I bought this TV second-hand and would like to program it to work with my ATT U-Verse remote control, but they only have one code listed, 1259, which doesn't work. Does anyone know of an alternate code to make it work?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
0328,0312,0376,0000. Check these codes. If
you wish to get more details, check the sites linked here. Setup code list, and setup procedure to many
popular brand remote controls are given.http://electrohelponline.blogspot.com/http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic
/ Time slide, can be selected by the drop-down list, at the top left
of the display window, will make surf easy.
You will need to set the U-verse remote to Channel Control Depending on Device Selected.
1. Press and hold the AT&T key on the remote control 2. While holding the AT&T mode key, press the OK key 3. Release both the AT&T key and the OK key - All the mode keys will flash twice indicating programming mode 4. Enter 966 by pressing the number keys on the remote control - The AT&T key will flash twice indicating correct entry 5. Press the Enter key - The AT&T key will flash three times indicating successful assignment and return to normal operations. If you press any key other than the mode keys or ENTER, the AT&T key will give a long red flash and the remote control will return to normal operation. Should the remote control time-out before you complete the procedure you will need to start over.
Then set the remote to TV and press the orange "On Demand" button.
This process should be used if the code for the device is not listed in the Manufacturer Code List.
Turn on the device you wish to program.
Point the remote control at the device.
Press and hold the Mode key (TV, DVD or AUX) you want to program. Without releasing the selected Mode key, press and hold the OK key simultaneously
Release both the Mode key and the OK key at the same time. All the Mode keys will flash twice indicating programming mode.
Enter code 922 by pressing the number keys on the remote control. The selected Mode key will flash twice indicating correct entry. Note: This next step is For AUX Searching only, press and release the PLAY key then press:
1 for VCR
2 for Receiver/Tuner
3 for Amplifier
4 for Home Theater In The Box (HTIB)
All the Mode keys will flash twice indicating correct entry.
For AUX only, press and hold the PLAY key and wait until the device turns off, then release the PLAY key.
The REW key can be utilized to go back through the codes one at a time.
The FF key can be utilized to move forward through to codes one at a time.
Press the PLAY key to resume auto search of device codes.
To save the code, press the ENTER key on the remote control (bottom right) or press the EXIT key to return to normal operation. The selected Mode key will flash three times and return to normal operation.
If no valid code is found, the red light will flash two times and the remote control will return to normal operation.
Turn the device back on using the remote control. If this doesn’t work start over or try Manual
Press the appropriate Mode key on the remote control to work with the selected device. To use the remote control for the AT&T U-verse TV Receiver, press the AT&T Mode key.
the only remote I found that works all the features on ilo is the GE universal remote #24914. The code is in the book that comes with the remote. I use this remote myself. This remote can be bought at Target for under $10.Hope this helps you.
Yes there is, at&t techs have issues with philips/magnavox. When you are programming these tv's, you will notice if u get the right code on this particular brand, the light on the tv will blink but not turn on. This is the correct code but, the simultaneous action wont work, you'll have to hit tv first by itself and then hit power. Don't know why, but it is what it is.