Question about Washing Machines

2 Answers

Leaking washing machine

My washing machine is leaking, but not every time.it seems to only leak during the spin cycle. It either leaks everything or not at all. There was a clear hose off the first time, then it didn't leak for a few days, and now it has leaked again but it seems to only do it on the super setting and not medium or small.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

How did you get into the front of the washing machine? did you have to take it all apart (including dryer???) is there a simple way to open the front of the washer?

Posted on Mar 02, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Washing Mach... Master
  • 744 Answers

Washing machine is leaking This video will show you how to find that leak on any front loading washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Posted on Aug 05, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does it leak all over floor after last spin cycle?


my washing machine leaks water onto the floor during each spin ...

https://answers.yahoo.com/question/index?qid...
Feb 3, 2010 - During drain and spin only A washer that leaks only during the spin cycle often has a leak in the main drain hose. ... It happened to us due to over loading. ...something can get betwen the two tubs it this all fails your tub seal is ...

Sep 30, 2015 | Kenmore Elite Oasis 27052 Top Load Washer

2 Answers

Washer is leaking during rinse/spin cycle


What is the model number of your unit?

Nov 23, 2012 | Washing Machines

1 Answer

My whirpool WFS1071BD front load washing machine leaking when spinning


During drain and spin only A washer that leaks only during the spin cycle often has a leak in the main drain hose. Inspect the entire hose and correct any problem you find.

Oct 14, 2012 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Water coming out of the botton during spin cycle


Take the bottom panel off the waher, put water in the machine, and watch to see where it is leaking. If you don't see a leak during the regular cycle, put the machine in drain and spin mode, and watch for leaks there. You should find your leak during one of these cycles so you will know what part you need.

Feb 03, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

My top load whirpool washing machine leaks during spin cycle.


it only does it on the small load? does the water drain out before it goes into spin?

Nov 13, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Leaking


The pumps usually have rubber hoses fitted them and they can deteriorate over time, moreso around the clamps that hold them onto the pump. Also, maybe the pump has been slightly opened via a worn seal. Either way, there may be a risk of fire if any water gets onto the electrical connections of the pump or spray onto any other open electrical connection inside the machine. It would certainly be advisable to have it checked with some urgency.

During the final rinse and spin, I would think the pump may not be used during these cycles.

Hope this helps somewhat.

Sep 14, 2008 | Whirlpool WTW6400SW Top Load Washer

1 Answer

Washer leaking water from bottom


Probably a main tub seal, big job!

Nov 16, 2007 | Maytag MAV7600 Top Load Washer

1 Answer

Leak from maytag top load coin machine during spin drain cycle only


Possible that you would have a tub seal leak if it is only noticable during spin cycle. Possible that it "drips" slightly while in agitation, but not enough to notice it. While in spin mode you have a lot more parts moving as well as a lot more water pressure on the seal itself. Pump could also be leaking, but highly doubtful since it would leak a constant amount at all times. Good Luck!!! Jim

Sep 07, 2007 | Maytag MAT13MN Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...