Question about Panasonic (CF61-TPAD) for Toughbook CF-61 (CF61TPAD)

2 Answers

Panasonic cf-61 is password locked

When computer starts it ask for password, don't know what the password is and keyboard will not show any results from typing

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Is the no way to reset the tablet

Posted on Jan 10, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 133 Answers

Firstly is it the password immediatly u switch on or when loading windows, if it during loading of windows unless reinstall windows again and select repair while installing just after pressing F8 in EULA screen

or if its a BIO's password try this:

WARNING: U need to see a technician be remove the password, if its a system password in the BIO'S setup. if u can and thats if u are sure you can do the following.
1. Open the computer system unit
2. On the motherboard locate for a jumper written clear CMOS
3. remove the jumper and switch on the computer.
4. Switch it off again and replace the jumper back.
Note that the setup configaration will go back to default settings, so any other settings u had done u have to redo again

Posted on Mar 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i unlock my trio stealth G2


It may be that a hard reset is your only solution - but I'm not even sure that you can initiate that without the password. You would lose all information stored - I hope you have a recent backup. Instructions for hard reset can be found at http://forum.xda-developers.com/showthread.php?t=2587570

May 08, 2014 | Graphics Tablets

1 Answer

I have forgotten my password what do i do


Guide on how to crack Windows 7 password with Windows Password Recovery Professional. Step1: Download Windows Password Recovery Professional from http://www.recoverlostpassword.com/products/windowspasswordrecovery.html.
Step2: Install and launch it to any accessible computer.
Step3: Use a blank and writable CD/DVD/USB to burn Windows 7 password reset disk with the tool.
Step4: Boot the locked computer from CD/DVD/USB.
Step5: Start to remove Windows 7 password with the burned disk.
Step6: Reboot computer and login to the locked PC without password.

Sep 24, 2012 | ViewSonic ViewPad 7 Multitouch tablet

1 Answer

Panasonic interactive whiteboard won't project computer


If you'd like to email me at bruce.brassington@n-vest.co.uk I'll be able to help you in more detail. There's a fundamental error to the question here. That is the board in itself will not show the image - your boards is effectively a large flat mouse. A pointing device infact. The peice of equipment that "shows" your PC image is actually the projector. There could be several reasons why your projector isn't showing the image.
1 - is there either a VGA or HDMI cable connected from your laptop/PC to the projector (Sometimes via a wall plate).
2 If 1 is true and the projector is turned on does it show any sort of image? Now there are two thongs you can do from here. a) If you have a laptop check to see if your Video settings are set to clone across to a secondary monitor on most laptops you should hold down Function key and F8 this will toggle through three options Onboard screen remote screen and then both. there could be some lag between the two so hold down fucntio at the same time press F8 then wait a few seconds then go again.
Finally on you projector remote there may be an auto search buttion which will hunt for your PC image by checking each of the Projector inputs in turn. Generally speaking however you should select "Computer 1" or sometimes named as RGB 1

Hope that helps email me if your still having problems.

Aug 21, 2012 | Panasonic Panaboard Ub-T880 Interactive...

2 Answers

How can i fix my not working touch pad?


The information provided is somewhat limited, however, here are a few things to consider.
1.) Check for a touchpad button located immediately above the touchpad itself. Some laptops have this and some don't. If your laptop has this, try pressing it once since it is the ON/OFF button for the touchpad.
2.) It's possible you're experiencing a settings issue. Rather than trying to weed out the specific issue, it would be much easier to do a system restore and revert your system settings back to when the touchpad worked. Goto Start/All Programs (or just Programs)/Accessories/System Tools/System Restore. You want to choose a System Restore date that is BEFORE your issue started. System Restore can take up to 15-20 minutes and should not be interrupted. Just set your oven timer for 20 min and come back after it dings to test your touchpad.
3.) You could have a driver issue. You'll want to check Device Manager for this. In Windows XP, click on Start, RIGHT-click on My Computer, click on Properties, click on the Hardware tab, click on the Device Manager button. In Vista, click Start, RIGHT-click Computer, click Properties, click Device Manager (the link in the upper-left corner of the System Properties window). If you see any yellow question marks or exclamation points anywhere in this list, it's likely your touchpad driver needs reinstalled. Check your manufacturers website for the latest driver.
4.) If none of the above work, you may need to replace the touchpad (or just use a USB mouse).
I hope that helps and best of luck!

Sep 21, 2011 | Compaq (153515-001) Touch Pad

1 Answer

I have a smudge on my Panaboard and would like to clean it but don't know what I can use? Any suggestions?


All Panasonics can have a moist cloth or even a little metholated spirits on the screen. Occasionally a machine has a heavy bump which causes a greying effect between the two layers of the screen- you will NOT be able to remove the discolouring if that has happened. By the way- NEVER use whiteboard cleaning fluids on the screen- use water or a moist cloth for tough cleaning jobs-metho if desperate. Never use whiteboard cleaners on any whiteboard. Their job is to eat the surface so that you always need to use them.

Sep 19, 2011 | Panasonic Panaboard UB-5815

1 Answer

The red light is on the SMART Board 580 and we need to fix the connection so it shows green but don't know how to do this.


Find "SMART Board Tools" or "SMART Board Tools 2011" on your computer. Select Control Panel > About Software and Product Support > Tools > Diagnostics. From the menu select Service and then Start.
If the red light does not change to green, try the following steps located located here: http://preview.tinyurl.com/3qggntc
Ian Berg

Technical Support Specialist

SMART Technologies
http://www.smarttech.com/tcea

Aug 17, 2011 | Smart Technologies SMART Board 580 (SB580)

1 Answer

Panasonic laptop cf-61


I found these links below they should be of some help... tech.yahoo.com/gd/setting-up-your-laptop/153197 mobileoffice.about.com/od/laptopstabletpcs/ gr/bkrwlaptops.htm

Sep 03, 2007 | Panasonic (CF61-TPAD) for Toughbook CF-61...

Not finding what you are looking for?
Graphics Tablets Logo

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Graphics Tablets Experts

jeff5may32

Level 3 Expert

1203 Answers

b0b789

Level 1 Expert

9 Answers

Bob Sloan

Level 3 Expert

2013 Answers

Are you a Panasonic Graphics Tablet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...