Question about Whirlpool RBD305PD Electric Double Oven

2 Answers

Error Code E1F2

We just replaced the ERC for our double ovens and they were working fine for a few days and now we are getting error code E1F2 and the touchpad doesn't seem to be functioning. Do you have any help for us on this one?

Posted by on

  • ChristyBruce Mar 01, 2008

    It looks like we need to replace the keypad. We just replaced the control and were hoping that we wouldn't need to replace both. Thanks!

  • Megan W
    Megan W May 05, 2017

    If the touchpad for your Whirlpool oven is no longer manufactured or obsolete, Ledgestone Technologies makes a replacement membrane backed by a 2 year warranty. Keep your oven out of the landfill!
    http://fixyourboard.com/ledgestone.htmlhttps://www.youtube.com/watch?v=YylBTJYB...

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Dedicated:

    Visited the website for 20 consecutive days.

  • Whirlpool Expert
  • 84 Answers

If the touchpad for your Whirlpool oven is no longer manufactured or obsolete, Ledgestone Technologies makes a replacement membrane backed by a 2 year warranty. Keep your oven out of the landfill!

http://fixyourboard.com/ledgestone.html
Ledgestone Technologies Keypad and Ribbon Cable Installation

Posted on May 05, 2017

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Whirlpool Master
  • 2,651 Answers

Looked up tech sheet for this model and it states E1F2 - keypad connection not detected.. check connection, press cancel if returns in 60 secs replace keypad.then lists to replace control.

Posted on Mar 01, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have whirlpool buil in oven it gave us s6f2 we replace. A new board it worked for 1 minute and then gave us code e1f2 what do we do now.thank you


An E1-F2 Error is a "ribbon cable not connected" Error.
It is a keypad related issue. Try cleaning the ends of the ribbon cable, the plastic strip which comes from the keypad and clips into the control board, lightly with a pencil eraser. ( http://www.fixyourboard.com/techzone/ovens/keypad_tail_clean/keypad_tail_clean.html ) Often, the contacts become corroded and will cause an E1F2 error code. Also double check that the ribbon cable is attached straight and secure in the connector. https://www.youtube.com/watch?v=YylBTJYBlGk - watch this video from the 1 minute mark. It will help you with the the ribbon cable. Inspect the ribbon for creases; if it's creased, an E1F2 error doesnt cease, or buttons do not respond, the keypad is faulty.

If youre looking for a replacement Whirlpool touchpad but notice that they're no longer manufactured, Ledgestone Technologies makes nice replacements.
http://fixyourboard.com/ledgestone.html

May 06, 2017 | Whirlpool Ovens

1 Answer

I have a GE double wall oven. I have a F7 errot on display. I unplugged the ribbon cable and shortly recieved a F0 error code on both the upper and lower side of the display. I replaced the ERC. it...


Hello,

The F7 error coode means either the ERC or touch pad is bad. Having already replaced the ERC,replace the touch pad(the part w/the ribbon cable)

Gene

Aug 04, 2011 | GE Ovens

1 Answer

GE model # jkp27 error code F1 what should I do?


Hi ssantillo,

Usually F1 error code means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be cancelled, replace the oven control (also called clock or ERC), touch pad, or both.

Hope this helps.

Thank you for using FixYa.

Apr 27, 2011 | GE JKP27 Electric Double Oven

1 Answer

I have a Dacor double oven that gives a error message of F0 and then shuts itself off.I don't have the manual so I don't know what this error code means or how to fix it.HELP!


F0 means shorted keypad or stuck key on keypad.
Solution: The membrane aka keypad has to be replaced.
There's a slight chance that the ERC aka oven controller is acting up also.
So safest bet replace both, ERC and membrane.

Dec 24, 2010 | Dacor ECD227 Epicure Electric Double Oven

1 Answer

Error code - F0


F0 Stuck touch pad Usually means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be cancelled, replace the oven control (also called clock or ERC), touch pad, or both.

Sep 14, 2010 | GE Profile JTP56 Electric Double Oven

1 Answer

Error code -F1- and broken glass door in lower oven


Here is some wisdom for understanding F1 fault codes.

In some models, there are subcodes that make diagnosis even easier.

Here's a simple explanation of what's going on and how to troubleshoot:

The F1 code indicates that:


a. The electronic range control (ERC) is sensing heat in the oven when in a time-of-day (i.e., not cooking) mode.

b. The ERC is receiving information to run multiple heat functions simultaneously.


Although different components (depending upon the model) could generate the code, simple and straightforward testing using your ohm meter is all you gotta do to test for it.

1. Check the oven temperature sensor. The oven sensor has to be within spec or it will cause the F1 code.
As an example of being out-of-spec, the ERC will generate an F1 fault code when the sensor shows 1650 ohms during a time-of-day mode.
This is equivalent to 350°F in the oven.
The resistance isn't high enough to generate an F2 code (runaway temp) or an F3 or F4 code (shorted/open sensor circuit).
The ERC monitors the sensor circuit after a heat cycle and expects the resistance to drop back to 1050-1100 ohms.
The fault code is generated when this doesn't happen. Checking the sensor circuit means also checking the harness,
harness connections and the sensor itself.

2. If the oven sensor circuit checks okay, then turn your inquisitive eyeballs to the touchpad.
If the range has a separate touchpad/keyboard, the keypad may have moisture that is shorting several circuits simultaneously.
If the F1 code is given immediately (instead of during or after a heat cycle),
remove the ribbon connector from the touchpad to the ERC after clearing the F1 code. If the F1 code does not return in five minutes,
then cast a suspicious gaze upon the touchpad/keyboard. Shorts may be caused by using an ammonia-based glass cleaner.
The touchpad surface will absorb ammonia-based cleaners that are sprayed directly on the glass surface. When heat is applied,
the surface material can break down causing shorts.
If you're gonna use ammonia-based cleaners on your control panel, then you should spray it on the rag and then wipe the touchpanel
-don't spray directly onto the surface of the touchpad.

3. On Amana ranges with a rotary temperature dial, be sure that the knob is in the OFF position when performing tests.

4. If these tests all check good, then replace the ERC.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
@$#Y^T

Apr 19, 2010 | GE Profile JTP56 Electric Double Oven

1 Answer

My oven has an error code of F7. what is the problem?


Hello there
Any time that you get the f7 error this means
F7 Shorted Clear/Off Key due to membrane switch, control or connector Shorted key panel membrane switch; Check Electronic Range Control (ERC)
repair or replace keypad switxh or erc circuit




Mar 23, 2010 | GE PT956CMCC Profile 30" Built-In Double...

1 Answer

F1 error code and constant beeping and oven shuts off.


Hi gwhiz03,

If you are having error code F1 with your Jenn-Air double wall oven this is because you have a defective touch pad or clock (ERC). This simple test will help determine whether the ERC (Electronic Range Control or Clock) or the touch pad is defective when F1 error code is present.

Note: Some models incorporate the touch pad in to the ERC as a single assembly, in which case this test is not necessary. Simply replace the ERC (Clock).

Warning: If you feel in any way uncomfortable performing this test or making this repair, please contact a qualified appliance repair technician.

1. Disconnect power to the range (unplug the range power cord or turn the power off to the range at the circuit breaker). It is very important that the power to the range has been disconnected, so please double check before continuing.
2. Gain access inside the control panel.
3. Disconnect the touch pad (also called keypad or membrane switch) ribbon from the ERC.
4. Make sure there are no lose wires, or anything else that may cause a short when power is turned back on. Assemble the control panel back the way it was.
5. Turn the power back on.
6. Wait for at least one hour to see if the F1 code comes back (usually accompanied by a beeping sound).
7. If F1 comes back, replace the ERC. If it does not, replace the touch pad.

Hope this helps.

Thank you for using FixYa.

Feb 10, 2010 | Jenn-Air WW30430P Stainless Steel Electric...

1 Answer

The F7 code appears with a beeping noise. How do I turn off the beep for good.... selecting clear/off only works for a few seconds


Hi,

Well, F7 error code occures due to
A = Function pad button stuck or 
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)

Replace the ERC there are ten screws 3 on each side and 4 on the control leave the hex screws alone all you need is a phillip screwdriver.
REMEMBER TO SHUT OFF THE POWER FIRST lift and fold out the control panel remove the ribbon cable and remove the four screws that hold the control board . replace control panel in reverse order.

Thanks

May 27, 2009 | GE Built-In 24" Double Electric Wall Oven

2 Answers

Oven temperature..


Main support number->1-800-735-5547

These people will be able to help you out.But i strongly believe this error code requires a service.Do you have a user manual for this product anyway?

May 03, 2008 | Thermador SEC302 Electric Double Oven

Not finding what you are looking for?
Whirlpool RBD305PD Electric Double Oven Logo

Related Topics:

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

Sal De

Level 3 Expert

2699 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...