Car starts i can put it in drive fell the tranny ingage but wheels wont move even when in nutraul but if i rock car back and forth i hear a click and it drives but if i park then put gear shift in park back to no movement from wheels
Re: Car starts i can put it in drive fell the tranny...
Hi,check your transmision fluit level.I think the level is low .start the car ( car on level surface) put it in drive,parking brake set and check your trans fluit level.
good luck!!!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may have a axle bearing going out. You should jack the truck up and rock the wheel from top to bottom and see how much play is there and there should not be any rock. You could or should compare the rock from one side to the other side as a comparison. Just be aware you can get noise that travels along the frame in some cases and it is hard to determine just where it is coming from.
Your brakes are probably rusted up. From sitting and not moving the inside of your brake drum has a lip rusted around the brake shoe. If you get an some solid dry pavement lightly rock the car back and forth from drive to reverse. This should free up the wheel. If it does not then you will need to get the wheel and drum off and see what is the problem in there.
Could in fact be the coupling in the column or something in the gear box. Might be a ball joint or tie rod end which can be tough to check off the ground.
you have the sign of teeth missing off the flywheel, if it spins when you try cranking it over then thats your problem. Could be safety netural switch but rocking it back and forth should not make a difference.
hi, can you hear a clicking noise when you turn the key to start as the starter gets its power direct from the battery so also check these wires are connected and not came loose. If you can hear a clicking noise when you turn the key this means the starter motor needs replacing ok. Let me know how you get on or if you need further assistance ok
Try having someone rock the car frontwards and backwards, while you rock the steering wheel back and forth and try to turn the key - it sounds like you're jammed up hard against the steering column lock.
×