Question about Proscan PS35660 TV

2 Answers

Audio not working on proscan ps61700

We was watching tv with audio, then it quit working, ive tried hooking up external speakers to the rear speaker jacks on the tv, but still didnt work, ive tried a vhs tape, rabbit ears antenna, dvd, and direct tv, still no sound, however it does have some static coming through what ever speaker is hooked up, (the stock internal skrs or the ceiling speakers) does anyone have a suggestion for this.. the picture is great, but no sound

Posted by on

  • shestheone Aug 18, 2008

    Sound just stopped working and we've tried everything.

  • rufryder911 Nov 03, 2008

    I have the same exact problem. I tested the speakers they are working it has to do with something else but I can't figure out what it could be. Please help me out with this issue.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Aug 19, 2010: I have an older (10+ years old) RCA ProScan 32" set that lost audio as well. The "unplug for a few minutes" and repower WORKED to restore sound. As an Electrical Engineer, this tells me they had an electronic "latch-up problem" that only could successfully delatch due to loss of power (i.e. the ReBoot to fix the Windows Blue-Screen-of-Death thing). My guess is an NVM (Non-Volatile Memory) problem of some sort, or a sticky latch transistor circuit that was tied to standby power (so as not to delatch without full removal of AC Power Input).

Posted on Aug 19, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a GE 46 in TV that had the same occurrence. I believe it is a sign that the amplifier is overheated or stressed. The way I fixed mine was to unplug TV and leave off for a few minutes -then plug in. I discovered this by accident when the power went off one day and the sound returned (had been using my vcr audio output plugged into my stereo for weeks!) This fix will work for weeks-sometimes months-evidently resets the circuits inside the amp somehow. Last time this happened I also removed the back of TV and blew out the dust with compressed air while it was unplugged-still have sound 4 months later without a "reset"-so I'm guessing it did help .

Posted on Jan 08, 2009

4 Suggested Answers

  • 236 Answers

SOURCE: White Noise Sound

Your problem is somewhere between the tuner and video detector circuit. The signal entering your TV carries: video,red color,and blue color as well as sychronizing pulses for color and horizontal and vertical deflection ( actually vertical sync. is derived from horizontal sync.) along with burst pulses to synchronize the color. After all these, the sound is an fm signal entwined with a pilot signal for stereo audio. WHAT a mess! After the audio passes through all this, it is detected and sent to the audio processor. If any frequency has drifted away from it's value then you loose the sound. SO... your problem could be in any of the tuned circuits or in the audio processor IC (chip). Any component changing value could creat this problem. Most likely the audio processor IC. You'd need to have the set checked out by a tech to find your problem. Stargazer

Posted on Mar 11, 2007

DOCTOR VIDEO
  • 131 Answers

SOURCE: No Audio, picture fine

this is a very common problem just unplug tv for 5 minutes it
should fix it . simple fix most of the time with rca and proscan.
If that does not do it go into menu scroll down to audio and then press on .


thanks doctor video leading edge electronics

Posted on Apr 28, 2008

  • 226 Answers

SOURCE: cant get picture or sound...Proscan 27113

You can tune to 90 for input 1 S-video, 91 for input 1 composite and 92 for input 2 composite only.
Most RCA and GE brand replacement remotes will work using code 000, or 001. I use code 237 for my 5 in 1 remote and can get PIP and the setup displays to work.
tom

Posted on Sep 10, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rca tv ..how to hook up to home speakers


Unless the set has actual audio outputs it should not be done.

The set will have a very low audio output not intended for external systems--if you hook to wrong impedance speakers volume either will not work, be very low or even damage the audio circuit in the set

Mar 28, 2012 | RCA 27V530T 27" TV

1 Answer

I just sold my surround sound system and now I can't get the on board speakers to work.


Just check the rear of the television if by chance you have left any cable still connected to the audio output jack. If there the TV might be trying to redirect the audio to an external device not present. Sometimes it could also be a simple setting to be changed , . Check if you have a switch at the back of the TV stating External or Internal speakers. From the manual i got

A/V Receiver: The TV can detect audio connections on the DIGITAL AUDIO OUT jack and the right (red) analog AVR AUDIO OUTPUT jack.
Note for Analog A/V Receivers: When you disconnect an analog A/V receiver, manually change the Speakers setting to TV to hear sound from the TV speakers.

Press Menu on the remote-> Goto AV
Select Audio by pressing the right key
Under that the first option of Speakers -> select and set to TV.
Only then will the TV speakers play the audio.

vinayak_nair_25.jpg
Hope this Helps.

Mar 04, 2011 | Mitsubishi Televison & Video

1 Answer

How can I hook up external speakers? I have


Go to your tv menu, and make sure that your fixed audio output is selected not variable. Variable will make not work, with the television volume is turn down. When you hook the speakers, make certain that it is on a fixed audio out, not variable, as well.

Oct 27, 2009 | Zenith C34W23 34" TV

1 Answer

No Sound


try accessing your tv settings menu and look for audio settings. usually there is an adjustment that you can make for external audio speakers such as when hooking up to a sound amplifier or internal audio that accesses your internal tv speakers.

Oct 03, 2009 | Apex Digital PF2020 20" TV

1 Answer

I was watching tv, turned the channel and the sound quit. I turned off the tv for awhile and still no sound, on any channel. Is there anything I can do to fix it or do I need to take it for repair? It is a...


the speaker may have quit working. or possibly if the t.v has a headphone jack something may be in the hole causing te=he t.v to send audio to the jack instead of the speakers. if that is not it if you do have a jack for headphones you can plug in an adapter to hook up your media to an external speaker device, the first place to look is this jack, if no sound will come through your headphones either thanyou have an internal problem

Apr 07, 2009 | Sony Televison & Video

1 Answer

Want to add an external speaker to TV


If you have audio out RCA jacks then you can hook up some computer speakers that have RCA jack inputs. If you don't have audio outputs and your TV has a HOT chassis then you won't be able to do it. If your tv has a switching power supply then you can install a jack to TV speakers, so they disconect when you hook up your other speakers, if you try and hook up speaker to the TV speakers then the impedence will change, and your audio output IC will get hot and short out.

Oct 26, 2008 | Televison & Video

1 Answer

Sound Problems with JVC AV-35BP4 TV


The audio output stage for the speakers may have failed in the TV set. If the set has an earphone jack, it is also possible that the jack has a fault (very rare, but I have seen this).

Are there external speaker outputs to try other speakers?

Jerry G.

Apr 29, 2008 | Televison & Video

2 Answers

No Audio, picture fine


this is a very common problem just unplug tv for 5 minutes it
should fix it . simple fix most of the time with rca and proscan.
If that does not do it go into menu scroll down to audio and then press on .


thanks doctor video leading edge electronics

Apr 28, 2008 | Proscan PS36800HR 36" TV

1 Answer

No Sound


have you checked the switch at the back of the set (very small) that is marked internal or external speakers

Nov 10, 2007 | Proscan PS36600 36" TV

1 Answer

I have NO sound!


Check for two locations - on the back of the set itself, lower right hand side. A switch for the speakers (EXT -up-, INT -down-) should be in the down INT position for the TV's internal speakers. Also on the TV screen go to MENU> AUDIO> SPEAKERS> press enter to check the ON button. Of course the other option is a separate amp (using the rear Audio Output RCA jacks), or below that the LEFT/RIGHT external speaker connectors.

Oct 16, 2007 | Proscan PS38000 TV

Not finding what you are looking for?
Televison & Video Logo

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proscan Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69845 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Are you a Proscan Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...