I had a mooto q and it was paired to my h700 headset....however.. my moto q broke n the screen went blank and i was sent a replacement phone............i have tried to pair the h700 with my new phone and it will now work....how can i get it to work
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To pair your Moto with your PS3, flip open the headset and hold the button down on the earpiece until it turns purple. Then have the PS3 scan for new devices. You'll be prompted to enter a password (which is either 0000 or 1234 by default). Once paired successfully, you should never have to pair it again if you don't use it with any other devices, such as your phone. for more information, go to http://community.us.playstation.com/thread/2344930?start=0&tstart=0
Had the same problem and tried all solutions offered on the internet. Mute is off, wire's are not broke, mic is not obstructed.... Called Motorola and they are sending a replacement since the unit is less than one year old. They are sending me the H780 model since the H715 is out of stock. Call 800-331-6456. If you say "agent" you will bypass all the voice prompts.
1.Ensure the headset is turned off (indicator light not blinking and headset boom is closed) 2.Press and hold the Call button. After about 4 or 5 seconds, the indicator light becomes steadily lit in magenta 3.Release the Call button and immediately open the headset boom. The indicator light remains lit in magenta.
If the indicator light is flashing in blue or not steadily lit when opening the headset boom, repeat steps 1 through 3
Steps to pair a H700 headset with any bleutooth pone:
Make sure the H700 fully chared (very important)!!
Make sure the microphone boom is folded closed, i.e. power is off!
Hold the call button for 1-5 seconds until the light is steady lit purple
Flip out the microphone boom, the light should stay lit purple!
Now you are ready to pair the headset with your phone, so follow the pairing instructions of your phone.
Note: When prompted for the Passkey; it is most likely 0000 but the correct Passkey should be on the headset accessory instructions.
I must add that indeed my headset on occation (once or twice every three months) also loses its connection with the blackberry (a 8703e) . At which time I have to remove the headset from my phone bluetooth device list, and start the above described steps to pair my headset with the phone again.