Question about Standard (CRT) Televisions

3 Answers

Philips TV sound on but picture fades to black

Philips TV. was working fine but now picture fades to black. sound is on. If we turn unit off/on picture returns...but will fade again. can fade one minute later or ten minutes later...unit id about 3.5 years old. 64 inch. (old style not flat screen)

Posted by on

  • 6 more comments 
  • Anonymous Mar 16, 2008

    TV sound on but picture fades to black problem

  • eyesmannnnn Mar 17, 2008

    Have the same problem, my TV set is a Samsung CRT 21". But the thing is it faded for a couple of times and after turning on for the third time I was able to watch without problem for about 6 hours or so. But the following day when I turned it on again, I encountered the same problem.

    Need help very badly, have no budget yet to buy another TV set.



    Many thanks!

  • DAN3521 Mar 31, 2008

    Hi I have 36"sony that picture just goes black shut tv off for few turn back on and picture works again with very good picture what might that be ?

  • Anonymous Jun 18, 2008

    My name is Mary and I am having the same problem with my 10 month to 1 year old 32" RCA XBOX Television. I turn it on and about 10 to 15 minutes later it goes completely black and ther is still sound. It also sounds like the Channels are changing while the screen is black. Please tell me what is going on. Can reach me at mary.andrus@sbcglobal.net or (409) 983-8289. Thank you for your assistance.

  • Anonymous Jul 18, 2008

    3 yr. old 15" Magnavox LCD, picture black, sound fine and remote works to the extent of changing the channels, but no picture comes up. It happened about a month ago and I just pulled the plug and check all of the cords that they were tight and plugged it back in and it worked for 2 months. Yesterday the picture is not there again. I did the same procedure, but this time it did not work. I feel that a three year old tv for $227.00 should last longer than that. If anyone could help, it would be appreciated. KLWfred

  • Anonymous Aug 15, 2008

    I have a 15" LCD Magnavox, two years old, I have sound but a black picture, remote changes channels and volume but not picture?? $270 for only two years??

  • sanbonita Aug 25, 2008

    phillips magnavox 36 inch tv sound good, but picture is out.



    p3675C

  • borrie52 Sep 13, 2008

    philips tv flat screen picture fades

×

3 Answers

I fixed this same problem by opening up the tv and just emptying a can of compressed air all over the thing to get rid of all the particles I could. Works fine now.

Posted on Sep 16, 2008

So, where are the answers?

Posted on May 03, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Philips TV. was working fine but now picture fades to black. sound is on. If we turn unit off/on picture returns...but will fade again. can fade one minute later or ten minutes later...unit id about 5 years old. 29 inch. (tube flat screen)

Posted on Sep 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Philips Magnavox 32MT3305 keeps shutting off with relay clicking. The green power light stays on but the picture and sound go out right after the orange status bar goes away. If the channel up or down...


the relay is the safety protective device..sometimes a defective component or something. maybe an overloaded power supply might caused this problem..so before any thing could gets worst..the relay will shut the unit..

Jul 18, 2011 | Philips 32MT3305 TV

1 Answer

Tik tik sund from philips tv


when i turn on my philips 20 in flat tv i have no picture, just black screen with a tik tik sound

May 11, 2010 | Philips Magnavox 27MS343S 27" TV

1 Answer

Philips Magnavox 36" @10yr old has perfect sound and black screen


checked the vedeo section of the main PCB of the unit, maybe some defective parts, try to look the back of the picture tube if theres a light, if none, cheke also the horizontal section, especially the flyback transformer

Jul 31, 2009 | Philips Magnavox TS3260C 32" TV

4 Answers

Philips 21RF vardaan there is no sound but everything works fine


just open the service manual & change the option to 1-128 ,2- 215 , 3- 065 , 4- 000 , 5- 192 , 6- 129 , 7- 112
By-Rajan

Jul 01, 2009 | Philips 32PW6506 32" TV

1 Answer

#27PT543S37A philips tv model-the tv video channel is not working


In short your tv has a problem on the AV connection, RF using coaxial cable is working okay.
get the tv to the w/shop, let him check the AV panel and AV processing IC.

Apr 30, 2009 | Philips Standard (CRT) Televisions

1 Answer

Philips 27PT6441/37


There is a install kit 483531057673 for this model when the set is dead. The kit will contain 7404 and the Horizontal Driver Transformer 5402 along with resistors that will limit stress on 7404 and includes complete instructions

May 03, 2008 | Philips 27PT6441 27" TV

1 Answer

Philips Model #27PS55S121 TV (color)


Sorry it the picture tube it's going out. I'm surprise your color didn't fade first.

Apr 16, 2008 | Philips 27PS55S 27" TV

1 Answer

Problem to turn on Philips TV


sound very much like the C.R.T is low emission the tv monitors the tube before showing a picture.either get the tube boosted or changed most tv shops should do i

Oct 18, 2007 | Philips 27PT563S 27" TV

1 Answer

Philips tv


it seems that there is a problem in your sound section. it seems that there is no proper supply to sound section or some capacitor might be faulty.

Sep 24, 2007 | Philips 32PW6506 32" TV

1 Answer

Color fades in and out of picture


The first thing I would check is the antenna or cable connection into the set. When an analog TV signal is weak, the first thing to go is the color, then the picture, then the sound. If you have another TV, connect it to the very same cable or antenna connection and see if it fails the same way, too. Make sure you just disconnect the cable end right where it goes into the failing TV and connect it to the other TV - don't disconnect the antenna cable from the wall for this check. If the second set does not fail, gently pull on the antenna wire - not too hard, you just want to put a little tension on it to see if it makes the color cut out. Reconnect the first one and try again. If it's fine now, the connection was loose. If not, it has a tuner problem that must be repaired. Also, when you look at the end of a TV connector, the center wire should stick out just a little bit, like in the attached photo. If it doesn't stick out as bit, it won't make good contact, and will result in a weak signal. I appreciate your rating if you find this helpful.

Nov 13, 2006 | Philips 27PT643R 27" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

2,228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...