Question about Broksonic DVCR-810 DVD Player/VCR

Open Question

Broksonic dvd/vcr combo - "incorrect disc" error

When I put a DVD in, it reads it and then comes up with an "incorrect disc" error...it worked perfectly fine until now. I have tried several DVDs. Please let me know what I can do. Thanks

Posted by on

5 Suggested Answers

SOURCE: broksonic dvd/vhs combo

how do u get the dvd part for a broksonic dvd/vhs combo i need to replace the dvd part it doesnt work and how much does it cost

Posted on Mar 13, 2008

SOURCE: Incorrect Disc message comes on when inserting a DVD

Clean the laser lens

Posted on Jul 06, 2008

pgh_pa_guy
  • 2992 Answers

SOURCE: Can't change output on DVD from channel 3 to 4

Unfortunately, Broksonic's website doesn't offer manual downloads. But product information for the 810C and 810D both say the output is channel 3/4 switchable. So if there isn't a rear panel switch (or one hiding somewhere else on the unit), it must be through a setup menu via the remote control. If you have the remote it shouldn't be too much trouble to experiment with the options until you find the right menu. If you didn't get the remote along with the unit, you are probably going to have to live with whatever channel it's on already.

Posted on Nov 30, 2008

  • 1 Answer

SOURCE: dubbing vhs to dvd

Please thank Stu for scanning this. I have uploaded the manual to my personal web page. Just click the link and the word document will download. (why is it so hard to record with this thing? Shouldn't there just be one button? Broksonic has taken years off my life, but not anymore)

http://scolradio.com/BroksonicDRVCR900serA.doc


your welcome,
PGD

Posted on Jun 27, 2009

AJIN G
  • 6370 Answers

SOURCE: i have a broksonic vcr dvd combo and need a code

hi,
u didn't mentioned any thing about which remote do u have. without the brand of the remote , how can u get a better solution.
ok

Posted on Dec 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jvc ht-xvc20u VCR/DVD combo player says "incorrect disc" error message every disc i try.


Have you tried a cleaner yet? It could be something as basic as needing the lens/compartment cleaned. They sell these kits at most retailers for less than $20. It is also possible them lens itself got scratched or cracked, especially of you've moved the unit recently. 5_19_2014_1_13_30_pm.png

Aug 04, 2013 | Televison & Video

3 Answers

Sansui DVD Vcr combo wont play Dvd's model no. VrdVD4005


you will need to run a cleaning disk in it , if that won't work then it will have to be taken apart to clean the laser eye manually
which then if you can't do this then you will need to take it to a local repair shop where they can do it

electech

Oct 26, 2008 | Sansui VRDVD4005 DVD Player/VCR

1 Answer

How can I play a disc reading incorrect and error It worked fine this morning


Try some other discs first or try that on another player, usually if cannot read the disc either a dirty of bad Optical Pickup in the player.

Dec 16, 2012 | Toshiba SD-V291 DVD Player/VCR

1 Answer

How do i set the out put channel on a broksonice dvd/vcr combo


Turn off the combo. Press and hold the number 3 or 4 on the remote. When 3rf or 4rf appears in the display on the combo, the output channel is set.

Jun 30, 2011 | Broksonic DRVCR900 DVD Recorder/VCR

1 Answer

I have a Sanyo remote,RMT-U110,I entered the codes for the vcr,a broksonic mod.dvcr 810a,these codes do nothing for the vcr it wll not work.


Most universal remotes that I have dealt with will not be able to fully control a combo unit(DVD/VCR) the basic functions of a VCR and DVD player are the same so the remote cannot isolate/diffrentiate the commands from one another. Good luck !

Nov 26, 2009 | Broksonic DVCR-810 DVD Player/VCR

1 Answer

Sd-v392 claims incorrect disc on most dvd`s


I removed the cover,the dvd unit and cleaned the laser lens with alcohal. The two back screws were loose on the dvd unit. It`s working like new again.

Sep 18, 2009 | Toshiba SD-V392 DVD Player/VCR

1 Answer

Disc Error with all DVDs


Back to shop................

Feb 12, 2009 | LG V181 DVD Player/VCR

1 Answer

Some blank DVD+R discs will not read on my DVD player


The JVC DR-MV1S DVD Recorder / VCR Combo does not suppport DVD+R, only DVD-R, -RW etc.
At least mine only supports these formats, as when I first bought mine, I got some blank DVD's they were DVD+R.
I recorded a movie onto one on my PC, then tried playing it in the JVC unit... no go!
Instruction manual (available for D/load online) proved to me that I could not play +R disks!!

Jun 11, 2008 | JVC DR-MV1S DVD Recorder/VCR

1 Answer

Broksonic dvd/vhs combo


how do u get the dvd part for a broksonic dvd/vhs combo i need to replace the dvd part it doesnt work and how much does it cost

Feb 15, 2008 | Broksonic DRVCR900 DVD Recorder/VCR

1 Answer

Jvc dvd/video recorder


Time for some laser work. You have a disc read error...accordianman

Oct 02, 2007 | GoVideo DVD-VCR Combo

Not finding what you are looking for?
Broksonic DVCR-810 DVD Player/VCR Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Broksonic Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69718 Answers

Cindy Wells

Level 3 Expert

4801 Answers

yadayada
yadayada

Level 3 Expert

63637 Answers

Are you a Broksonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...