Question about Frigidaire FEF336BC Electric Kitchen Range

2 Answers

Oven not heating up

Hi Guys,

I have a frigidaire electic oven - all four top elements work - the top element in the oven seems to work - am getting no heat on the bottom element - when I try to preheat the oven - there is no alert on the oven when the oven is up to its proper tempature. I suspect its a faulty bottom element.

Thoughts/comments?

Posted by on

  • 7 more comments 
  • foxhunter Mar 01, 2008

    I tried preheating the oven which usually takes about 10 mins...and when I went to touch the bottom element - I felt no heat - I also noticed it has now broken in the corner of the element - in other words - it's now split - when I put the broil function on - I can see the top element red hot and no heat on the bottom element - obviously the bottom element is at fault? If it is the bottom element - is it just a matter of unscrewing the nuts on the back plate of the element and replacing the element and it should fix the problem?

  • foxhunter Mar 02, 2008

    Hi Guys,



    I took the faulty element into home depot and got a replacement one - will install it tomorrow and everything should be licky spit...thanks for the help.



    Fox

  • Anonymous Apr 21, 2008

    Have the same issue with my stove- frigidaire - only about 1 yr old and minimal use. Going to see if replacing the element fixes it.




  • Anonymous Apr 14, 2009

    THATS MY PROBLEM TOO

  • Anonymous Mar 26, 2014

    The oven is not heating properly since the sparks.

  • Anonymous Mar 29, 2014

    While surface elements work fine, the oven will only get warm. the top broil element will not heat at all

  • Anonymous Mar 31, 2014

    I push button for desired temp, but nothing is happening inside the oven. Neither heating element will heat.

  • Anonymous Mar 31, 2014

    Mt oven stopped working. looks like the heating element, but also the connector behind the element. Any suggestions?

  • Anonymous Mar 31, 2014

    Oven heating element

×

2 Answers

I don't have a suggestion for your problem but maybe you can help with mine. I have a Kenmore electric oven/range and neither will produce heat. I've got power goin to the elements and the continuity across them is ok. Is there maybe a fuse in the control panel that may be blown or could it possibly be grounding out somewhere? It doesn't make sense to me that if the elements are ok and I've got power what could possibly be wrong. Any suggestions?

Hick

Posted on May 11, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Frigidaire Master
  • 2,651 Answers

Can you see the bottom element?? if so usually , its obvious when the element goes bad, youll see the damage.TURN OFF POWER. 2 screws remove elemnet from the front 2 wires, plug in aa new one and your good

Posted on Mar 01, 2008

  • Ron Coons
    Ron Coons Mar 01, 2008

    TURN OFF POWER.THE ELEMENT WIRE IS LIVE AT ALL TIMES. 2 screws remove elemnet from the front 2 wires, plug in a new one and your good

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oven temperature will not cycle


How To Fix Oven With Little or No Heat When Baking ...

www.partselect.com/Repair/Range-Stove-Oven/No-Heat-When-Baking/
Repairing a range, oven, or stove can seem like a big task, but our ... Most electric ovens use both the bake element and the broil element in a bake cycle, with the bake... If the bake element isn't working, the oven may not reach the set temperature or ...If the element appears to look normal, then turn the oven on to a bake ...

Electric Stove Repair ' Electric Oven Repair Manual ...

www.appliancerepair.net/oven-repair-4.html
Inside the oven, the heating element is called a "bake" or "broil" element. ... To maintain a set temperature in an electric cooktop, the element is cycled on ... Do not put any cleaning agents or solvents directly on heater elements or surface units. ... A switch will show no continuity when off and good continuity when turned on.

Electric Oven Will Not Heat ' RemoveandReplace.com

removeandreplace.com/2015/.../oven-not-heating-how-to-fix-range-repa...
Aug 24, 2015 - The issue is most likely a bad internal fuse, oven temp sensor, ... oven replacement parts ... Bake and Broil Element Test - Electric Oven Repair ... Dryer Spins But No Heat - How To Troubleshoot Dryer is turning the drum but ... If your dishwasher is completing the wash cycle but will not dry your dishes, we ...

Oven Temperature Not Accurate - Repair Parts ...


Jan 28, 2016 | Frigidaire Ovens

1 Answer

Early 1960's Frigidaire 24" Double wall oven not heating


Hello Chris Hammond, thanks for your post!

Based off the information you have provided it sounds like a potential problem with your connector for your element within your Frigidaire wall oven. I would recommend reaching out to a professional technician for proper diagnosis repair to help avoid any unnecessary part purchases. Best of luck! -Matt

Nov 07, 2014 | Ovens

1 Answer

My Frigidaire GLEB30T8CSA top oven lower heating unit isn't getting hot, I checked wires coming to heating element one side shows 120v but the other side does not, so I think whatever that wire hooks to is...


Hi,
If your electric2_bing.gif oven is not heating then you probably have a bad heating element in your oven. This is not that hard to fix yourself...
Check out this tip that I wrote about the Oven not heating problem..

Oven Problems Electric2_bing.gif Oven is Heating Slowly or Poorly
http://www.fixya.com/support/r4511800-oven_problems_electric_oven_heating

heatman101

May 18, 2010 | Kitchen Ranges

1 Answer

The oven does'nt seem to be able to heat up above 150, the fan is working, the bottem half of the oven does'nt seem to heating up. Is this fixable or do i need a new oven?


Hi.

If the part that is not heating is only the bottom element, and the top element is heating regularly, then you may need to replace the lower element.
Before replacement the element can be tested removing it from the cavity and reading Ohms at the element terminals, with a multimeter set at Rx1. Disconnect power before removing the element.

If both baking and broiling element do not heath above a certain temperature instead, then the part to be replaced is the temperature probe, still located inside the oven cavity.

Regards.

Mar 04, 2010 | Whirlpool RBS275PD Electric Single Oven

1 Answer

Oven doesn't reach temperature setting


It could be the plug/receptacle that the element plugs into. It could also be that the elements have separate thermostats and that the one for the lower element is bad. If you can post the model number I can look at the electrical schematic and know for sure if it has one or two thermostats.

Aug 31, 2009 | Frigidaire 30 in. Electric Double...

1 Answer

My frigidaire oven won't heat. The burners work


You have two elements turn on the broil and see if the top element comes on if it does replace the bottom element.

Aug 23, 2009 | Frigidaire Ovens

1 Answer

I have 1950's Frigidaire electic oven by General Motors and the top heating element is broken. Where might I find a replacement?


Partselect.com had the oven element for my '60s Frigidaire GM stove. They have a good "narrow your search" feature that was helpful as the model number is no longer recognized.
Give them a try. Pull your bad element and measure it to get a match.

Jul 11, 2009 | Ovens

1 Answer

Heat elements in oven/broiler do not heat up


I would say to go and reset your curciut breaker first if this is a electric oven. needs 220 volts for both element to work

Jan 03, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

3 Answers

Frigidaire GM deluxe electri dean (electric oven wall unit)


if you feel through the insulation you can find the two wires that attach to the element pull them through to plug the element back on but there is no plug per say but first are you sure the element is good were there no wires on the element when you removed it should have been two spade connectors with wires on them attached to the element hold my rating till you reply

Jan 11, 2008 | Frigidaire FEB27S5A Electric Single Oven

Not finding what you are looking for?
Frigidaire FEF336BC Electric Kitchen Range Logo

1,137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...