- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The most common way to install a printer on a home network is to install it as a stand-alone device on the network, and then add a connection to the printer on each computer that is on the network.
Wireless printers use a built-in wireless card and plug into a power source, not your network or computer. After you turn on the printer, you need to refer to the information that came with the printer to set up a wireless connection to each computer on a home network. Security options for wireless printing are determined by each printer manufacturer.
You can also get the help from this site
Good Luck, and do rate the solution if got help
once the printer is installed on your router go to network neighbor hood on you computer and it should see the ip address all the computers should see the printer as soo as you plug it in and power it up you may have to re power the router so it takes in the new info from the printer
The printer has o go through a router to work for the other two computers. The only other solution is setting up a wireless network with internet sharing on a HOC and share all file and printer services though it. The main PC would act as a router. for $40.00 you can buy a router and make it work.
If you using a mac:
After choosing the Photosmart C7200 to print your file on the print preview, change PAPER SIZE to 4x6, then lower down, change from PREVIEW to PAPER TYPE/QUALITY, more options will open underneath, on SOURCE, change from MAIN TRAY to PHOTO TRAY. You should also change the PAPER TYPE to some kind of PHOTO PAPER (whichever one your using, but the standard seems to be HP ADVANCED PHOTO PAPER)
You must have a network set up, and you must enable file and printer sharing on the desktop. The laptop and the desktop should be in the same workgroup. Some firewalls will cause this problem. Start with the network setup wizard in Settings/Network.
First uninstall the netgear adapter from the memory of the computer completely...
Because in case of this netgear adapter WG111 ... when u install it , it makes changes in the system files ...
That;s why when u connect the printer it doesnot recognise that ...
that's why uninstall the netgear adapter software in the Add remove programs and then restart your computer..
the only thing that connects the printer to the internet fault is the fact that the printer and your belkin are both usb connected.
If you are using a laptop then it could be a usb power problem and the motherboard is disconnecting the belkin adapter for some reason, the only one i can think of is a power problem.
The same can apply to a desktop pc if there is a usb problem
Firsly i assume you are using the belkin software to connect the usb adapter to the router, so on your taskbar on the right there is normally the little aerial type icon for the belkin adapter and a little pc screen showing the connection also, if you right click on one of theses icons you should get a line reading 'enable windows WZC', if you do get the option enable it and try using the windows connection software instead of the belkin as it may stop the disconnecting.
Also ensure that when you installed the software to your printer your firewall and antivirus was dissabled as certain elements to the driver may not have been installed.
Lasly, try using different usb ports if you have spare ones, with both the printer and the adapter as sometimes the chip on the board may be instructing the usb ports incorrectly as to which is required first, as windows asks for certain things eg input/output ports to be used first,in other words the IRQ (interupt request) may be causing the problem.