Jaime Hernandez

Level 3 Expert

2270 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...