Question about Lexmark JetPrinter X1185 All-In-One InkJet

1 Answer

Ink install which side does the black cartridge go

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 377 Answers

Left side.

Posted on Mar 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I print from the internet my copy prints my color comes out a different color I think it might be my black ink is off I have a dell 946 all-in-one printer.


Are you using Dell Series 5 ink cartridges?

Can you copy a document under the glass? Black & White and color? Do they look ok?

If you unplug the printer from the wall and remove the power brick for 60 seconds, this will reset any error messages the printer has. I would then plug everything back in.

Power on the printer.

Open the printer(with the power on) and take out the Dell Series 5 black cartridge and then reseat it. I would then take out the color Dell Series 5 ink cartridge and reseat it. Now close the printer and it will print an alignment page.

Any error messages?

black cartridge = black side(left side) color cartridge = color side(right side)

photo cartridge = black side(left side) color cartridge = color side(right side)

Dell Series 5 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges .

Dell Series 5 ink cartridges can be purchased at Staples, Walmart or Dell's Website.

It's possible to get a Dell Series 5 ink cartridge with a bad sensor. I would that these back to the place of purchase for a replacement or a refund.


Rick

Jul 27, 2011 | Dell 946 All-In-One InkJet Printer

1 Answer

I keep getting a cartridge error message. I have replace the ink cartridges but still have the error.


Are you using Dell Series 11 ink cartridges?

Open the printer with the power on and remove the Dell Series 11 black ink cartridge and make sure the tape is off the cartridge, then reseat the cartridge back in. Now do the same for the Dell Series 11 color cartridge. Now when you close the printer, it should print an alignment page. Any error messages?

Black = Black side(left side) Color = Color side(right side)

Photo = Black side(left side) Color = Color side(right side)

Dell Series 11 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges.

Dell Series 11 ink cartridges can be purchased at Staples, Walmart or Dell's Website.

It possible to get a Dell Series 11 Cartridge with a bad sensor. Take back to place of purchase for a replacement.


Rick

Jun 15, 2011 | Dell 948 All-In-One InkJet Printer

1 Answer

It keeps printing alignment over and over


Sounds like a bad sensor in the Dell Series 9 ink cartridge.

You are using Dell Series 9 ink cartridges, correct?

Unplug the printer from the wall. Now remove the power brick from the back of the printer for 60 seconds. Plug everything back in. This will reset any error messages the printer has.

Power on the printer. Open the printer and take out the Dell Series 9 Black cartridge. make sure all the tape is off the cartridge and put the cartridge back in. Now do the same for the Dell Series 9 color cartridge.

You are using Dell Series 9 ink cartridges, correct?

Dell Series 9 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges.

Dell Series 9 ink cartridges can be purchased at Staples, Walmart or Dell's Website.

Black cartridge = black side(left side) Color cartridge = color side(right side)

Photo cartridge = black side(left side) Color cartridge = color side(right side)

It is possible to get a Dell Series 9 cartridge with a bad sensor. Contact the place of purchase for a replacement.


Rick

Jun 11, 2011 | Dell 926 All-In-One InkJet Printer

1 Answer

I am getting the following error message: Black/photo cartridge missing


Unplug the printer from the wall. Now remove the power brick from the back of the printer for 60 seconds. Plug everything back in. This will reset any error messages the printer has.

Power on the printer. Open the printer and take out the Dell Series 5 Black cartridge. make sure all the tape is off the cartridge and put the cartridge back in. Now do the same for the Dell Series 5 color cartridge.

Close the printer. It should print an alignment page. Any error messages?

Black cartridge = black side(left side) color cartridge = color side(right side)

Photo cartridge = black side(left side) color cartridge = color side(right side)

Dell Series 5 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges.

Dell Series 5 ink cartridges can be purchased at Staples, Walmart or Dell's Website.

If these ink cartridges are new, then take them to the place of purchase for a refund or replacements. If they're old, then try purchasing a new Dell Series 5 ink cartridge.


Rick

Mar 06, 2011 | Dell 924 All-in-One InkJet Printer

1 Answer

Refilled ink catridges and printer still shows that the ink is low


If you unplug the printer from the wall and remove the power brick for 60 seconds, this will reset any error messages the printer has. I would then plug everything back in.

Power on the printer.

Open the printer(with the power on) and take out the Dell Series 5 black cartridge and then reseat it. I would then take out the color Dell Series 5 ink cartridge and reseat it. Now close the printer and it will print an alignment page.

Any error messages?

black cartridge = black side(left side) color cartridge = color side(right side)

photo cartridge = black side(left side) color cartridge = color side(right side)

Dell Series 5 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges.

Dell Series 5 ink cartridges can be purchased at Staples, Walmart or Dell's Website.

It's possible to get a Dell Series 5 ink cartridge with a bad sensor. I would that these back to the place of purchase for a replacement or a refund.


Rick

Mar 04, 2011 | Dell Photo 964 All-In-One InkJet Printer

1 Answer

Ink


  1. Buy only genuine Dell replacement cartridges. Dell states their printer cartridges cannot be refilled with ink and that only their cartridges work in the printer.
  2. Bring the cartridge carrier of the printer to the center so you can access the ink cartridges. Open the cover of the printer and the carrier slides to the center. Make sure the printer is turned on.
  3. Remove the old black ink cartridge to use the color cartridge. If you allow the old black cartridge to remain in the printer, you will get error messages that the ink is low. The printer may also keep reverting back to the black ink as the default color when printing.
  4. Open the package of the new color cartridge carefully. Remove any blue packing tape that's on the ink cartridge. Take care not to touch the gold area or you could damage the cartridge. Insert the new color cartridge into the correct slot in the printer, the right side of the cartridge carrier. The ink cartridges aren't interchangeable; they need to be placed in the correct slot.
  5. Close the cover on your printer after installing the color cartridge. Run a print test to make sure the color cartridge is installed correctly. Use the Dell Ink Management System to monitor your printer and all-in-one functions. Thanks Thiru

Jun 15, 2009 | Dell 810 All-In-One InkJet Printer

1 Answer

I just installed a Lexmark 2500. It came with an ink cartridge (color) I purchased a black cartridge and installed it but it does not seem to be working. How do you darken the ink on this printer. It seems...


Maybe you can try to rest the black ink level 1st. To reset the ink level:
1) Goto the Lexmark Solution Center application.
2) Press button Maintenance>Install a new print cartridge, follow the instruction on screen. U may then have your new full ink level. Note: u only can reset to full level, cannot customize the level by your own.
Hope this help.

YBC (/\)

Jan 14, 2009 | Lexmark X2500 All-In-One Printer

1 Answer

924 says that black ink cartridge not installed


Hmmm....that sounds to be an issue with the ink cartridges...

You might be using ink cartridges purchased other than Dell or Staples...since these are the two who sell Dell Ink.

If thats not true, then take out both the cartridges in the printer.

Lets isolate the issue

1. Try only Black cartridge on Color slot(right). If you get Install both ink cartridges error, then its an issue with the Black ink cartridges and if you get message that install Black ink cartridge then its an issue with the prrinter.

2. Now install only color cartridge on Black cartridges slot(left), If you get color cartridge missing then its an issue with the Black cartridges which you are using and if you get install both ink cartridges then its an issue with the black slot on printer.

3. If issue found to be with Black ink cartridge then wipe the Nozzles(bottom) of the ink cartridge with lint free cotton cloth from back to front 5-6 times.

4. Also try replacing the ink cartridges purchased only from Dell or from Staples. Purchased from somewhere else or refilled might not work.

5. If issue found to be with printer, then i would suggest you to purchase new printer then.

Hope this fix the issue

Aug 14, 2008 | Dell 924 All-in-One InkJet Printer

1 Answer

Black ink full won't print on pages


Here is resource page and "No cartridge " error info:
http://welcome.solutions.brother.com/bsc/public/us/us/en/faq/faq_top.html?reg=us&c=us&lang=en&prod=dcp110c_us

Why does my machine's LCD show "NO CARTRIDGE" even though I have already installed all the ink cartridges?
Description:
If the message "NO CARTRIDGE" remains on the LCD after you have installed the ink cartridges, then one or more of the cartridges may not be properly installed. Verify that the cartridges are installed correctly by following these steps:


Note
    Cartridges that have already been installed are no longer vacuum-sealed, so it is very important that these cartridges remain upright. If a cartridge is removed from the machine and placed on its side, air may be introduced into the ink supply tubes. As a result, repeated cleaning will likely be required before normal print quality is restored.

  1. Unplug the machine from the AC power outlet, wait approximately 10 seconds and then plug it back in.
    If the date and time appear on the display, the issue is resolved. If the display continues to show NO CARTRIDGE, continues to Step 2.

  2. Open the scanner cover by lifting it from the right-hand side until it locks securely into the open position.

  3. Remove the black ink cartridge by pulling the white plastic hook (locked over the edge of the ink cartridge) toward you, then lifting the cartridge out.

  4. The LCD should prompt you to install the black ink cartridge.

  5. Reinstall the black cartridge. Press down FIRMLY on the top of the cartridge until it is fully seated. Push the white plastic hook towards the cartridge to verify it is fully latched over the cartridge's top edge. Repeat STEPS 2 - 4 to verify each that of the color cartridges (magenta, cyan and yellow) is installed properly, then continue to STEP.

  6. Close the scanner cover. The unit should begin cleaning automatically.
  7. Good luck, Joe
  8. Please remember to rate all Techs who assist you for free :)

Jul 31, 2008 | Brother DCP-110C All-In-One InkJet Printer

1 Answer

PRINTER WON'T ACCEPT NEW INK CARTRIDGE


From the Brother solutions website:

If the message "NO CARTRIDGE" remains on the LCD after you have installed the ink cartridges, then one or more of the cartridges may not be properly installed. Verify that the cartridges are installed correctly by following these steps:


Note
    Cartridges that have already been installed are no longer vacuum-sealed, so it is very important that these cartridges remain upright. If a cartridge is removed from the machine and placed on its side, air may be introduced into the ink supply tubes. As a result, repeated cleaning will likely be required before normal print quality is restored.

  1. Unplug the machine from the AC power outlet, wait approximately 10 seconds and then plug it back in.
    If the date and time appear on the display, the issue is resolved. If the display continues to show NO CARTRIDGE, continues to Step 2.

  2. Open the scanner cover by lifting it from the right-hand side until it locks securely into the open position.

  3. Remove the black ink cartridge by pulling the white plastic hook (locked over the edge of the ink cartridge) toward you, then lifting the cartridge out.

  4. The LCD should prompt you to install the black ink cartridge.

  5. Reinstall the black cartridge. Press down FIRMLY on the top of the cartridge until it is fully seated. Push the white plastic hook towards the cartridge to verify it is fully latched over the cartridge's top edge. Repeat STEPS 2 - 4 to verify each that of the color cartridges (magenta, cyan and yellow) is installed properly, then continue to STEP.

  6. Close the scanner cover. The unit should begin cleaning automatically.

Dec 09, 2007 | Brother MFC 210C All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark JetPrinter X1185 All-In-One InkJet Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...