I found two books that I used for my rca lyra but mine was an RD1071 and the books did not help past the install/connect. There was a rather complicated routine from which you walk through a reset. 1. get updated drivers - Real Player used to have them. 2. press and hold "play" switch for at least 5 seconds - a recovery mode if you get through that, there is a format and it lets you know when it is completed. The last part seems to be test mode if update was successful. unplug from computer. Press "play", "Stop" ; "last" button, "next" button, etc. to test. The old MusicMatch Jukebox used to support them but that was a REAL horror show.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
iLO Mp3 Player "Flash Error" 1. Connect the player to the PC using the USB cable. 2. Open Windows Media Player. 3. Go to the Sync or Devices tab and delete all content from the player. 4. Go to the Tools menu and select Options. 5. Select the Devices tab, highlight the ILO or Siren player and click on Properties. 6. Uncheck the box "Create Folder Hierarchy on Device"
I had this same problem. If I tried to turn the player on, it just gave me the "format the player" screen. If I turned it off (by removing the battery if necessary) and plugged it into a USB port, it could still be read as a flash drive. I could copy the files to a backup folder on my computer and then (using Windows) I could right-click on the drive and choose Format. When it was finished, I disconnected it from the computer and turned the player back on and it was able to boot normally (it took a little while, but it worked). After rebooting, it automatically recreated the MUSIC.LIB, MUSIC.SEC, SETTINGS.DAT system files and the VOICE directory. I plugged it back into the USB port and copied the music back onto it and it worked fine. So... back up the data and format the player...
My Musix MP3 when turned on says flash error please backup the data and format the player. When I put it in the computer no message to tell me how to do this comes up. I don't have the manual anymore. Please advise.
You should backup your data and format the player.
Plug her in, copy your music onto your computer, then format it by right clicking the drive in My Computer, then going to Format, then clicking Start.
After it's finished, copy your music back over to the player and it should be sorted.