Question about FMI Portable Webcam

2 Answers

Looking or vega usb 2.0 camera driver

I had an installer for my new webcam. The problem is I installed the setup disk after that it says no driver. I check the device manager it says not installed driver for vega usb 2.0 camera. Please help......

Posted by on

  • 7 more comments 
  • Anonymous May 05, 2008

    i wna to get the driver for vega pc camera free of cost

  • Anonymous May 27, 2008

    i've got the same problem...



  • Anonymous Jun 19, 2008

    need the driver for vega usb 2 camera for my latop as i have installed the disk and it isn't working please help?

  • Anonymous Aug 15, 2008

    yes have same problem

  • Anonymous Dec 17, 2008

    yes i too have the same problem pls help

  • Anonymous Dec 24, 2008

    yes, i'm problems in Yahoo messenger

  • mercury mendoza Mar 11, 2009





    i can install my usb camera because my computer does not match with my computer.



  • Anonymous Apr 28, 2009

    do you have driver of vega usb 2.0 camera...

  • Sergio Scalfaro
    Sergio Scalfaro May 11, 2010

    is a nortek webcam?
    Sergio

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have Vega Pc Web Cam But I have Not their driver cd please help me

Posted on Apr 16, 2011

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I've got a webcam, all over branded as A4TECH "PK-30MJ"
but listed as "Vega USB 2.0 Camera" in the devices

http://a4tech.com/ennew/driver/CameraJ.zip recommended as optional drivers to use interpolated @800x600 video, doesn't

Posted on Sep 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

USB PC CAMERA AVC0401AP


1st You download Webcam Driver.
USB PC CAMERA AVC0401AP
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Dec 26, 2012 | Genius VideoCAM Eye Web Camera

1 Answer

I have the camera but don't know how to install it...what do I need to do? I think it is the ice2 model.


Plug you camera, wait for a few seconds your operating system will detect the new device and will ask for the drivers, then insert your driver installation disk and look for setup if it doesnt automatically start the installation process. After installation your camera should work just fine. hope that helps.

Sep 07, 2011 | Macally IceCam Personal Web Camera

2 Answers

How to install


put usb cable in place, put driver disk into dvd or cd rom, wait for autorun and install driver and software , or from my computer open your disk and click on setup

Jun 05, 2011 | A4tech PK-635 Webcam

3 Answers

How do i hook up a web camera


Basically. You plug in the USB cable. Install the proper drivers. And use the software you want, to use that camera.

Sep 02, 2009 | Webcams

2 Answers

I lost my zebronic webcams cd also dont know model num


Copy this site and paste it in your browser address

http://www.zebronics.net/downloads.asp

And then go to the Web Cam Model Number you have and select the windows
Operating system you have and download.
Instructions:
If your not sure you can look at the webcams and see which one looks like yours before downloading at this site http://www.zebronics.net/webcameras.asp Then go back and download the driver.
Then to install follow these instructions:
Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web, do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:
1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:
Go to this site http://download.live.com/?sku=messenger and download Windows Live Messenger.
1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Jul 15, 2009 | Ezonics CobraCam Webcam

1 Answer

Not getting m6512 webcam drivers


UNPLUG your camera from the USB port, first.
If you have your installation disk that came with the camera, completely uninstall the drivers (in add and remove programs in control panel). Reinstall the original drivers from your installation disk and when instructed, plug the camera back into the USB port. Most USB devices require that you FIRST install the drivers and THEN plug in your device. If this does not work, try downloading new drivers from the manufacturers website and use those, or Google yawcam (yet another webcam) and use that program and drivers. It is a generic program and drivers that I have used in the past after I bought a cheap webcam off eBay that didn't have drivers that worked and no controls for the camera. If any of this is helpful, please rate it as helpful. Good luck.

Jul 01, 2009 | Webcams

2 Answers

I SWITCH USB IN MY PC BUT NOT INSTALLED WEB CAM DRIVER


Normal 0 Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work. Then to use it on the Web, do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:
  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
Hope this helps. Bud




Mar 17, 2009 | Logitech Webcam

3 Answers

Vega usb 2.0 camera just brought this item but no setup disk was sold with item


my vega USB2.0 camera doisnt work it need software

Feb 26, 2008 | Webcams

2 Answers

Help me


1:)Do you have installed driver?
2)The green light on webcam working???

Nov 01, 2007 | Radio Shack VGA PC Camera Webcam

Not finding what you are looking for?
Webcams Logo

Related Topics:

12,668 people viewed this question

Ask a Question

Usually answered in minutes!

Top FMI Webcams Experts

Florin

Level 3 Expert

733 Answers

Tony

Level 3 Expert

2598 Answers

Barbat Nae
Barbat Nae

Level 3 Expert

508 Answers

Are you a FMI Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...