Question about Shuttle MV43N Motherboard

1 Answer

Shuttle mv43n v3.1

Hello there. i would greatly appreciate your assistance on this one. error message (bootmgr) missing when trying to install win xp on 2 different, formated Hdrives. cannot boot from cd-rom, i can enter setup. manually reset cmos and nothing. I put in a hard drive with win xp already installed on it, tried to boot from the disk and got a windows error (0x0000007b) [hd failure], but hd is good. so could be a host adapter (scsi controller)problem, or chipset problem, or hd mini-port driver.
thank you very much for your attention. Aaron

Posted by on

  • aa-ron Mar 02, 2008

    i feared that. thanx a million chimpster. its a salvaged comp. but with otherwise nice parts. got any ideas where i can get cheap mobo's. you helped me alot appreciate it

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 147 Answers

The problem is your motherboard itself. There is a short somewhere in it and is wreaking havoc on your attempts to get a system running.

I recommend getting your board exchanged if you're under warranty.

Please let me know if this helps. Good luck!

Posted on Mar 01, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell bootmgr is missing


Most likely cause is that the boot order in the BIOS is set up for the HDD first. When turning on the unit, press the key needed to enter setup. Once in setup, search thru the menus for the boot order. Choose the CD drive as the first boot device, then the hard drive as second. Save and exit the setup. When rebooting, ensure the WIN XP CD is in the drive. When the screen says, "press any key to boot from CD", press a key and the WIN XO CD should take over and start the install. Once WIN XP starts installing, follow directions. On each restart after that, DO NOT press the key to boot from CD. WIN XP setup will handle everything until the reinstall is complete. After you are done, you may choose to go back to setup and change the boot order back, but it is not really necessary. The only time you will get the "press and key to boot from CD" message is when there is a bootable CD/DVD installed in the drive. Otherwise, it overlooks it and goes to the next boot device (HDD).

Sep 07, 2014 | Dell Inspiron 2600 Notebook

1 Answer

Shuttle MV43v Motherboard free download


Hello the drivers can be downloaded here:

http://www.shuttle.eu/_archive/older/en/mv43_faq.htm#download

Scrool to the bottom of the page, and download the drivers.

The files needs to be unziped, before you install.

Please install the 4 in 1 chipset driver first, and reboot.

Good luck

Jan 30, 2013 | Shuttle MV43N Motherboard

1 Answer

Enhanced audio controler


Hello you can download the drivers needed here:

http://www.shuttle.eu/_archive/older/en/mv43n_faq.htm#download

Scrool to the bottom of the page and click on the soundriver for download.

Here is the drivers for windows xp, and the drivers will probably not fit vista or windows 7.

Good luck

Jan 07, 2013 | Shuttle MV43N Motherboard

1 Answer

Dell Dimension 4550 BOOTMGR is missing error message


To repair missing orcorrupted system file/s, boot up with the Windows installation CD then -Press R to repair wheninstructed.Press 1 or Enter to repairthe C:\Windows folder.Then type chkdsk /r and then press Enter.The repair process willtake quite a long time.

Jul 09, 2012 | Dell Dimension 4550 PC Desktop

1 Answer

Dell dimension 4550 Bootmgr missing error message


you would have to removed the hard drive and possibly buy the external adaptor for your hard drive then plug it in to another computer via USB and reformat the hard drive..

Jul 09, 2012 | Dell Computers & Internet

1 Answer

How can i boot my Windows Seven OS if the "bootmgr is missing"? I'm installing windows seven but when windows start copying files but error message appears that required files for the...


What you need is bootable DVD/CD for installing or repairing Windows 7 to get missing 'bootmgr' or repair corrupted bootmgr...If there are files corrupt on your CD, you can get new one from shop you have purchased..Maybe just need to clean up your DVD/CD, so your DVD drives can read properly the files installation..

Aug 07, 2011 | Computers & Internet

4 Answers

Bootmgr missing


Causes of BOOTMGR ErrorsThere are a number of possible causes for BOOTMGR errors, including the most common "BOOTMGR is missing" error message.

The most common reasons for BOOTMGR errors include corrupt and misconfigured files, hard drive and operating system upgrade issues, corrupt hard drive sectors, an outdated BIOS, and damaged or loose IDE cables.

Another reason you might see BOOTMGR errors is if your PC is trying to boot from a hard drive or flash drive that is not properly configured to be booted from. In other words, it's trying to boot from a non-bootable source. This also would apply to media on an optical drive or floppy drive that you're trying to boot from. Fixes for BOOTMGR Errors
  1. Restart the PC. The BOOTMGR error could be a fluke.

  2. Perform a startup repair of Windows. This type of installation should replace any missing or corrupt files, including BOOTMGR. Continue troubleshooting if this does not resolve the issue.

  3. Check your floppy and optical drives for media. Often times, the "BOOTMGR is Missing" error will appear if your PC is trying to boot to a non-bootable floppy disk or CD/DVD.

    Note: If you find that this is the cause of your issue and it's happening regularly, you might want to consider changing the boot order in BIOS so the hard drive is listed as the first boot device.

  4. Check the hard drive and other drive settings in BIOS and ensure they are correct. The BIOS configuration tells the computer how to use a drive so incorrect settings can cause problems, including BOOTMGR errors.

    Note: There's usually an Auto setting in BIOS for hard disk and optical drive configurations which is usually a safe bet if you're not sure what to do.

  5. Reseat all internal data and power cables. BOOTMGR error messages could be caused by loose or malfunctioning power or controller cables.

    Try replacing the PATA or SATA cable if you suspect it might be faulty.

  6. Update your motherboard's BIOS. An outdated BIOS version can sometimes cause the "BOOTMGR is Missing" error.

  7. Perform a clean installation of Windows. This type of installation will completely remove Windows from your PC and install it again from scratch. While this will almost certainly resolve any BOOTMGR errors, it's a time consuming process due to the fact that all of your data must be backed up and then later restored.

    If you can't gain access to your files to back them up, understand that you will lose them all if you continue with a clean installation of Windows.

  8. Replace the hard drive and then perform a new installation of Windows. If all else has failed, including the clean installation from the last step, you're most likely facing a hardware issue with your hard drive.
BOOTMGR Errors Apply To BOOTMGR issues apply to Windows 7 and Windows Vista operating systems only. Windows XP does not utilize BOOTMGR. The equivalent function in Windows XP is NTLDR


Whish you the best luck.

Mar 06, 2011 | HP Computers & Internet

2 Answers

How to fix "BOOTMGR is missing" in Windows xp


hey Mr Milebdavi try these steps
  1. Restart the PC. The BOOTMGR error could be a fluke.

  2. Perform a startup repair of Windows. This type of installation should replace any missing or corrupt files, including BOOTMGR. Continue troubleshooting if this does not resolve the issue.

  3. Check your floppy and optical drives for media. Often times, the "BOOTMGR is Missing" error will appear if your PC is trying to boot to a non-bootable floppy disk or CD/DVD.

    Note: If you find that this is the cause of your issue and it's happening regularly, you might want to consider changing the boot order in BIOS so the hard drive is listed as the first boot device.

  4. Check the hard drive and other drive settings in BIOS and ensure they are correct. The BIOS configuration tells the computer how to use a drive so incorrect settings can cause problems, including BOOTMGR errors.

    Note: There's usually an Auto setting in BIOS for hard disk and optical drive configurations which is usually a safe bet if you're not sure what to do.

  5. Reseat all internal data and power cables. BOOTMGR error messages could be caused by loose or malfunctioning power or controller cables.

    Try replacing the PATA or SATA cable if you suspect it might be faulty.

  6. Update your motherboard's BIOS. An outdated BIOS version can sometimes cause the "BOOTMGR is Missing" error.

  7. Perform a clean installation of Windows. This type of installation will completely remove Windows from your PC and install it again from scratch. While this will almost certainly resolve any BOOTMGR errors, it's a time consuming process due to the fact that all of your data must be backed up and then later restored.

    If you can't gain access to your files to back them up, understand that you will lose them all if you continue with a clean installation of Windows.

  8. Replace the hard drive and then perform a new installation of Windows. If all else has failed, including the clean installation from the last step, you're most likely facing a hardware issue with your hard drive.

Apr 23, 2010 | Microsoft Windows XP Professional

2 Answers

Bootmgr is missing


Run a Chkdsk:
Take the Windows XP disk. Boot from it, then DO NOT select F2 (automated system recovery) but continue through the procedure until you get to the point where you can choose between installing Windows XP and entering the Recovery Console. Once you get into the Recovery Console, do chkdsk and fix potential errors on your disks! Chkdsk C: /R


OR:


Perform an XP repair:
When you boot with the Win XP install CD-ROM, it loads a minimal operating system, similar to DOS, but compatible with Win XP. At the first screen you select install Win XP (not Recovery Console) and at the next screen it will find that you already have Win XP and offer to attempt a repair. This repair should not touch your Applications or data; it just reinstalls the Windows files. This is great because when it works you don't need to reinstall all your software.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 07, 2009 | Gateway MT3705 Notebook

Not finding what you are looking for?
Shuttle MV43N Motherboard Logo

Related Topics:

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Shuttle Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

David
David

Level 3 Expert

778 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Are you a Shuttle Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...