Question about Ricoh Aficio 450 Copier

1 Answer

UF Error code-Gestetner 2412Z

Copier displaying error code: UF. What does it mean and how to fix or clear it? Thank you so much.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

You may find it easier to solve the problem by asking the same question under its original manufacturer model........Mita DC1257

Good luck

Posted on Mar 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SC 282 error


ricoh aficio 2400 add tona displayed.new cartridge fixed shaked very well tona tube rotate freely(inside) but still add tona appears how can i erase it. pl help

Oct 23, 2013 | Gestetner DSc424 Color Copier

1 Answer

Ricoh Aficio SP 4210N- Code SC 543


This is a common error code for Ricoh copiers, Savin and Gestetner copiers that need service. Recently Ricoh has purchased Lanier and now is naming all their new machines Lanier instead of Gestetner, Savin and Ricoh. However, the copier service error codes have remained he same.
When you get this copier printer service code it means the fuser or fixing assembly (same part) has thermistor problem. The copier fuser's thermistors help regulate the temperature of the fuser assembly. The fuser assembly on all copiers including Canon, Kyocera, Ricoh, Sharp and other brands is the part that melts the toner onto the page.
Getting back to the repairing the copier on Ricoh, Savin, Lanier and Gestetner models that have the fuser or fixing code error. The majority of the time the fusers' thermistors (Middle and read) need to be replaced. Just cleaning them will not solve the copier repair service code.
It is usually, depending upon the machine, its a 1 to 2 hour copier repair job because the copier repair service technician will need to dissemble the fuser, insert the two new thermistors, re-assemble, reset the error code and test the copier machine repair. Also, ask the copier technicians to to do a copier cleaning maintenance while on site.

Aug 18, 2011 | Ricoh SP 4210N Laser Printer

4 Answers

Gestetner 2822 error code e-5


i got a strait black thin line on left marging of paper. i think margin setting of my Gestetner 2822 has been changed. but i don't know how to fix this problem. (107-C, ???)

Nov 11, 2009 | Gestetner DSm645 Digital Imaging System

2 Answers

I have gestetner 2722ztd copier when i replace the explosure lap the copier dispalys error code e1 on the screen .how i clean/remove the error massege ? please help me


Please check after replace the continuity the expo lamp,expo thermofuse.The E codes are displayed in the copy counter.To display both digits of the E codes press the enter key.
E 11 - Exposure lamp error.Possible cause: expo lamp open,expo thermofuse open,power supply defective,main board defective.
E 12 - Exposure lamp error.Posible cause:AC drive board defective,main board defective.
E 13 =Zero cross signal error.Possible cause:main board,power supply defective,zero cross line open or the conector on the main board is not conected correctly.
For reset turn ON/OFF the main switch unplugged wait 10sec and turn ON or:turn ON the main switch,turn DIP switch 101-1 ON/OFF and turn the main switch OFF/ON.The DIP switch is located in the rear parts into the main board.

Sep 20, 2009 | Gestetner Printers & Copiers

1 Answer

We have a gestetner DSm622sp we are getting an error code SC320.


Hello sir; the error code you have display, that's means laser motor don't work, replace it!

May 18, 2009 | Gestetner DSm515pfd Digital Copier -...

3 Answers

Gestetner-2412Z copier-error code UF


UF is a panasonic code,the u means user fix.If you have an users guide it will tell u what to do.

Mar 03, 2008 | Gestetner DSm515pfd Digital Copier -...

1 Answer

ERROR UF-


I can help you, but what kind of copier is it? What make and model?

Mar 02, 2008 | Printers & Copiers

1 Answer

Gestetner-2412Z copier-error code UF


The large tray on the right is where the jam is. Slide the lever to the right and disconnect it from the machine. Open the cover as if you where filling it with paper. Look inside for and half sheets of paper, or possibly misloaded paper. If everything is ok, the front cover by the lever needs to come off. There are 2 screws on the bottom of the cover. Take the cover off, and then take the upper cover off. Underneath it is a switch. See if there is a piece of paper wedged in it. If so, remove it. Replace covers. If that does not solve the problem, then it probably needs feed rollers. You might be able to clean them with soap and water, but it will jam again in time.

Mar 01, 2008 | Ricoh Aficio 450 Copier

1 Answer

Error Code: UF


failure of data transfer between boards.-or defective of backup battery.cofirm good connector pluging and good soldering points in boads.

Feb 29, 2008 | Printers & Copiers

Not finding what you are looking for?
Ricoh Aficio 450 Copier Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Printers & Copiers Experts

quennie732

Level 2 Expert

393 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

181 Answers

Are you a Ricoh Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...