Pip - Televison & Video

How to turn on PIP in Samsung TV SAMSUNG STEP 1. OPENING MENU SETTINGS


Click here to know about PIP in Samsung TV.
a). Press MENU key ( ) from TV remote.



b). Select Picture option and press ENTER key ( ) from TV remote.



c). Select PIP option and press ENTER key ( ) from TV remote control.

STEP 2. TURNING ON PIP SETTINGS

d). PIP window will open on TV screen. Select PIP and press ENTER key ( ) from TV remote control.



e). Select On option and press ENTER key ( ) from TV remote control.



f). Enjoy watching PIP screen.

Some of the older sets with PIP require only the original remote to operate or turn on and off.

The PIP board usually develops problems with surface mounted caps and there is a "modification" where traces are cut and two 4.7 mfd caps inserted which will bypass the PIP board from the set--a model number would tell me if this is possible in your set or not--you missing the original remote? Almost any Mitsubishi remote of the era with PIP controls should do the job.

yes, it has pip. Use the menu to select the pip setting.

somw sets you need to set up in the set-up menu what signal source is shown in the pip box. to turn it off push the pip button on the remote once

OK, I think I've got this fixed for mine now. Go to the OSD menu, Video Input Controls, PiP Control, PiP Size, and select PiP OFF. I think I must have been getting noise on the composite video input that was causing the PiP field to display sometimes.

To you pip usually you can PIP with two HiDef inputs as its too much stress on the processor to deal with. for example you can pip a scart and an HDMI/Component source, or you can PIP from 2 scarts no problem, just not with two hiDef sources.
So with the loss of a normal (SD) signal now this may be a reason you cant PIP.
Hope this helps in some way...

try using it to monitor your dvd selecting av channel ...

I know that on my Protron the pip does not work for different TV channels, only for vcr or dvd. I can get pip from those sources.

When you go into the menu to choose the PIP source the PIP comes on to confirm that a valid source has been selected. It is normal for the PIP to close when the menu is exited. To display the PIP normally you will need a remote with a PIP button. Most universal remotes today have PIP functions but if you get a Zenith original replacement then you are guaranteed to enjoy the other PIP features such as size, position, freeze and swap.

If you have the original remote for this TV on the pip menu (left side slider on remote all the way up) there is a pip off button. If you unplug the unit long enough it should go back to normal. If you go into demo mode and then exit mode you will again be out of the pip. With out the original remote you cannot easily turn pip off.