Question about Patton Electric Patton PUH680-U Electric Utility Heater 1500-Watt

Open Question

Need wiring diagram

I have a 240v. space heater Model IH268 made by Patton Electric. Some wires have come loose and I do not know where to connect them.
Can you help me?
Thanks
James Rose

Posted by on

  • pneiberger May 11, 2010

    I HAVENT BEEN ABLE TO FIND ONE EITHER SO IF U FIND ONE PLEASE LET ME KNOW WHERE THANKS

×

5 Suggested Answers

  • 15 Answers

SOURCE: electric space heater contactor won't stay latched

Jumpered the bimetal thermostat and everything worked smoothly. Tried to clean contacts in thermostat with no luck, so ordered a replacement. At least it was cheaper than the contactor.

Posted on Dec 12, 2008

  • 2 Answers

SOURCE: Patton space Heater Model # prh-5

check that the rocker switch inside isn't stuck, when the rocker swings it shuts the unit off. if it is full of dust it may be stuck. may just be bad.

Posted on Dec 22, 2008

  • 252 Answers

SOURCE: I have 2-240V (4.2V) basebaord heaters, Need Wiring Diagram

nothing wrong w/ 10/3 @ 20A. use the red and black and don't use the white. dosent matter which is which (blk and red).

Posted on Mar 22, 2009

  • 56 Answers

SOURCE: looking for a phone number to contact PATTON SPACE

Patton at l-800-528-6600 ext. 1722 (Arizona: l-800-352-0458 ext. 1722; Alaska l-800-528-0470 ext. 1722)

Posted on Apr 01, 2009

  • 34 Answers

SOURCE: Need a thermostat for a space heater

visit this page for Lakewood parts and service center info:
http://www.lakewoodeng.com/html/parts.html

Posted on Apr 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Patton heater puh680 wiring specs


Contact Patton to request wiring diagram. Be sure to specify model puh680

Dec 10, 2016 | Heating & Cooling

1 Answer

Can I buy a heating element for this heater?


On google

Patton replace heating element Heaters Questions ... - Fixya

www.fixya.com > Forum > Tags > replace heating element > Heaters
Patton heaters replace heating element related questions and answers. Ask yourPatton ... I can't seem to find a phone number for the manufacturer to call for parts. Any help? ... Question about PQH307UM Electric Utility Heater. 1 Answer ...

Patton PQH307UM Electric Utility Heater Quartz elements ...

www.fixya.com > ... > Patton > Patton PQH307UM Electric Utility Heater
Patton PQH307UM Electric Utility Heater, quartz elements replacement related ...Element. Where can I find replacement quartz tube heating. Element Infrared ...

Patton PQH307UM Electric Utility Heater Element ... - Fixya

www.fixya.com > ... > Patton > Patton PQH307UM Electric Utility Heater
Patton PQH307UM Electric Utility Heater, element related issues. Get free help, solutions & advice from top Patton experts. ... The heating element is above the thermostat, and all you will see is a round disc with two wires attaching to. Ad.

Patton PUH680-U Utility Heater Replacement fan motor ...


Jan 19, 2016 | Patton PQH307UM Electric Utility Heater

1 Answer

Wiring diagram for Dayton IKRT9 portable electric heater


Sounds like it's the on/off switch.
what colour are they. . Usually one is the power supply to the switch and the other will be the return from the switch to the load.

Check these wires with with a multi meter.

Jan 06, 2014 | Kitchen Ranges

1 Answer

Will the patton electric heater significantly raise my electric bill


1500 watts is 1.5 kilowatts. Run it for 1 hour and you have 1.5 kilowatt hours. My electricity costs .08 per kilowatt hour so, when I run my 1500 watt space heater, it costs me a whopping .12 per hour to operate. I can afford 12 cents per hour, compared to oil at $3.50 per gallon and a burner that burns up to 3 gallons per hour.

Dec 23, 2012 | Patton Electric Patton PUH680-U Electric...

2 Answers

I need a wireing diagram for two elament electric water heater. Mine runs on 220 volt, my question is what about the common or white wire where do i hook it to or do I not need it when running a 220 circut


Links below show specific wiring diagrams and explain 240V with two hot wires vrs 120V with hot and neutral wires.

Then if you have more questions, add a comment and I will fill in blanks:
http://waterheatertimer.org/How-to-wire-water-heater-thermostats.html
First diagram will be for your water heater.

http://waterheatertimer.org/B220C.html

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you via e-mail while you work on water heater or any do-it-yourself project.
Fixya is always less expensive than a service call.

Feb 17, 2011 | Reliance & 40 Gal Electric Mobile Home...

1 Answer

WH40 water heater timer: Does black wire from service box go to terminal #1 and black wire to water heater to terminal #2? Does neutral (white) from service box go to terminal #3 and neutral (white) to...


WH40 is 240Volt timer.
WH40 will not work with 120V circuit.

See WH40 wiring illustration at following link:
http://waterheatertimer.org/How-to-wire-EH40-hot-water-heater-timer.html

There are two hot wires in 240V circuit because every circuit requires two wires to complete the circuit.
Hot wires from breaker connect to terminal 1 and 3.
Notice that small white wires are also connected to terminals 1 and 3.
Small white wires power clock motor located on back of mechanism, so this says power from breaker box must arrive on terminals 1 and 3. This insures that clock motor runs continuously.
If clock motor only runs when manual override switch is clicked ON, then your Hot and Load wires are reversed.

Bare ground wire connects to green ground screw.
Wires going to Load (water heater) connect to terminals 2 and 4.

FYI: Terminal A is not used unless circuit also has a Neutral wire,
See basic water heater circuit Diagram #2:
http://waterheatertimer.org/240-v-water-heater-circuit.html

Terminal A is also used if you want to convert WH40 to 120V timer by replacing 240V clock with 120V clock.
How to convert Intermatic 240V timer to 120V timer
http://www.fixya.com/support/t7353947-intermatic_timer_wg

Dec 24, 2010 | Electric Intermatic Inc Wh40 Water Heater...

1 Answer

I have a Et 70115C Intermatic Timer, I want to install it on my Hot Water Heater, I have connected the 2 110V leads from my breaker to Terminals 1 & 2 and connected the two leads from the hot water...


A) 5 terminal ET70115C.
Voltage selector set to 240.

B) BUT you say you have 120Volts from breaker >>> confusing, so I'm proceeding on basis that you meant to say 240V from breaker.
Add a comment at any time.

C) Review timer:
5-terminal ET70115 timer has NO and NC terminals
NC is normally closed >> this terminal has power when timer is OFF
NO is normally open >> this terminals has power when timer turns ON
For water heater, you want NO terminal 4 so water heater turns ON when timer turns ON

D) Wire for 240Volt water heater

Two hot wires from breaker connect to terminals 1 and 2. This powers timer clock.
Jumper wire connects between terminal 2 to terminal 3. This sends power to the switch circuit.
Wires to water heater connect to terminals 1 and 4

E) 5-terminal timer turns off 1 hot wire to 240V water heater.
Turning off 1 hot wire will stop 240V circuit from working; Water heater thermostats also turn off one hot wire.
240V water heater has black and red wire.
Wire from terminal 4 should connect to Black wire on water heater.

Diagram shows two wires on terminal 1
Two wires on terminal 2
One jumper wire on terminal 3
One wire on terminal 4
Zero wires on terminal 5


geno_3245_133.jpg

Dec 03, 2010 | Intermatic ET70115C Electronic Energy...

1 Answer

Looking for a phone number to contact PATTON SPACE HEATER COMPANY


Patton at l-800-528-6600 ext. 1722 (Arizona: l-800-352-0458 ext. 1722; Alaska l-800-528-0470 ext. 1722)

Apr 01, 2009 | Patton Electric Patton PUH680-U Electric...

2 Answers

I have 2-240V (4.2V) basebaord heaters, Need Wiring Diagram


you get 120V from any phase (black OR red) to neutral
you get 240V from phase to phase (between black and red) and in this scenario you don't need the white wire.
So for you, connect the black to 1 pole of the breaker and the red to the other pole, connect the green wire to the ground strip and you are done.
A white wire is NEVER connected to a circuit breaker anyway, it is a grounded wire, it would be like connecting a green wire to a black wire, bad idea.
the National electrical code specifies red and black wire color for 240VAC circuits.
As Ask Hank mentionned, nothing wrong with 10/3 wire.

Mar 22, 2009 | Fahrenheat Electric Hydronic Baseboard...

4 Answers

Properly installed electric baseboard heater won't work.


I am an electrician. You must measure the voltage across the black and red wires. Measuring each wire to the neutral will not cut it. If both your red and black wire are on the same phase the heater will not work.

To double check your wiring, measure the voltage across the two screws feeding your subpanel, they should be 240v or 208v depending on your power company. Then do the same at the breaker feeding your thermostat. Again it should read 240v.

If you have no potential across the screws it is possible that you installed an incorrect breaker. Not all breakers with two screws on them are 240v breakers. There is what is called a twin or split breaker that has two screws that are on the same phase. These are for wiring two 110v circuits, when you run out of spaces in the panel.

Double check everything. This is a relatively easy circuit to wire, even for homeowners. If the heater does not work them something is wrong so do not leave the circuit energized.

Nov 22, 2008 | Fahrenheat Electric Convector Baseboard...

Not finding what you are looking for?
Patton Electric Patton PUH680-U Electric Utility Heater 1500-Watt Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Patton Electric Heating & Cooling Experts

paulcarew

Level 3 Expert

2179 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Patton Electric Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...