Question about Sony Cyber-shot DSC-S700 Digital Camera
The LCD screen doesn't display anything but weird lines on a black screen and I can't take pictures with the camera. Sony DSC-P92
DSC-S700 When you turn it on the green power light is on, but the screen is black you could bearly see the menu screen as if there was no light or the contrast was diminished.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
The display being white can be due to failure
of the LCD or the CCD which is the optical sensor of the camera. So to confirm
check the older picture to be seen on the display. Confirm this by checking the
card on your PC. If the images/picture is seen to be of good quality, then the
LCD can be faulty, fault on the linking cable or the control board.
However if the older images are seen well
then the LCD is working correctly and the fault can be failure of the CCD-
charge coupled device in the camera. If you have accidently exposed the camera
directly to high intensity light / sunlight, then it is possible that it is
damaged. Remove the battery and keep the camera aside to reset and try as a
last resort. Get estimate before you decide. It will be good to have it checked
at the authorised service as you do not have to run around for spares.
Please click on the link for tips to replace
Dec 14, 2011 | Nikon COOLPIX L20 Digital Camera
Dec 18, 2009 | Canon PowerShot SD1100 IS Digital Camera
Jul 31, 2008 | HP Photosmart R607 Digital Camera
Nov 25, 2007 | Nikon Coolpix 5700 Digital Camera
Aug 30, 2005 | Pentax Optio 330GS Digital Camera
154 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: