Question about Konica Minolta magicolor 2300DL Laser Printer

2 Answers

Bad color print out

Hello,
the printout of my minolta 2300DL is very bad. The blues look purple, the white in a picture has blue in it the red is somewhat faded.
Pleae help, thank you

Posted by on

2 Answers

Colour laser. Load an ICC profile like srgb for printer and use same in your image program. Tweak as req in image program to get best print output. In printing preferences use following quality settings. images=Perceptual Graphics=Saturation Text=Saturation

Posted on Jun 06, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

U first check the ink level on the catridges,mostly inks are too low

ink is ok -u use printer utilities like headclean

Posted on Mar 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bizhub c200 printing with streaks of red and blue lines what to do


If that lines are consistent with the red and blue and it does not appear during black and white print that means the cleaning blade in the affected color units need to be replaced

May 16, 2014 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

Printing printing purple instead of blue


registration error which mean the colors are not laying on top of each other, in this case magenta (red) and Cyan (blue) giving you purple, need to have a tech come out and run regisrtation procedures

Feb 16, 2014 | Konica Minolta bizhub Printers & Copiers

1 Answer

Yellow is missing in printouts, and the color is heavily purple, even after putting in new red cartridge and doing a deep clean


Yellow cartridge is clogged or bad. If yellow is not being out put then it will throw the other colors off. You could print a yellow, light blue, magenta (pinkish) , and black squares using MS paint or other paint program. This will narrow down which cartridge has a problem.

May 14, 2010 | Canon PIXMA MX850 Multifunction Printer

1 Answer

Our 2300DL is leaving streaks when printing


Out of one or more toners. If you have removed and replaced a cartridge in error the % remaining is reset to 100%. Try to determine which color is missing in your print out (usually black), and then follow menu instructions to replace that cartridge. The ends are color coded so be sure you change the correct one. This will insure the remaining cartridges % remaining is correct.

Jan 13, 2010 | Konica Minolta magicolor 2300DL Laser...

1 Answer

I have run out of one of the color red. Can I


My printer is printing very light........color ink cartridge is new for color but, black is getting low........what should I do.........do I have to replace black before its gone?

Oct 25, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

The output does not much with the color on the screen


This sounds like a board level issue and will need the manufacturer to get nvolved. I would contact the place you purchased it from and tell them it is not funcitoning as per specifications. They will either refund you , swap it over or send it off to for repairs. Check your warranty details as most of these types of printers have replacement warranties.
All the best!

John

May 25, 2009 | HP DeskJet D2560 InkJet Printer

1 Answer

My printer prints photos with a blue tinge to it.


Go ahead and get another toner
also run the printer cleaner a couple times

Feb 18, 2009 | Konica Minolta magicolor 2300DL Laser...

3 Answers

Xerox Phaser 8500 color issue


In all honesty, I suspect the print head has some bad jets on it.
Xerox will not warrany it since there is the presence of non xerox ink in the print head.
When you have tried as much as you have with the maintenance cycles. I would suspect a bad printhead.
When the jets become blocked to the point where you cant get all the colors sprayed onto the drum, you get mismatched colors.

Apr 07, 2008 | Xerox Phaser 8500/DN Printer

4 Answers

Quit Printing & Loud annoying sound


The sound is coming from the new toner cartridges. The roller is sticking and causing the gears to make that noise. I removed the toner cartridge and manually turned the roller until it turned smoothly. (this a little hard but it worked). no more noise!

Dec 09, 2007 | Konica Minolta magicolor 2300DL Laser...

Not finding what you are looking for?
Konica Minolta magicolor 2300DL Laser Printer Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...